PACK 100 COMBS 6MM DIA. RED > Combs are supplied in packs of 100.
Cost : £ 7.05

CABLE HOIST. MAXIMUM CAPACITY 1250KG > Can be used with a single or double lift using the unique three hook design.
> Interlocking pawl system for positive control.
> Supplied with wire rope and safety hooks.
> Test Certificate supplied.
N.B. For models with a single and double l
Cost : £ 326.65

"4 SHELF H.D STARTER BAY. SHELF DEPTH 18"" - OPEN ALL ROUND" > Four and six shelves.
> Standard or heavy duty.
> Choice of 3 shelf depths.
> Initial Bay and Add-on bays.
> Supplied with black plastic feet.
> Standard HxW: 72x36.
Cost : £ 142.12

GREY ASH STATIONERY CUPBOARD. HXWXD 1790X770X454MM > Constructed from 18mm
counter-balanced foil board.
> Supplied flat packed for easy
self-assembly.
Glass Fronted Cupboard.
> 4mm wide sliding glass doors. Glass toughened to BS 6206A.
> Fixed centre shelf.

Low Cupboard.
>Adjus
Cost : £ 232.65

300KG SINGLE SCISSOR MANUAL LIFT TABLE. TABLE HT. 840/335 > General construction and safety features as detailed on Britruck Scissor Tables specification.
> Lift heights from 840mm to 1050mm.
> Various table top sizes up to 1000mmx2000mm.
Cost : £ 735.55

FOLDING TABLE INFANT/PRE-SCHL L915XW760XH546MM SAXON OAK > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 182.13

A3 PORTRAIT LETTERBOARD 510X353MM > Grooved rubber insert to retain letters.
> Complete board can be cleaned if dirty.
> Supplied with set of characters.
Cost : £ 91.06

STANDARD SHEET RACK. CAPACITY 5 BAYS. HXWXD 1040X1400X2060MM > For the vertical storage of sheet materials. > Intermediate floor bracing for sheet support.
> Choice of units with up to 10 bays.
> Width between uprights: 160mm.
Cost : £ 897.7

11 X 120MM ZP DUTCH SNAP HOOK- OPEN EYE > Electro-galvanised mild steel.
> Quick release chain connecting link with a security locking gate.
Cost : £ 4.17

SINGLE DOOR BASE UNIT. C/W 2 SHELVES. 900X500X500MM Single door units
Cost : £ 187.35

90MM IRON BASKET CABINET KNOB “Basket“ design. Supplied complete with fixings. Carton packed. --
Cost : £ 2.02

HINGED DUST COVER >Displays clearly visible instruction on dealing with common injuries.
>Open fronted for ease of access.
>Container: 40 disinfectant wipes; 1 resiscitation kit; 1 large blood stopper; 3 mini bloodstoppers; 40 fabric plasters; 45 washproof plasters;
Cost : £ 157.45

ANTI-STATIC WORKBENCH - LAMINATE. 1500X900MM. Utilises cantilever framework for increased stability. Fully welded construction dissipates build-up. Standing working height: 840mm. Fitted with four adjustable feet. Frame: steel tube and angle section to BS 6323. 14 and 16 swg. Complete with earth gr
Cost : £ 580.86

POUCH TAPE DISPENSER. 200MM METAL > Dispensing machine for 'Documents Enclosed' pouched tape.
> Complete with heavy base.
Cost : £ 46.41

BOWL TURNING REST FOR WTL100A For use with Draper Wood Lathe Stock No. 58410. Carton packed. --
Cost : £ 13.57

BANDSAW BLADE 2235MM X 1/2''X1 For all Draper bandsaws and other manufacturers similar machines. Display packed. --
Cost : £ 12.49

Works Traffic Signs >Signs can be suspended wall mounted or displayed in s stanchion frame - see below.
>Signs prefixed with R are printed on 2mm thick high impact plastic.
>Signs prefixed with RR are printed on 3mm thick rigid reflective plastic. For use on-site and
Cost : £ 79.9

760MM STEEL LOWER SHELF.WIDTH 1500MM > Range of optional accessories which adapt any of the popular models to suit your individual requirements.
> All accessories are finished in grey epoxy paint.
> Sliding door unit not suitable for 760mm high benches.
Cost : £ 71.09

BLACK SELF-INKING CUSTOM MADE RUBBER STAMP. WORDING AS BELOW > Print the text of your choice.
> Available as a standard rubber stamp for use with stamp pad (available separately) or as a convenient self-inking model with unbreakable plastic casing.
> Please indicate clearly wording required and layout. Print
Cost : £ 28.79

"RUBBER TYRED WHEEL. CAST IRON CENTRE. BORE 1 1/4"". DIA 300MM" --
Cost : £ 149.23

PACK OF 3 P3 FILTER CARTRIDGES Mask
>Wide scrath resistant polycarbonate visor.
>Soft single reflex seal and inner mask to ensure complete safety and reduce visor fogging.
>Twin exhale valve for increased wearer comfort.
>Single size with five point adjustable suspension ha
Cost : £ 18.8

2 X 2KG - 5G SET OF WEIGHTS TO WEIGH APPROX 6KG > Weights A-B to suit Ref. 134F010.
> Weights C-H to suit Ref. 135F010.
Cost : £ 45.24

Fire Extinguisher Cabinets > Robust polyethylene moulding.
> Hinged door with two clear-view panels and quick release retaining clasps.
> Body profiled for additional strength and mounting points reinforced.
Cost : £ 106.93

6 ROLLS 17MU CAST FILM STRETCHWRAP. WXL 400MM X 300M Smooth surface enables film to cling to itself without
additives.
Better memory ensures pallets stay more secure during
transport.
High clarity allows more accurate bar coding.
Core diameter: 38mm.
Cost : £ 39.95

Key Contract Stairclimber Optional extra:
> Load retaining strap with double claw ends to suit ref. 196K029A. Load retaining strap
Cost : £ 8.58

MAGNIFIER DISPLAY STAND 12 PC Carton packed.
Contents:
• 4 x 125mm long with 50mm ? lens
• 4 x 150mm long with 60mm ? lens
• 4 x 180mm long with 75mm ? lens --
Cost : £ 39.79

PK 2 S/STEEL M4 SHORT KNURLED NUTS. --
Cost : £ 4.88

Snappy replacement blades > 100mm scraper blade in handy pocket size holder. A practical and quality range of window cleaning equipment.> Ideal for the removal of paint and other heavy duty deposits from glass. SNAPPY SCRAPER / TRIUMPH AND SNAPPY SCRAPERS / WINDOW CLEANING EQUIPM
Cost : £ 4.23

BUSINESS CARD POUCH. HXW 64X95MM. PACK OF 100 >Perfect for making long lasting signs or notices.
>After lamination adhesive backing allows document to be attached wherever required.
>All pouches are supplied in packs of 100.
>Pouches are supplied with 2 carriers.
>Credit card and business
Cost : £ 5.17

25MM STEEL HINGE (PAIR) Packed in polybag with label. --
Cost : £ 0.31

SANDING BELT 40G 520X20 Cloth backed. Sold loose. --
Cost : £ 0.83

CNC Tool Handling And Storage > Freestanding unit.
> Can accept up to three tool carriers.
> Epoxy powder coated grey finish (RAL7001).
> H x W x D : 375 x 600 x 450 mm.
>One pair of carrier brackets is required for each carrier block used. Bench Stand
Cost : £ 125.2

150MM ROUND FILE-BASTARD (12) Manufactured in accordance with BS498:1990
Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 17.35

20LTR HINGED LID CONTAINER. 20LTR CAP. GREY. > Containers with integral hinged lid.
> Lid held firmly closed by 2 clips on each side.
> All containers are European standard sizes.
> Colour: grey
Cost : £ 18.21

450MM HIGH FULL TOOL PANEL - BENCH LENGTH 1800MM Range of accessories that can be added to the 456 medium duty workbenches to suit specific requirements.

N.B. Long rear support posts required when ordering top fluorescent light or shelf. Short rear support posts required when orderin
Cost : £ 128.9

110V ELECTRIC DRUM PUMP MOTOR 540W. FLOW RATE 100. > Standard electric and explosion proof and compressed air motors.
> Electric - 240v and 110v. All supplied with 5m long cable.
> 450W units - flow can be regulated by the motor's speed controller.
> Explosion proof - only stainless steel pump
Cost : £ 593.38

FOLDING TABLE BUFFET/ADULT L1830XW685XH760MM AUBURN TEAK > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 253.8

BOX OF 1000 PLASTIC BUCKLES 12MM. QTY 5+ > Available in anti-slip steel or impact resilient plastic.
Cost : £ 20.56

PACK OF 50 MAGNETIC TICKET HOLDERS. HXL 80X200MM >Magnetic or self-adhesive backing.
>Bar codes can be read through the clear plastic.
>Insert cards are included.
Cost : £ 92.24

STRAIGHT ALUMINIUM CRANK HANDLE. LENGTH 160MM. >Complete product with DIN98 aluminium rotating handle. Hub with central hole.
Cost : £ 27.61

915MM STEEL LOWER SHELF.WIDTH 1200MM. > Range of optional accessories which adapt any of the popular models to suit your individual requirements.
> All accessories are finished in grey epoxy paint.
> Sliding door unit not suitable for 760mm high benches.
Cost : £ 69.15

Orbital Sander >Ergonomic design.
>Takes standard size sheets.
>Quick change sheet clamp.
>Dust extraction facility.
>Supplied complete with an abrasive sheet.
>BS non-rewireable plug and 3m (approx.) of cable.
Cost : £ 19.39

"SIDE BRACING STRAP. BAY DEPTH 24""" > For unclad bays.
> Flat steel straps supplied individually; use in pairs.
Cost : £ 7.58

FLEXIBLE HOSE W/CREVICE NOZZLE For use wth Draper Hand-Held Vacuum Cleaner Stock No. 69349. Sold loose. --
Cost : £ 1.79

SET OF DOUBLE SPEEDER WRENCHES Special spanner that can be disengaged from a fastener without removing the spanner itself which actually speeds up usage. Chrome vanadium steel hardened and tempered with satin chrome plated finish on shaft and ring end and polished chrome plated finish
Cost : £ 19.0

M12S EYE/JAW STRAINING SCREW (8MM DIA ROPE) >Wire rope manufactured to current British Standards.
> Test certificate can be issued to show sample breaking strain.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 32.31

PACK 5 100MM FLAT/MET CUT DISC For use with Stock No.19896 Air Angle Grinder. Cold pressed resinoid bonded aluminium oxide and glassfibre reinforced. Grit grade A30-S-BF 80 medium hard. Diameter 100mm and bore 16mm. Maximum working speed 80m/sec. Packed 5 wheels per display pack.Cost : £ 4.97

FLEXIBLE HOSE 1.7MX58MM BORE 36 and 58mm DIAMETER ACCESSORIES
NOT suitable for for Stock No.59311 or 50583 --
Cost : £ 12.37

PACK OF 2 KEYPANELS. WXH 1000X457MM. BLUE > This system is based on a range of tough metal panels perforated with a regular pattern of square holes.
> A wide variety of steel tools and parts holding accessories can be located at any position on the panelwork.
> Each accessory is designed to
Cost : £ 49.23

6'' BRASS VIC. LEVER LATCH-PAI Polished and lacquered. Brass handles supplied complete with follower bar and fixings. For internal use. Carton packed. --
Cost : £ 4.43

Polypropylene Stacking Chairs - For Adults & Juniors > Transports stacked chairs.
> Accepts up to 20 chairs. Chair Trolley
Cost : £ 86.95

14.4V cordless combi drill Plus >Expert Quality
>Spindle lock for easy bit change
>Hammer drilling facility
>Variable speed control
>21 position torque control
>High torque two speed gearbox
>13mm Rohm keyless chuckk
>Electric brake
>Reversing facility
>Anti-s
Cost : £ 249.1

Engineering Wipes > Dispenser for use with engineering wipes Refs. 154 - 156 & 200S073A. Top holder
Cost : £ 17.63

PETROL COMP. FRAME 120LT 9HP Air Receiver CE Approved.
Features:
• Driven by Honda 9HP petrol engine
• Oil alarm equipped
• Air cooled 4 stroke engine
• High output
• Robust construction
• Belt drive
• Twin outlet regulator/f
Cost : £ 2655.38

PLASTIC BOX C/W 440 ASST. PHILLIPS PAN HEAD SCREWS. 10+ > Galvanised Steel
>Contents: 78(2.9x13) /64(3.5x13) 40(3.5x16) / 36(3.5x19) /22(3.5x25) 36(4.2x13) /36(4.2x16) / 34(4.2x19) 26(4.2x25) / 26(4.8x16) / 24(4.8x19) 18(4.8x25) / 12(4.8x32) 26(5.5x25) 8(5.5x32) 10(6.3x25) 4(6.3x38).
Cost : £ 31.73

AXLE SETS --
Cost : £ 44.65

32 TPI BODYSAW BLD CARD Spare blades for Stock No. 59953 Air Body Saw. Display packed 3 blades per display card. --
Cost : £ 7.37

GAS CYLINDER CONVERSION KIT Allows the use of large cylinders with smaller MIG welding machines. Comprises small pipe adaptor with 750mm of 6mm I/D clear reinforced hose and ‘O‘ clip fitting. Packed in polybag. --
Cost : £ 6.93

75MM DRILL PRESS VICE Manufactured from cast iron with fully hardened jaws. Chrome plated handle and lead screw. Display carton. --
Cost : £ 9.94

3.2MM BACK.WASHER(100PER CARD) For use with rivets listed under “Blind Rivets“. Used on back of blind rivets for extra fixing security. Average contents 100 washers per card. Display packed. --
Cost : £ 1.39

TYRE VALVE REPAIR TOOL Cleans internal and external valve stem threads and removes valve cores. Display packed. --
Cost : £ 1.9

PROFILE SHELF PANEL -PANEL WTH 885MM - FRAME DEPTH 900MM >Pre-Galvanised steel panels to form solid shelf between beams.
Cost : £ 23.91

METRIC DEEP OFFSET RING SPANNER 30X32MM X 364MM LGTH >Manufactured to DIN 838 specification.
>Ring end cranked at 15 degrees.
>Ring ends have 12 corners with special radius design giving added torque.
Cost : £ 15.86

"2 TIER EDUCATION LOCKER HXWXD 70X12X15"".TWO TONE BROWN/BEIGE" School Lockers - available in 2 or 3 tier.
> Each compartment is supplied with an adjustable removable shelf.
> O/A HxWxD: 1778x305x381 mm.

Student Lockers - available in 4 tier.
> Capable of accommodating large school bags.
> O/A HxWx
Cost : £ 133.95

EXTRA SHELF LEVEL. 1200X600MM GREY > Extra shelf levels for medium duty PDQ shelving.
Cost : £ 25.79

SEMI-OPEN FRONTED CONTAINER. LXWXH 368X268X167MM. CAP 20L > Very high stability due to rounded hollow corner profiles.
> Ergonomically designed open handgrips.
> Open half side.
> Large areas for logo printing and label holders on all four sides.
> Each container is supplied with a label.
Cost : £ 8.58

Low Cost Tray Trolleys Total stop brake on 2 swivel castors- extra cost
Cost : £ 14.69

25LTR WHITE SWING TOP BIN > For all areas.
> Highly resistant polypropylene trash cans.
> The flip lid keeps hands free.
> Large opening gives easy access.
> Flat back panel allows placement against walls.
> Can be used with or without trash bags.
> Equipped with
Cost : £ 11.99

DOUBLE DOOR TOOL LOCKER. HXWXD 915X915X457MM - GREY/BLUE Double Door Tool Locker
>Epoxy polyester powder coated paint finish.
>Flush top with 2 adjustable shelves.
>3 point Espagnolette locking system with 2 keys supplied.
>O/A HxWxD: 915x457x457
Cost : £ 168.5

LOCKING COLLAR TUBE CLAMP. TYPE 'A' For use with galvanised steel tube.
Match tube clamp type with tube type for an exact fit.
Fitted with hexagonal screws.
Hexagonal keys and ratchet spanner available on request.

N.B. MINIMUM ORDER VALUE AND SPECIAL DELIVERY CHARGES MAY APP
Cost : £ 3.58

Post Mounted Signs >All signs comply with BS 5499-1 and The Health and Safety (Safety Signs and Signals) regulations 1996. For area where there is no wall on which to mount a sign.
Cost : £ 45.24

DK.GRY/GRY BRUSH INSERT FRONT- RUNNER BRUSH. LXW 1500X1000MM > High density brushes.
> One piece modular design.
> Colour: dark grey with grey brush insert.
Cost : £ 379.17

PACKHAM BENCH - 2400MM LONG PEDESTAL FIXING > Timber slats 110x95mm.
> Front and rear timbers are each splayed towards central slat to create slightly dished seating surface for extra comfort.
> Black plastic coated frames.
> Timber colour: light mahogany. Other shades available upon req
Cost : £ 480.58

"PACK OF 50 NUTS & BOLTS 5/8""L" >Zinc passivated and lacquered
Cost : £ 10.99

GLAZED FRONTED LETTERBOARD - HXW 1228X925MM - BLUE > Grooved felt covered board with gold colour trim for attractive appearance.
> Changeable letters simply push inand pull out.
> Covered in quality felt for long lasting good looks.
> Attractive curved and mitred in gold finish.
> Supplied wit
Cost : £ 650.95

PACK OF 100 STRAUGHT HYDRAULIC GREASE NIPPLES 8 X 125 --
Cost : £ 16.45

100MM DISCS 60GR (10 PER PACK) Fibre backed. 16mm bore. Display packed 10 discs per pack. --
Cost : £ 4.27

FOLDING TABLE JUNIOR/PRIMARY L1220XW760XH635MM AUBURN TEAK > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 209.15

NOZZLE - FOR HOT AIR BLOWER. Kit Comprises:
> Shrink sealer ? cuts and seals shrinkfilm up to 400mm wide.
> Unrolling device ? special unit designed to facilitate the unrolling and opening
of centre fold shrinkfilm up to 450mm wide.
> Separator bar
> Hot air blower and
Cost : £ 6.93

2 spare lamps for Mini Maglite AA Accessories / MAGLITE TORCHES
Cost : £ 5.05

S.STEEL GLASTRONORM CONTAINER. TYPE 1/3 - DEPTH 100MM > Manufactured to a high standard using 0.8mm 304 stainless steel.
> No distortion on heating any size.
> No jamming during storage.
> Suitable for any application.
> Perforated containers are used in their own right as containers in a steam
Cost : £ 15.86

SELF ADHESIVE CORRUGATED PAPER ROLL WXL 360MM X 100M > 100% recyclable.
> Absorbs impact and secures
contents during transit.
> No need for tape or staples.
> Supplied in packs of 200.
Cost : £ 52.29

MDF TOP WXD 1500X750MM - > Range of replacement worksurfaces.
> In many situations a workbench frame remains usable whilst the worksurface has deteriorated and needs replacing or upgrading.
> 18mm MDF with wooden edge sealed with clear polyurethane varnish.
Cost : £ 165.68

165MM HAT & COAT HOOK Polished and lacquered brass with special decorative ends. Size 165mm. Supplied complete with fixings. Display packed. --
Cost : £ 2.23

125MM UNIVERSAL DIAMOND BLADE --
Cost : £ 17.17

Swivel + brake K90 SERIES EXPANDING PLUG FITTING
Cost : £ 16.45

P Handled Sack Truck > Capacity 200kg.
> Constructed from tubular steel. Fully welded and fitted with 260mm pneumatic tyres.
> O/A HxWxD: 1300x570x510mm.
> Toe plate WxD: 370x230mm.
> Weight: 12kg.
Cost : £ 45.83

AIR BELT SANDER Compact belt sander for shaping and finishing work. Ideal for awkward angles/shapes on car bodywork. Can be converted to die grinder when sanding head is removed and replaced by collet head chuck. Supplied complete with two sanding/grinding belts. Display
Cost : £ 177.03

FOLDING TABLE INFANT/PRE-SCHL L1220XW610XH546MM AUBURN TEAK > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 200.93

MEDIUM RIB MATTING 10M ROLL WIDTH X THICKNESS 1220X5MM > Available in rolls and cut lengths.
> Thickness: 3 or 5mm.
> Colour: black.
Cost : £ 176.25

MINI FLAT BED CONVEYOR. BELT LENGTH 1000MM. BELT WDTH 300MM > Low profile formed mild steel slider bed.
> Endless belt - smooth surface PVC. Hot vulcanised join.
> Support legs - height adjustable between 700-1000mm to top of belt. Foot plate Floor pre-drilled to take 10mm bolts (not supplied).
> Belt s
Cost : £ 1504.0

OCTO RANGE ADJ. WORKBENCH. BIRCH VENEER. 2000X750MM -BLUE >Working height adjustable between 700-950mm.
>System allows for easy adjustment to the desired height.
>Large 40mm thick work surface in a choice of finish.
>Epoxy paint finish.
>Colours: blue/silver or graphite/silver.
>Supplied flat pack
Cost : £ 352.5

420W ROTARY DRILL - 240V. VARIABLE SPEED= 0-1700 RPM. >Keyless chuck.
>420W: single speed.
350W: two speed variable speed.
>240V or 110V
Cost : £ 104.81

Luggage Truck > Tubular steel construction with folding toe and rubber tyred wheels.
> Supplied with elastic load retaining strap.
> O/A HxW: 990x300mm.
> Folded height: 630mm.
> Toe WxD: 190x250mm.
> 125mm diameter solid rubber tyres.
> Weight: 2kg.
Cost : £ 24.09

CUT/WHEEL-METAL.125X2.5X22.2MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade A30-S-BF 80 medium hard. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 0.93

BROWN REDWOOD HIKER BOOT. SIZE 8 > Manufactured to EN345.
> Leather upper.
> Goodyear welted rubber nitrile sole.
> Heat resistant to 300 degree C.
> Resistant to oil and solvents.
> 200 joules steel toe cap.
Cost : £ 40.54

WORKBENCH WITH LOWER SHELF. ANTI-STATIC SURFACE. 1200X900 > Black anti-static Fibreboard bounded to 18mm MDF with wooded edge.
> Complete with earth connection cable.
> Conductivity between 104 and 106ohms/cm2.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
Cost : £ 530.57

PK OF 10 LONGITUDINAL DIVIDERS FOR DRAWERS 278 & 279T022N Accessories: transverse and longitudinal dividers
Cost : £ 4.7

Interchangeable Accessories - optional extras > Jib - Maximum load capacity 500kg; fitted with swivel safety hook. Interchangeable Accessories
Designed to accept a range of interchangeable accessories and provide a practical and economical way to solve a variety of regular lifting and moving op
Cost : £ 115.8

TYPE A - BASKET DIVIDER. > Constructed from welded steel wire.
> Full depth wire dividers.
> Finish: Bright zinc.
Cost : £ 5.35

INDESIGN MAGNETIC FOUR MONTH PLANNER - HXW 840X594MM > Magnetic surface which may be used with dry wipe markers.
> Also accepts water-based pens for occasional changed entries.
> Magnets may be used to mark events.
> Indesign trim co-ordinates with other products in range.
> Attractive and durab
Cost : £ 129.25

STAINLESS STEEL TRAY CLEARING TROLLEY. HXWXD 1490X1012X426MM > Manufactured from 25mm round tube.
> Fitted with 100mm diameter castors.
> Accept trays: 457x346mm.
> Special size trolleys can be made to suit any tray size. Contact our customer call centre for further details.
> Available in a choice of f
Cost : £ 579.28

LIGHT DUTY KEYBENCH.LAMINATE. WXD 1200X750MM. Workbenches
> Ideal packing bench or for light assembly work.
> Solidly constructed from 16 and 14 swg sheet and square tube sections.
> Adjustable plastic insert feet.
> Full range of cupboard and drawer accessories.
> Standard height: 840
Cost : £ 272.84

WARDROBE RACK WITH 7 HOOKS LENGTH 1050MM > Extruded aluminium.
> Colour: satin anodised.
Cost : £ 46.3

SCREWDRIVER & BIT SET TX-STAR “Draper TX-STAR“ insert bits are compatible with †Torx fixing systems
Chrome plated blade with powerful 1/4“ magnetic bit holder. The plastic handle can store the six 1/4“ 25mm long bits supplied which are manufactured from chr
Cost : £ 6.84

T30X115TX-TAMPERPROOF S/D-PKD “Draper TX-STAR“ driver heads are compatible with †Torx fixing systems.
Satin chrome plated chrome vanadium steel blades hardened and tempered with shot blasted tip. Square matt black handles manufactured from high impact resistant plast
Cost : £ 3.08

EXTENDING CRANE JIB. TRUCK CAP 2000KG. FORK SPREAD 496MM > Instant drive-in fitting by one man.
> Positive fixing behind fork heels. Fitt
Cost : £ 975.25

Quartz Time Recorders > Fully automatic 4 in/out locations with manual override.
> Fully automatic printing - time/date/month in single colour (decimal print options).
> Automatic GMT hour adjustment with perpetual date change.
> Lateness symbol (denotes lateness or o
Cost : £ 513.24

R.H ICTUS COMPACT WORKSTATION + PEDESTAL. LT.GRY/ANTHRACITE > 25mm thick tops with scratch resistant melamine finish and shock absorbing ABS edge. Available in light grey or beech.
> 25mm thick side and front panels are made of melamine in anthracite or beech.
> Desk height 720mm.
> Each desk has two cab
Cost : £ 431.7

K95 SERIES PLATE FIXING --
Cost : £ 19.98

PISTON RING COMP 75-140MM Spring steel with steel adjusting key. Display packed. --
Cost : £ 10.4

100 BRASS TRA.S/SCREW 1.1/2X6 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws. --
Cost : £ 4.54

FORK EXTENSION. FORK WIDTH 125MM. EFFECTIVE LTH. 2440MM > Profiled and chamfered steel sections.
> Held firmly in place by intregral
retaining bar.
> For counter balance fork lift trucks.
> CE marked - test certificate supplied.
N.B. Sold in pairs.
Cost : £ 347.8

10MM HD STAPLES-(BOX OF 1000) Boxes of heavy duty staples for use with the following Draper Staplers/Tackers:
• Heavy Duty Staple Gun/Tacker Stock No.13951
• Hammer Tacker Stock No. 67984
• Electric Stapler/Nailer Stock No. 69358
Staple thickness 2mm (approx
Cost : £ 1.54

PACK 2 50MM PROVENCE KNOBS C/W M8 THREADED SHANK. Can also be used in through hole version as the closure cap can be removed. Excellent impact resistance thanks to its polyamide composition reinforced with 30% glass fibre.
Cost : £ 3.94

SET OF 4 SKATES. LOAD 20 TONNE > Skates - cast spheroidal graphite bodies and case hardened steel chain. Use as single or multiple units.

Accessories:
> Turntables - locate on top of skate. Use to control direction of load.
> Height Equalizers - use in conjunction with tur
Cost : £ 249.1

CABLE HOIST. MAXIMUM CAPACITY 250KG > Can be used with a single or double lift using the unique three hook design.
> Interlocking pawl system for positive control.
> Supplied with wire rope and safety hooks.
> Test Certificate supplied.
N.B. For models with a single and double l
Cost : £ 184.48

WHITE COFFEE BUTLER AND CORDLESS JUG KETTLE SET 1.7ltr Cordless Jug Kettle
> Hinged lid.
> Automatic switch-off with boil dry cut-out for double protection.
> Spout fill.
> Water level gauge.
> Cool touch handle.

2ltr Coffee Butler
> Insulated to keep drinks either cool or hot.
Cost : £ 38.07

Minders > Light and robust will last for years.
> Stack flat for easy storage and carrying.
> Manufactured from high impact polyethylene.

6 self-adhesive signs included with each minder:
> Caution - wet floor
> Temporarily closed
> Caution -
Cost : £ 39.36

PACK OF 4 INSERT BOXES Insert boxes are used to divide the largest drawer (size 3).
A choice of four insert boxes for size 3 drawers. Supplied in packs containing one size - each pack will
completely fill a drawer.
0
Cost : £ 8.52

METRIC COMBINATION SPANNER 17MM X 225MM LENGTH >Ring end cranked at 15 degrees
Ring ends have 12 corners with special radius design giving added torque.
>Open end ste at 15 degrees.
>Manufactured to DIN 3113 specification.
Cost : £ 4.94

Bench Top Mounted Accessories Includes 30 tilt bins. Tilt bin panel
Cost : £ 114.45

BLUE CHAIR. >Steel frame with polypropylene seat and back.
>Horizontal interlocking design allows safe stacking.
>O/A HxWxD: 749x457x482mm.
>Folded HxWxD: 991x457x64mm.
>Seat height: 451mm.
Cost : £ 21.09

PACK 100 A4 COMBS 6MM DIA. WHITE > Combs are supplied in packs of 100.
Cost : £ 7.05

REDUCING BUSH 30MM OD X20MM ID For use with Circular Saw Blades. Sold loose. --
Cost : £ 0.78

'Taktyle' Braille Signs >Manufactured and moulded matt finish plastic to prevent reflection.
>Patented locating ring - guides the hand to the centre where the information can be easily found.
>Smooth contour lettering and pictograms.
>Self adhesive backing for instant f
Cost : £ 25.85

SLIDING GLASS BOARDS A2 - HXW 631X465MM - GREEN FELT >Smart bright polished silver aluminium frame.
>Contrasting felt background.
>Top of frame and glass front simply lifts to change notice or picture.
>Discreet operation helps to prevent tampering.
>Ideal for displaying duty rosters as easy to
Cost : £ 82.84

BOTT CABINET 8 DRAWERS O/A HXWXD 1005X750X750MM. BLUE > Freestanding units for location in the workshop and stores.
> All units 750mm wide x 750mm deep.
> Drawer capacity: 100kg UDL.
> Internal drawer dimensions: 660x660mm.

Ref. 215B074N
> 8 drawer unit popular cabinet especially useful f
Cost : £ 986.47

Small European Standard Accessories Containers > 400x300mm containers will stack neatly onto a 600x400mm dolly.
> Containers Refs 215 and 216S080N manufactured from polypropylene.
Please specify colour. Grey will be supplied as standard. Ventilated Sides/Solid Base
Cost : £ 12.34

STACKING WORK PAN - HXWXD 150X455X455MM >Choice of stacking or nesting pans.
>Spot welded galvanised steeel.
>REINFORCED RIM.
>half-lift handles.
>Capacity: 25kg
Cost : £ 13.1

PK OF 2 YELLOW LONG KNOBS 35MM DIA M10 THREAD INSERT QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 14.69

PACK OF 12 ROLLS CLEAR POLYPROPYLENE TAPE. WDTH 75MM > Excellent adhesion properties.
> Impact resistant.
> Waterproof.
> Especially useful in cold conditions - will not dry out or crack.
> Roll length: 66 metres.
> Colour: brown or clear.
> N.B. Packs of one colour only.
Cost : £ 18.21

PK 2 S/STEEL M10 SHORT KNURLED NUTS. QTY 6+ PACKS --
Cost : £ 13.51

PACK OF 10 SINGLE PRONG TOOL HOLDERS. LXDIA 50X6MM > Zinc plated
> Can be located at any position where holes appear.
> Securely located by a plastic clip.
> Quickly and easily repositioned when necessary.
Cost : £ 6.99

POLYURETHANE TYRE ALUMINIUM CENTRED WHEEL. DIA 125MM. BALL --
Cost : £ 40.54

Wallcharts and Pocket Guides >Printed on 0.7mm thick PVC
> Will withstand constant handling and resist dirt and grease.
> Wall charts - display at relevant locations in the workplace for maximum awareness.
> Pocket guides - can be an instant source/reminder of information.
Cost : £ 4.0

Glass Signs >The range of signs below will help reduce the risk of accidents by highlighting the presence of plate glass throughout your premises.
>The glass aware range is cut from frosted vinyl which gives the effect of the design being etched into the glass pla
Cost : £ 31.73

PK 10 STEEL M10 SHORT KNURLED NUTS. --
Cost : £ 17.04

HANDIFILE EXPANDING ORGANISER WXHXD 380X245X120MM. BLUE > Practical briefcase format.
> Neat and compact for travel or storage.
> Fans out into a 19 section file.
> WxHxD: 380x245x120mm.
Cost : £ 12.34

AIR OPERATED PUMP C/W EPDM SEALS > Manufactured from polypropylene with acetal piston. Seals as indicated below.
> Air regulator valve controls flow rate. Trickle feed tap allows for positive dispensing.
> Fitted with air pressure regulator for safe working. Max./min. air pressure
Cost : £ 173.9

360L YLW POLYETHYLENE STORAGE CONTAINER. 695X695X1165MM > Rotationally moulded in food grade polyethylene.
> Smooth snag free interiors.
> Inert to a wide range of chemicals.
> Temperature range -20 degree C to +60 degree C.
> Static Containers - fitted with 2 zinc plated metal handles.
> Mobile
Cost : £ 177.43

Maintenance Signs >1mm thick rigid PVC material.
>Supplied with 2 pre-drilled holes for easy fixings. Comply with the relevant UK and EC legislation.
Cost : £ 8.11

Transporter Trolleys > ABS clipboard for use with Transport Trolleys Refs. 100/101T047N. ABS Clip Board
Cost : £ 12.63

COLD CHISEL&GUARD 25X300MMBULK Octagonal shank chisel manufactured from selected steel with polished cutting edge. Fitted with impact absorbing hand protection grip. Sold loose. --
Cost : £ 7.84

DOUBLE PEDESTAL DESK 6 SHALLOW DRAWERS 720X1600X800MM GRY ASH > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 264.38

THREE PART LADDER SYSTEM. 3X9 RUNGS. > Conforms to EN 131 (BS 2037
Class 2).
> Adjustable stabilizer with levelling up to 150mm for safe standing on uneven surfaces.
> High strength aluminium alloy box section stiles.
> High tensile steel hooks and hook locks.
> Non-slip stile
Cost : £ 252.63

VDU DESK 720X1800X800MM. GREY ASH. > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 164.5

BOX OF 1000 PLASTIC BUCKLES. 9MM. - QTY 1-4 > Available in anti-slip steel or impact resilient plastic.
Cost : £ 18.8

4-WAY CONNECTORS FLAT FOR GREY SQUARE TUBE - PACK OF 4 > Impact resistant ABS with a steel core. These provide maximum rigidity and load bearing strength.
Cost : £ 31.43

ALUMINIUM SAFETY SIGN. 230X172 'FIRE ACTION' >0.9mm thick coated aluminium with radius corners.
>Pre-drilled fixing holes.
Cost : £ 13.51

Bottom Shelves SYSTEM 600 WORKBENCHES - continued
Cost : £ 113.8

PCK OF 6 STANDARD DUTY SHELVES SHELF DEPTH 400MM Width: 1000mm.
> Pierced to accept dividers.
> Colour: light grey.
> Supplied in packs of 6.
> All additional shelves c/w shelf clips.
Cost : £ 87.42

37 ASSORTED TOOLHOLDERS. --
Cost : £ 54.23

PK 2 S/STEEL M12 SHORT KNURLED NUTS. --
Cost : £ 18.8

Battery Charger > Plug-in charger.
> Complete with 4 off 1300mAH AA Ni-MH batteries.
> Full charge in 3-5 hours.
> Automatic shut-off.
> Timer controlled. 1300mAH AA Ni-MH Battery CHarger New
Cost : £ 17.86

Dog Waste Bin > Needed when assembling a Ground Anchor for Dog Waste Bin. An effective system of disposing of unsightly dog waste. Ground Anchor Tool Kit
Cost : £ 122.2

INT. VEHICLE FLEXIDOOR HXW 4400X1000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 206.8

FOLDING TABLE INFANT/PRE-SCHL L1220XW610XH546MM AILSA GREY > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 200.93

POLYURETHANE TYRE ALUMINIUM CENTRED WHEEL. DIA 200MM. BALL --
Cost : £ 52.88

Prohibition > Available in self-adhesive vinyl or 1mm thick PVC. Designed to comply with the relevant UK and EC regulations Petroleum spirit. Highly flammable. No smoking
Cost : £ 32.31

350L YLW POLYETHYLENE STORAGE CONTAINER. 920X860X780MM > Rotationally moulded in food grade polyethylene.
> Smooth snag free interiors.
> Inert to a wide range of chemicals.
> Temperature range -20 degree C to +60 degree C.
> Static Containers - fitted with 2 zinc plated metal handles.
> Mobile
Cost : £ 162.15

'V' GROOVED CAST IRON WHEELS. ROLLER BEARING. DIA 125MM --
Cost : £ 38.19

BLACK BISLEY 5 DRAWER CABINET 300X280X410MM > Welded steel body and drawers.
> Chromium-plated handgrips and cardholders.
> Optional insert trays for optimal versatility.
> Drawers - WxD: 235x380mm.
Cost : £ 95.53

WALL BRACKET FOR WORK LIGHT > Industrial strength construction.
> Low voltage halogen lights.
> Available in 12v or 24v.
> High 50W output.

Arm
> Brass & steel construction with PVC covering.
> 700mm length.
> Flex-tube guaranteed for life.
> Bends easily
Cost : £ 16.45

GRIND/DISC-MET. 230X6.0X22.2MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade A24-R-BF 80. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 2.8

PACK OF 2 KEY PANELS. WXH 500X457MM. RED > This system is based on a range of tough metal panels perforated with a regular pattern of square holes.
> A wide variety of steel tools and parts holding accessories can be located at any position on the panelwork.
> Each accessory is designed to
Cost : £ 26.79

KERSTAR UPRIGHT VACUUM CLEANER CLEANING WIDTH 450MM. > Four positions suitable for use on any type of carpet.
> 750W motor with thermal protection switch. TV and radio suppressed.
> 150W brush unit drive motor with toothed belt drive. Bristle strip easily replaced without removing roller brush and bel
Cost : £ 588.68

INSERT BRUSH 36 and 58mm DIAMETER ACCESSORIES
NOT suitable for for Stock No.59311 or 50583 --
Cost : £ 4.61

INDUSTRIAL COUNTING SCALES 15KG CAP. 0.5G GRADUATION > 3 backlit LCD displays with 20mm digits.
> Easy to use keypad.
> Memory accumulation of count.
> Programmable for counting to pre-set number of parts.
> Internal rechargeable battery with up to 70 hours of operation.
> Tare function.
>
Cost : £ 266.73

PAIR OF REPLACEMENT JAW PADS >Strong lightweight resin construction.
>Unique quick release locking base system for maximum portability.
>Extra bases avaialable.
>Pegs to facilitate the mounting of bases on to workmate style bencjes with 20mm diameter holes are available as
Cost : £ 5.58

NON-SPATTER SCREEN (3 PER CARD CE and BS approved
Injection moulded polypropylene flip action welding helmet. Lens are display packed and sold separately from helmets.
Stock No. 35266 contains 2 lens per pack
Stock Nos. 35267 & 35268 contain 3 lens per pack --
Cost : £ 3.18

BEAMS - 1350MM CLEAR SPAN. --
Cost : £ 28.2

200 GOLDSCREWS C/SUNK 3.0X25 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Deep cut 40° lubricated angle threads for fast driving especially in chipboard and MDF. Case and through hardened to prevent snapping. 25° point requires no pre-drilling. Yel
Cost : £ 0.76

DUST MASK & 2 REFILL PADS This aluminium mask can be contoured to fit comfortably around the mouth and nose. Suitable only to reduce discomfort caused by exposure to coarse non-toxic particles where the concentration of the particles does not exceed the maximum permissible exposur
Cost : £ 1.47

GALVANISED ROLLER BUCKET > Integral foot lever operated plastic rollers which effectively wring out any size Kentucky mop.
> Capacity: 10 litres.
> Weight: 4kg. Excellent Value - Ex-Stock!
Low cost unit ideal for mopping smaller areas. --
Cost : £ 44.06

HOT WATER INDUSTRIAL PRESURE WASHER.LXWXH 1030X600X730MM Ref.165K004N
> Max. water flow rate: 530ltr/hr
> Max. water supply temperature 80c
> Max. pump working pressure 120 bar (1800psi)
> Complete with 10m mains cable and plug.

Ref.166K004N
> Max. water flow rate: 530ltr/hr
> Max. wate
Cost : £ 2405.23

Air Operated Transfer Pumps - trigger operated Standard pump specification
> Manufactured from polypropylene with acetal piston. Seals as indicated below.
> Air regulator valve controls flow rate. Trickle feed tap allows for positive dispensing.
> Fitted with air pressure regulator for safe w
Cost : £ 306.68

LOW COST SHRINKWRAP SYSTEM - COMPLETE KIT Kit Comprises:
> Shrink sealer ? cuts and seals shrinkfilm up to 400mm wide.
> Unrolling device ? special unit designed to facilitate the unrolling and opening
of centre fold shrinkfilm up to 450mm wide.
> Separator bar
> Hot air blower and
Cost : £ 330.18

FOLDING TABLE INFANT/PRE-SCHL L915XW760XH546MM GREY LINEN > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 182.13

T55 TX-STAR IMPACT BIT 8mm hexagon shank bits suitable for use with Stock Nos. 81519 and 22322 Impact Screwdriver Sets. Sold loose.
PZ TYPE bits are compatible with *Pozi/Supadriv fixing systems.
“Draper TX-STAR“ bits are compatible with †Torx fixing syste
Cost : £ 0.99

200 BRASS TRAD.S/SCREW 3/4X8 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws. --
Cost : £ 5.25

EXTRA FOR SHORTENING CLUTCH 13MM DIA 2 LEG > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 107.81

K165 -PK 8 THREADED SOCKETS TO SUIT 25X25X1.5MM. M10 THREAD > Adjustable feet - with fixed or tilting stems.
> Threaded sockets - for fixing feet into tube.
> Blank sockets - to neaten tube ends.
Cost : £ 1.76

300MM FLAT FILE-SECOND (6) Manufactured in accordance with BS498:1990
Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 21.07

DISPENSING CABINET > Supplied with 2 x 25 litre tinplate drums.
> Removable 15 litre reservoir tray.
> Split doors allow top half of cabinet to be locked (lock and 2 keys supplied) once drums in place. -- PETROLEUM STORAGE/ DISPENSING
Cost : £ 575.22

HEAVY DUTY KEY OPERATED POST. H X DIA 762 X 89MM.KEYED ALIKE > Mild steel post and base with powder coated finish.
> Pre-drilled base accepts 4xM12 Anchor bolts.
> Locks can be supplied keyed alike or to differ. Please specify. Keyed alike will be supplied if not specified.
> Height x dia: 762x89mm.
> G
Cost : £ 132.78

18V 1 HR CHARGER 230V To charge the batteries used in the 14.4V and 18V Draper Cordless Drills. 230V AC Charging time 1 hour (approx.). Display packed. --
Cost : £ 37.95

1/2 X 5/8 LARGE D SHACKLE SWL 15 CWT-SCREW PIN --
Cost : £ 7.76

GLASS FIBRE MEASURING TAPE. LENGTH 20M > For any level of competition.
> Supplied in enclosed cases except for 50m and 100m tapes that are open winders.
Cost : £ 15.45

WORKSHOP CABINETS. LAMINATE WORKSURFACE. WIDTH 2000MM >3 x 500mm wide wall units
>Broom cupboard.
>Tilt bin and tool panel with 10 assorted tool hooks.
>1500 x 520mm worksurface.
>Single door 500mm wide base unit.
>2 drawer 1000mm wide base unit.
Cost : £ 1642.0

ROLL PINK ANTI-STATIC BUBBLE WXL 1500MM X 100M . 1-4PKS > Sutiable for use with electrical products.
> The perfect protection for circuit boards and where electrical components may need to be laid bear.
> Flexible.
> Offers greater protection.
> Bubble size 10mm.
Cost : £ 32.31

Replacement permanent filter BOSCH VACUUM CLEANER/DUST EXTRACTOR
Cost : £ 27.08

LOW HEIGHT CYLINDERS 20.0 TON CAP. 92MM DIA. > Maximum load achieved at 700bar.
> Hand pump fitted with 1.8m long hose.
> Test certificate and operating instructions supplied.
Cost : £ 336.05

125MM TURBO RIM DIAMOND BLADE --
Cost : £ 20.26

EXTRA LEVEL TO SUIT REF 146R022N - BROWN Extra shelf level for Refs:146-151R022N
Cost : £ 15.28

BOX OF 100 DISPOSABLE LATEX NON-POWDERED GLOVES.SIZE 9-10 > For short term precision work requiring finger touch and accurate grip.
> Supplied in pack of 100.
Cost : £ 11.05

INT. VEHICLE FLEXIDOOR HXW 3200X4000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 616.88

WALLBANDS. HEIGHT 316MM PAIRS- WHITE > Shelf brackets simply slot into wallbands to give easily adjustable shelves.
> Fixing kits: wallbar kit; 10 screws and wallplugs. Shelf kit; screws for five brackets.
> Bracket load capacities are evenly distributed loads (not point loads).
Cost : £ 9.05

DRY/WET PICK UP VAC. CAP. DRY 45 LITRES. 2 MOTOR.- 240 VOLTS > Canister style cleaner manufactured from a non-rusting 304 grade mirror finish stainless steel or resilient moulded plastic.
> Ref. 236K011N has pivoting handle to allow tip action emptying of cannister.
> All vacuums supplied with 10m cable (fitt
Cost : £ 583.39

HAND GRIP WITH AIR CONTROL 36 and 58mm DIAMETER ACCESSORIES
NOT suitable for for Stock No.59311 or 50583 --
Cost : £ 5.18

TROLLEY BASE. Accessories
Cost : £ 115.15

TRIMMING KNIFE BLADES 100 H/D Reversible polished steel blades with accurately ground cutting edges. --
Cost : £ 9.24

NO.6 CERAMIC SHROUD FOR W623/4 For use with Draper Inverter/Welder TIG Torches Stock No.57096 and 57097. Packed in polybags.
* 1.6mm dia. x 150mm long --
Cost : £ 2.08

FOLDING TABLE BUFFET/ADULT L1520XW685XH760MM GREY LINEN > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 227.95

GREEN TISSUE PAPER SHEET SIZE 500X750MM. QTY 5+ PACKS. > Paper grade: 18gsm.
> Supplied in packs of 480 sheets.
> Available in 4 colours.
Cost : £ 14.1

50LTR RHINO FIRE RESIST LITTER BIN GREEN. 744X444X325MM. > Manufactured from UV stabilised glass reinforced polyester.
> Self-locating body closes with slam shut action and locks automatically on mounting bracket.
> External handle prevents contact between operator and bin contents.
> Withstands extrem
Cost : £ 164.5

STACKING TRAY - O/A WXL 457 X 762MM. PERFORATED SIDES & BASE > Available in three heights.
> All trays interstack with each other.
> O/A LxW: External - 762x457mm.
Internal - 715x412mm.
> Secure cross stacking of trays and lids improves air circulation thereby accelerating product cooling.
> Slide s
Cost : £ 11.16

60 DRAWER CABINET. HXW 940X920 DRAWER DEPTH 390MM - GREY/GRN >Manufactured form 1 and 1.2mm steel sheet.
>Seam and spot welded.
>Each drawer supplied with self-adhesive label holder.
>Overall Cabinet depth
drawer depth 190mm = cabinet depth 270mmm.
drawer depth 290mm = cabinet depth 370mmm.
drawer
Cost : £ 673.92

K20 SERIES PLATE FIXING --
Cost : £ 84.01

200 BRASS RA/HD S/SCREW 5/8X6 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws --
Cost : £ 3.62

8MM STAPLES-(BOX OF 1000) Boxes of general duty staples for use with the following Draper Staplers/Tackers:
• Staple Gun/Tacker Stock No. 13952
• Lightweight Staple Gun/Tacker Stock No. 56027
• Hammer Tacker Stock No. 67984
Staple thickness 1mm (approx.)
Cost : £ 1.18

Parking Brake - factory fitted optional extra > For all trucks featured on this page.
Cost : £ 117.5

4-DRAWER FILING CABINET - GREY ASH > Constructed from 18mm
counter-balanced foil board.
> Supplied flat packed for easy
self-assembly.
> Able to take foolscap files.
> Built-in anti-tilt device for safety.
> 30kg loading per drawer.
Cost : £ 231.48

SPARE BULB 1000W HALOGEN Manufactured to IP54 Standard
Diecast aluminium body with black epoxy coating and adjustable wall mounting bracket. For external use only. Supply 230V AC Supplied complete with halogen bulb. Display carton. --
Cost : £ 7.21

BLACK DURASTEP ANTI-FATIGUE MATTING. LXW 18.3M X 900MM >Features a high density PVC foam top surface that offers greater durability.
>Low-density bottom surface offers excellent fatigue relief properties.
>Durastep stimulates blood circulation and reduces stress in the lower back and leg muscles.
>Av
Cost : £ 938.83

6 POSITION DESK CLUSTER. MID RED WITH WHITE BEECH FINISH >Innovative desk design leads to great floor space efficiency.
>Dividing shaped top screens provides privacy without isolation.
>Well planned environments encourage higher productivity and efficiency.
>FOC site survey and design survey available
Cost : £ 1731.95

8 COMPARTMENT CUPBOARD. HXWXD 1829X915X457MM. COFFEE/CREAM > Versatile units for storage of items varying in size.
> Manufactured to withstand wear and tear of industrial use.
> Strong steel construction with welded door frame for extra rigidity.
> Doors fitted with full height recessed hadle with magnet
Cost : £ 287.93

350L RED POLYETHYLENE STORAGE CONTAINER. 920X860X780MM > Rotationally moulded in food grade polyethylene.
> Smooth snag free interiors.
> Inert to a wide range of chemicals.
> Temperature range -20 degree C to +60 degree C.
> Static Containers - fitted with 2 zinc plated metal handles.
> Mobile
Cost : £ 162.15

FIXINGS WITH TWO THREADED RODS DEFL. 7 MM. QTY: 5+ --
Cost : £ 15.28

FLUORESCENT TUBE C/W TOP FRAME FOR 1800MM BENCH Range of optional accessories.
Cost : £ 153.4

SCHOOLS/CLUB TRAINING BIBS - LARGE BLUE - PACK 10 > Manufactured from nylon.
> Elasticated/ velcro fastening sides.
Cost : £ 51.47

PK 20 TRIPAC POSTAL TUBES. LXDIA 430X80MM > RECYCLABLE.
> Saves on storage space both before and after use. Comes flat packed.
> Seconds to assemble.
> Re-sealable locking tab system.
> Self adhesive strip along the length provides security.
> Supplied in packs of 20.
Cost : £ 31.14

RUBBER TYRED WHEEL WITH STEEL CENTRE DIA 250MM --
Cost : £ 22.33

150MM HAND FILE-SECOND (12) Manufactured in accordance with BS498:1990
With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 18.35

Half depth blockboard lower shelf ACCESSORIES - for addition to basic benches / 456 MEDIUM DUTY WORKBENCH ACCESSORIES
Cost : £ 109.39

SPARE TYRE/TUBE FOR PNEUMATIC TYRED WHEEL FOR REF 3172V --
Cost : £ 17.63

150KG LIGHT DUTY MANUAL LIFT TABLE. RAISED HGT 800MM > Available in standard steel or lightweight aluminium.

Specification (both models)
> Lifts from 255mm to 780mm
> Table top WxL: 450x760mm
> Overall WxL: 450x990mm
> Non marking tyres ensure no damage to floors
> Handle folds for eas
Cost : £ 377.18

Battery Water Purifier >Replacement cartridge to suit Ref. 103P095N.
>Each cartridge produces up to 250 litres of battery water to BS 4974. Colour change window indicates exhaustion. Single Cartridge
Cost : £ 59.34

180MM WET ONLY DIAMOND BLADE --
Cost : £ 27.67

CAST IRON WHEEL DIA 200MM --
Cost : £ 31.14

1/4'' UNION NUT (5) ¼ BSP. Display packed five unions per card. --
Cost : £ 3.38

STAINLESS STEEL REPLACEMENT WORKSURFACE - 1800X750MM 18swg stainless steel (3042B) bonded to 18mm MDF with turned down welded corners
Cost : £ 242.7

456 Knockdown Heavy Duty Workbenches - 450kg Capacity. >Range of accessories enabling you to turn your workbench into a complete workstation. Accessories
Cost : £ 81.13

PK OF 2 WHITE LONG KNOBS 25MM DIA. M5 THREAD INSERT. QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 11.05

EXTENSION WORKBENCH - LAMINATE WORKSURFACE - WXD 1200X600MM > From the three basic sizes a work area to suit almost any application can be created.
> The bolt together construction offers a high degree of flexibility. Initial layouts can be constructed to meet current requirements then re-arranged or added to
Cost : £ 260.26

"4 SHELF H.D STARTER BAY. SHELF DEPTH 24"" - OPEN ALL ROUND" > Four and six shelves.
> Standard or heavy duty.
> Choice of 3 shelf depths.
> Initial Bay and Add-on bays.
> Supplied with black plastic feet.
> Standard HxW: 72x36.
Cost : £ 164.74

PACK OF 250 OYSTER PAKS. LXWXH 275X180X80MM > Manufactured from high quality rigid corrugated paper with a white mottled outer liner.
> High crush resistance.
> Quick and easy to use.
> Suitable for despatch via parcel post.
Cost : £ 450.97

10 SNAP HOOKS 3/8'' (M10) 350K Zinc plated steel for corrosion protection. Packed 10 (approx.) per polythene bag. --
Cost : £ 8.04

BANQUET CHAIR - CHROME FRAME - CLARET > Available in a choice of fabric as shown. Please specify. Clipper will be supplied as
standard.
> Frame: chrome.
> Seat width x Seat depth x O/A height x seat height:
470x420x480x470mm.
Cost : £ 90.3

Sibille Electricians Hand Tools Safety hand tools for electricians In compliance with standard EN60900: 93.
Tools comply with Electricity Supply Industry Standard ESI26-3.
For work under tension up to 1000 volts AC 1500 volts DC.
Tools are coated with 2 layers of insulation whi
Cost : £ 25.85

K30 SERIES PLATE FIXING Swivel --
Cost : £ 67.56

BOLTS M12 X 150 (50) Zinc plated for corrosion protection. Packed in boxes of 50 or 100 (approx.) bolts. --
Cost : £ 21.34

SINGLE CLIP-ON CONNECTOR(ALG34 Manufactured and certified to EC Directive 86/217.
Industrial quality with single open-ended clip on connector. Suitable for use on garage forecourts and tyre fitting bays. A calibration certificate is supplied with each gauge. Carton packed.
150mm
Cost : £ 7.83

1800KG POWERED PALLET TRUCK. POWERED LIFT > Smooth three stage forward/reverse acceleration through simple and robust contactors with high burn-off resistance.
> Forks - torsion resistant design with high load capacity steel profiles. Raised/lowered height: 207/85mm.
N.B. Special fork width
Cost : £ 5621.2

L.HAND ZEST CORE WORKSTATION. WXD 1800X1200MM. BEECH > Zest is an extremely strong and functional range of office furniture.
> Grey or black steel frames support 25mm MFC tops with matching 3mm ABS edging. Please specify. Grey supplied as standard.
> Cable management available as optional extra. Co
Cost : £ 321.95

SPARE TUBE FOR ILLUMINATED MAGNIFIERS --
Cost : £ 18.51

T9X75MM TX-STAR S/DRIVER BULK “Draper TX-STAR“ drivers are compatible with †Torx fixing systems.
Satin chrome plated magnetic chrome vanadium steel blades hardened tempered with chemically blacked tip. Square matt black handles manufactured from high impact resistant
Cost : £ 2.0

PVC SHRINKFILM CENTREFOLD 400MM X 600M > Centre folded on a roll.
> 19 micron thickness.
> Roll length: 600 metres.
Cost : £ 58.75

CROSS DIVIDER. HXL 80X156MM > Enables the user to choose individual components to produce tailor made fitments for the storage of small components and cylindrical tools.
> Our comprehensive selection of standard drawer divider kits is also listed in the cabinet tables; this provi
Cost : £ 1.82

EXTRA/M S.S. CHAIN FOR DOUBLE LEG SLING - 13MM DIA > Chain hooks c/w safety catch.
> Test certificate supplied with each sling.
> Standard length 1 metre EWL.
Cost : £ 354.85

RUBBER TYRED WHEEL PLASTIC CENTRE DIA 50MM --
Cost : £ 2.7

MOBILE POLYTHENE DISPENSER. > Adjustable spindles from 1.2-2m.
> Brackets hold a maximum of 3 bars.
Cost : £ 256.74

3 POSITION DESK CLUSTER + WORK TOP. MID GRN/WHT BEECH FINISH >Innovative desk design leads to great floor space efficiency.
>Dividing shaped top screens provides privacy without isolation.
>Well planned environments encourage higher productivity and efficiency.
>FOC site survey and design survey available
Cost : £ 3313.5

STACKABLE WORK PAN - HXWXD 305X610X610MM >Choice of stacking or nesting pans.
>Spot welded galvanised steeel.
>REINFORCED RIM.
>half-lift handles.
>Capacity: 25kg
Cost : £ 23.09

GROUT RAKE C/W 2 BLADES For removing old grouting between ceramic or flooring/quarry tiles. The rake is supplied complete with two similar blades. Single blade mounting is used for grout removal from ceramic tiles and double blade mounting for flooring/quarry tiles. Display pack
Cost : £ 3.14

Fixed plywood shelf HEAVY DUTY STEP TRAY TROLLEYS
Cost : £ 314.9

SET OF 100 RECTANGULAR PUSH-ON END PIECES.60X20MM.QTY: 5+ Rectangular push-on end pieces with black plastic edges.
Cost : £ 27.61

CABINET C/W 11 SHELVES & 52 RED NXT4 BINS. 2000X1015X430MM > Delivered fully assembled.
> Robust all steel construction.
> Shelves adjustable at 50mm centres.
> Fully recessed handle with 2 keys and a 3 point locking mechanism.
> Finish - Silver carcass and Blue doors.
Cost : £ 661.53

PACK OF 2 KEY PANELS. WXH 500X457MM. GREY > This system is based on a range of tough metal panels perforated with a regular pattern of square holes.
> A wide variety of steel tools and parts holding accessories can be located at any position on the panelwork.
> Each accessory is designed to
Cost : £ 26.79

3.2X15.8MM RIVET(50 PER CARD)) Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed. --
Cost : £ 1.5

MOBILE WELDING BOOTH - ORANGE STRIPS. > Strong tube construction and finished in grey enamel.
> Welding booths can be supplied with welding curtains or strips.
> Strips are fastened to the screen by plastic suspension system.
> Plastic suspension hooks supplied for fastening the weld
Cost : £ 1010.5

2 ROLLS SMALL BUBBLE ROLL WXL 750MM X 100M > Small bubbles are more versatile.
> Transparent.
> Heat sealable.
> Bubble size 10mm.
> Premium bubble flim offers a greater puncture resistance for odd shaped items as well as retaining air over a long period of time.
Cost : £ 46.41

JUNIOR AUTOMATIC CENTRE PUNCH Light duty model. High grade steel tip and hardened point. Chrome plated knurled brass body. Display packed. --
Cost : £ 4.51

K30 SERIES PLATE FIXING - Swivel --
Cost : £ 63.45

MOBILE PEDESTAL C/W 3 BOX DRWS 420X540X520MM. PEARL GREY > Filing drawers are fitted with cradle to accept A4 or foolscap.
> An interlocking drawer selection mechanism (anti-tilt) prevents a second drawer opening whilst one is in use.
> Stylish curved drawer handles for ease of use to extend drawers.
>
Cost : £ 191.82

Syphon Pumps "> Polyethylene construction with the exception of model B which has PVC uptake tube.
> No internal wearing surfaces to fail.
> A B with bellowa type hand pump; C with compressible bulb.
> A 2"" BSP adaptor for 210ltr drums. Delivery: 8 ltr/min.<
Cost : £ 25.85

WORKBENCH WITH LOWER SHELF. VINYL SURFACE. 1500X750MM > 2mm grey vinyl bonded onto 18mm MDF.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Standard height: 840mm.
> Bench HxWxD: 1800x
Cost : £ 391.04

8 POSITION CAROUSEL CLUSTER. MID RED WITH OAK FINISH >Innovative desk design leads to great floor space efficiency.
>Dividing shaped top screens provides privacy without isolation.
>Well planned environments encourage higher productivity and efficiency.
>FOC site survey and design survey available
Cost : £ 3196.0

FULLY CONVENTIONAL HANGERS. BLACK PLASTIC - PACK 10 > Available in plastic or wood.
Cost : £ 17.63

"CUSHION TYRES & POLYPROP CENTR WHEEL DIA 200MM - BORE 1/2""" --
Cost : £ 7.87

EXTRA FOR SHORTENING CLUTCH 13MM DIA 4 LEG > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 212.91

TRANSFER KIT - HOSE C/W TAP FOR DRUM TO DRUM TRANSFER. > Transfer kits to suit Refs. 100 - 102S165A.
Cost : £ 48.76

PLASTIC BOX C/W 550 ASSORTED NUTS & BOLTS. Contents: Nuts (dimension x quantity): 3x100 / 4x80 / 5x50 6x45. Bolts : (3x25)60 / (3x30)40 (4x25)45 / (4x40)35 / (5x25)30 (5x40)20 / (6x25)20 / (6x40)15 (6x50)10.
Cost : £ 27.03

T6X75MM TX-STAR S/DRIVER BULK “Draper TX-STAR“ drivers are compatible with †Torx fixing systems.
Satin chrome plated magnetic chrome vanadium steel blades hardened tempered with chemically blacked tip. Square matt black handles manufactured from high impact resistant
Cost : £ 2.0

PHENOLIC RESIN WHEEL. WHEEL DIA 200MM - BORE 20MM --
Cost : £ 56.4

150MM FLAT FILE-SMOOTH (12) Manufactured in accordance with BS498:1990
Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 19.62

"3 SHELF OFFICE/IND. CUPBOARD. O/A 72X36X18"". LT.GRY/BLUE" > All steel riveted/welded construction.
> Semi-concealed hinges for security and clean line appearance.
> Rubber grommets fitted for secure door fit and quiet operation.
> Doors fitted with stiffeners for added strength and security.
> Metal
Cost : £ 266.55

LAMINATED STEEL PADLOCK 45MM Draper Security Rating: 3
Laminated zinc plated steel case and brass cylinder. Supplied complete with two keys. Key blanks are available. Display packed. --
Cost : £ 3.13

T Towels > Pack of 20.
> 100% cotton.
Cost : £ 24.09

K154 SERIES Ball type furniture castors VARIOUS FIXINGS --
Cost : £ 24.68

COMPUTER COMPONENT BOXES. 208X152X95MM - PK OF 50 "> Small size to suit 31/2"" hard drive.
> Large szie to suit 51/4"" hard drive and CD ROMs.
> Supplied in packs of 50."
Cost : £ 51.35

25 MACHINE SCREWS PANHEAD M3X8 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Zinc plated. Packed in polybags of 25 (approx.) screws.
*Pozi/Supadriv are registered trademarks of European Industrial Services Ltd. --
Cost : £ 0.21

PADLOCK > Very good quality security
padlock.
> Double click closure.
> Supplied with 2 steel keys.
> N.B. Padlocks not supplied keyed alike.
Cost : £ 4.52

SET OF 5 YELLOE MARKER CONES. 457MM HIGH > Plastic with weighted bases.
> Grooved top to support lath or cane.
> 457mm high.
Cost : £ 23.15

"7/8 X 1"" LARGE D SHACKLE SWL 3 TON - SCREW PIN" --
Cost : £ 13.51

DESK HEIGHT PEDESTAL. 2 DRWS & I FILING. BEECH/BEECH Mobile
> Choice of 2 drawers (of which 1 filing drawer for A4 suspension files) or 3 drawers with telescopic ball bearing rails.
> Central locking on all drawers.
> Cylinder lock and hinged key which prevents from breaking.
> Complete wooden
Cost : £ 242.34

METRIC DEEP OFFSET RING SPANNER 22X24MM X 315MM LGTH >Manufactured to DIN 838 specification.
>Ring end cranked at 15 degrees.
>Ring ends have 12 corners with special radius design giving added torque.
Cost : £ 10.34

P/FORMED LAMINATE BENCH AND SHELF. LXW 1500X900MM. > 1.3mm laminate on 18mm MDF with post-formed edge.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Standard height: 840mm.
> Bench
Cost : £ 479.05

15 DRAWER CABINET. HXW 940X920 DRAWER DEPTH 190MM - GREY/BLUE >Manufactured form 1 and 1.2mm steel sheet.
>Seam and spot welded.
>Each drawer supplied with self-adhesive label holder.
>Overall Cabinet depth
drawer depth 190mm = cabinet depth 270mmm.
drawer depth 290mm = cabinet depth 370mmm.
drawer
Cost : £ 349.56

STEEL/POLYURETHANE TYRE PALLET ROLLERS WITH BEARINGS. 75MM --
Cost : £ 25.85

PACK OF 100 PLASTIC COVERED HOOKS FOR CORD DIA 6-7MM > Plastic covered mild steel end hooks suitable for use with Refs. 100 - 107W045N.
Cost : £ 35.25

LAMINATE WORKSURFACE - WXD 1500X900MM - GREY > Range of replacement worksurfaces.
> In many situations a workbench frame remains usable whilst the worksurface has deteriorated and needs replacing or upgrading.
> 1.0mm grey laminate on 18mm MDF with wooden or plastic edge.
Cost : £ 150.4

PROBE SET Specification shown in ‘Digital Multimeters‘ Table. Display packed.
*Sold loose. --
Cost : £ 2.36

'V' GROOVED CAST IRON WHEEL WHEEL DIA 200MM - BALL BEARING --
Cost : £ 101.64

MINI RD.POINT SHOVEL FG HANDLE Pressed mild steel blade with fibreglass shaft and Y-dee shaped handle. Ideal for work in restricted areas.
Sold loose. --
Cost : £ 9.94

Container Dispenser > Welded steel construction.
> Finish: black epoxy paint.

N.B. O/A height includes handle. For 25ltr square round containers.
Cost : £ 123.02

TV-VIDEO/DVD WALL SUPPORT SIZE 2 - WXD 508X305MM >Supplied complete with an adjustable telescopic VCR/DVD support which can be removed if not required.
>An adjustable position safety strap is included which can be located in the optimum position around the TV case.
>Height adjustable mount will ac
Cost : £ 125.73

MAINS LARGE INDDOR COMMERCIAL CLOCK. DIA 650MM > Metal cased clocks with grey hammer finish.
> White faces with black hands and batons.
> Quartz or mains movement (battery included with quartz clocks).
Cost : £ 258.5

LOCK FOR CPU HOLDER > External or internal printer shelf. WxD: 670x430mm.
Fits on the outside or inside of workstation leg frame.
> CPU holder. Adjustable in size to accommodate various CPUs. Lock and swivel element also available. Supplied in silver.
Cost : £ 96.94

CUT/WHEEL-STONE.230X3.0X22.2MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade C30-S-BF 80 medium hard. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 1.69

'CAUTION SPEED RAMP'- 450X600 450X600MM - WALL MOUNTED. > Manufactured from 3mm thick aluminium sheet.
> Available for wall or post mounting.
> Signs for wall mounting will be supplied undrilled and without fixings.
> Signs for post mounting are supplied with 76mm dia. fixing clips as standard. Please
Cost : £ 67.56

RUBBER PROTECTIVE MAT FOR 500MM CABINET. > Shelf: adjustable shelf available to give extra storage facility.
> Top tool tray: 25mm high top perimeter safe edge with fully welded corners.
> Protective mat: 3mm ribbed rubber mat which can be used in conjunction with top tool tray or by itsel
Cost : £ 22.68

RUBBER TYRED WHEEL. CAST IRON CENTRE. BORE 12MM - DIA 150MM --
Cost : £ 54.64

DOCK BOARD. O/A WXL 1520X910MM CAPACITY 3640KG > Anti-slip tread plate - design keeps edges flush with dock or truck during loading/unloading operation.
Safety side curbs fitted as standard.
Cost : £ 665.05

PNEUMATIC TYRED POLYPROP.WHEEL DIA 220MM. ROLLER BEARING --
Cost : £ 26.44

BLOCKBOARD WORKSURFACE - WXD 1500X600MM > Range of replacement worksurfaces.
> In many situations a workbench frame remains usable whilst the worksurface has deteriorated and needs replacing or upgrading.
> 18mm blockboard with wooden edge sealed with clear polyurethane varnish.
Cost : £ 88.71

STEEL STRAPPING. COIL WXL 16MM X 400M - PER 2 COILS Ribbon Wound Steel Strapping
> Single wound rolls for smaller users.
> Sheared and dressed edges for safety.
> Paper wound for protection.

Oscillation Wound Steel Strapping
> Cross wound longer length rolls for heavy users.
> Shear
Cost : £ 45.83

Nite-Glow Tapes And Markers > Self-adhesive vinyl tapes.
> Will adhere to non-porous surfaces.
> Easy to apply and clean.
> Supplied in 10 metre long rolls. For escape route marking. Arrow tape
Cost : £ 72.26

PACK OF 10 DUST BAGS TO SUIT REF 102N201 Various dust bags to suit all models
Cost : £ 8.46

BANDSAW BLADE 1505MMX1/4''X24T For all Draper bandsaws and other manufacturers similar machines. Display packed. --
Cost : £ 9.24

NO.2X38MM C/SLOT S/DRIVER-PKD Satin chrome plated chrome vanadium steel blades hardened and tempered with shot blasted tip. Some sizes have a hexagon bolster which enables extra power to be obtained by use of a spanner. Square matt black handles manufactured from high impact resistant
Cost : £ 1.5

PACK 5 S/A SAFETY SIGNS 100X 75MM. DO NOT DRINK. > Available in self-adhesive vinyl or 1mm thick PVC.
Cost : £ 9.28

PACK 2 50MM PROVENCE KNOBS C/W M10 THREADED INSERT. Can also be used in through hole version as the closure cap can be removed. Excellent impact resistance thanks to its polyamide composition reinforced with 30% glass fibre.
Cost : £ 4.52

Ultimate Flipchart Easel > Totally height adjustable.
> Double sided dry-wipe magnetic writing surface.
> Stable loop leg base acts as a foot bar.
> Whiteboard tilts to any angle and can be positioned suitable for pad preparation.
> Pen tray hinges up for safety.
>
Cost : £ 145.7

PK OF 50 MAILMISER JIFFY BAGS INT. SIZE 340X445MM. 3+ PKS > Extra strong side welds.
> Self-sealing envelope style closure.
> Choice of 10 sizes in white Kraft. 3+ packs
Cost : £ 29.38

BLACK BISLEY 10 DRAWER CABINET 670X280X410MM > Welded steel body and drawers.
> Chromium-plated handgrips and cardholders.
> Optional insert trays for optimal versatility.
> Drawers - WxD: 235x380mm.
Cost : £ 128.84

EXTRA/M S.S. FOR THIMBLE EYE SLING - 10MM DIA > Manufactured from high grade stainless steel to AISI 316 standards.
> 1x19 Wire Rope - rigid construction. Suitable for basic rigging.
> 7x19 Wire Rope - flexible construction. Suitable for various applications.
> Slings - thimble eye or soft e
Cost : £ 15.28

"TYPE A - ALL STEEL SCISSORS. O/A SIZE 6""." A - All steel
B - Tough cut
C - Multi-purpose
D - Recycled
Cost : £ 6.93

HALF HGT GAS CYLINDER STORAGE CAGE. HXWXD 1270X1270X1270MM > Square tube frame with 50x50mm mesh infill.
> Hot dip galvanised finish.
> Fully opening hinged doors for easy access.
> Fitted with hasp and staple for padlocking as standard (padlock not supplied).
> All sizes available with or without pal
Cost : £ 519.35

PACK OF 5 PLIER HOLDERS. WXD 55X20MM > The system is based on a range of tough metal panels perforated with a regular pattern of square holes.
> A wide variety of steel tools and parts holding accessories can be located at any position on the panelwork.
> Each accessory is designed to
Cost : £ 6.7

COLLET CHUCK 6MM > Accessories for Refs. 1036890 and 1036907.
Cost : £ 14.1

STANDARD BENCH WITH LAMINATE WORKSURFACE LXW 1500X900MM FEATURES OF RANGE:
Workbenches
? Sturdy heavy duty framework benches.
? Full range of cupboard and drawer accessories (see facing page). Can be installed on left or righthand side benches.
? Standard height 840mm (750 or 900mm avaialbe on requ
Cost : £ 408.61

SAW HOLDER > Zinc plated.
> Can be located any any position where holes appear.
> Securely located by a plastic clip.
> Quickly and easily repositioned when necessary.
Cost : £ 3.82

TURBO LANCE (PW2220) --
Cost : £ 69.17

WHITE PACKING FOAM. ROLL LXW 200M X 1500MM. 5+ PACKS > Dust and lint free.
> Water resistant and non-abrasive.
> Choice of standard white foam or heavy duty
blue with extra thick ribbing.
Cost : £ 66.98

CUT/WHEEL-METAL.125X2.5X22.2MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade A30-S-BF 80 medium hard. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 0.92

Timers > Counts up/down 100 hours.
> Timing completion alarm.
> 4 timing channels and clock.
> Back clip with magnet.
> WxH: 69x59mm. Extended Timer
Cost : £ 19.39

32 DRUM SAFETY STORES. SLIDING DOORS. LXW 6000X1550MM. > Frame manufactured from 50x50x3mm rolled hollow section. Cladding manufactured from 2.5mm profiled mild steel sheet.
> Two-level storage - will accept drums stored 4 per pallet. Drums storage capacity assumes 200/220 ltr size.
> Removable galv
Cost : £ 6397.35

S.S 5MM DIA DOUBLE LEG CHAIN SLING > Chain hooks c/w safety catch.
> Test certificate supplied with each sling.
> Standard length 1 metre EWL.
Cost : £ 345.45

BANQUET CHAIR - CHROME FRAME - CLARET > Available in a choice of fabric as shown. Please specify. Clipper will be supplied as
standard.
> Frame: black or chrome. Please specify. Black supplied as standard.
> Seat width x Seat depth x O/A height x seat height:
458x560x900x490mm.
Cost : £ 76.02

64LTR DISTRIBUTION CONTAINER. LXWXH 600X400X350MM - BLUE > This range provides safe and secure storage.
> Manufactured from polypropylene.
> Single security seal provides maximum tamper evidence.
> Interlocking lid providing strength and durability.
> Tamper proof lid hinges.
> Stackable by slidi
Cost : £ 17.04

50W VIKING LIGHT - 12V > Ref.291M023: 400mm goose neck arm.
> Ref.292M023: ultra bright light on 400mm good neck arm.
> Ref.293M023: low voltage spot with built-in transformer on 400mm goose neck arm.
> Ref.294M023: 240V 50W on 2 x 400mm goose neck arm.
Cost : £ 85.89

ACETATE VISOR FOR CLIPTITE HELMET - PER 10 Visors
> Supplied complete with carrier for fitting to helmet.
> Aluminium rim for added strength and shape retention.
> Polycarbonate - for resistance to particle impact. Kitemarked and tested to EN 166. B.3.9.
> Acetate - for protection agai
Cost : £ 203.28

NEOPRENE G.P RUBBER SHEETING 3MM THICKNESS. LXW 10 X 1.4M >A commercial grade of Neoprene/SBR blended general purpose sheeting with resistance to grease some inorganic chemicals and oils with good ageing and weathering charateristics. Working temperatures between minus 30 to plus 100 degrees C.
>Available in
Cost : £ 203.28

10X100 S.S. SCREW GATE CARBINE HOOK W/O EYELET > Pear shaped hooks.
> Conform to AISI 316 standards.
Cost : £ 12.57

HEAVY DUTY DOUBLE HINGE S/HASP Hardened steel with a quality chrome and duplex nickel plated finish. Designed for high security applications. Supplied complete with recessed and concealed fixings. Display packed. --
Cost : £ 9.49

EXTENSION TUBE FOR WDV8 --
Cost : £ 1.75

BRAD NAIL 45MM For use with Draper Nailer or Combination Nailer/Stapler and other manufacturers similar machines.
Sold in boxes. --
Cost : £ 8.59

K95 SERIES PLATE FIXING --
Cost : £ 21.74

6'' FLUSH BOLT Polished and lacquered. Suitable for use on pairs of doors to provide extra security or hold shut. Supplied complete with fixings. Display packed. --
Cost : £ 2.46

HIGH TEMP. PHENOLIC M/DUTY CASTOR. 80MM DIA. SWIVEL > Swivel and fixed types.
> Wheel centre: thermoplastic
> Wheel tyre: none
> Wheel bearing: plain
Cost : £ 19.21

PARASOL BASE FOR REF 393L031N > Table dia: 980mm.
> Parasol supplied in white and red stripes.
> Table colour: white.
Cost : £ 12.22

REL/DRUM TRUCK. CAP 1500KG WIDTH OVER FORKS 964MM > Capacity: 1500kg.
> Low lowered fork height compared to standard pallet trucks - only 65mm.
> Raised fork height: 185mm.
> Fitted with nylon steer wheels and single steel load rollers.
Cost : £ 893.0

PACK 10 STEEL M8 SHORT KNURLED NUTS. QTY 6+ PACKS --
Cost : £ 10.81

BOX OF 12 ARGON GAS CYLINDERS Supplied in disposable cylinders. Gas volume 700cc/tare weight 1210g. (all gases). Sold 12 per box. --
Cost : £ 144.67

MULTI-RASP SHAVER Plastic holder with replaceable high carbon steel curved blade size 65 x 40mm. Supplied complete with spare blade. Display packed. --
Cost : £ 2.68

WHITE PACKING FOAM. ROLL LXW 200M X 1500MM. 1-4 PACKS > Dust and lint free.
> Water resistant and non-abrasive.
> Choice of standard white foam or heavy duty
blue with extra thick ribbing.
Cost : £ 69.33

`GUIDELINE' WALL MOUNTED CARTRIDGE - BLK/YELLOW CHEVRON >Available in a choice of two or four way post systems.
>Four way posts are fitted with a low profile base.
>Choice of accessories to suit. Note wall mounted cartridge comes with wall receiver.
>3 year warranty.
>Choice of finish: powder coate
Cost : £ 100.46

CANTEEN SET. 1200X600MM.LT.GRY /BEECH TOP. GREEN/LT.GRY CHAIR > Set consists of: 1 Canteen table (1200x600mm or 1200x800mm) and 4 bucket seats without arm rests in a selected colour (with the exception of the chrome based frame).
Cost : £ 115.15

PERMANENTLY FIXED GIRDER CLAMP SWL 1000KG > For use where permanent overhead anchor points are required.
> Jaw aperture: 22mm.
> Lifting eye vertical aperture: 40mm.
> Jaw grip adjustment: 75-190mm.
> Body to BS 4360.
Cost : £ 95.18

PACK OF 10 9V CELL DURACELL PROCELL ALKALINE BATTERIES > Heavy duty alkaline batteries for industrial and business users.
> Efficient operation over a wide range of temperatures.
> Excellent resistance to vibration and shock.
> Guaranteed leak proof under normal conditions.
> Each battery date sta
Cost : £ 24.09

DRY PICK UP VAC. CAPACITY 65 LITRES. 2 MOTORS. - 240 VOLTS > Canister style cleaner manufactured from a non-rusting 304 grade mirror finish stainless steel.
> All vacuums supplied with 10m cable (fitted with plug).
> Mounted on a sturdy plastic chassis or a demountable tubular steel caddy.
> Rubber tyred
Cost : £ 739.08

25 MACHINE SCREW PANHEAD M6X40 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Zinc plated. Packed in polybags of 25 (approx.) screws.
*Pozi/Supadriv are registered trademarks of European Industrial Services Ltd. --
Cost : £ 0.82

SMALL ZIP ROUND WALLET. HXWXD 225X155X50MM >Type A:Small zip round wallet with storage capacity for approx. 13 tools.
>Type B large zip round wallet with pouch storage capacity for approx. 33 tools.
>Type C: Long zip round wallet with storage for approx. 10 tools-ideal for long reach screwdr
Cost : £ 19.98

BICYCLE LIGHT (FRONT) Universal fitting for most types of bicycles. Supplied with ‘quick release‘ mounting clamp. Dual light setting switch for low or high beam. Uses 4 x AA batteries (not supplied). Display packed. --
Cost : £ 10.83

SAW BLADE TCT 184X30MMX20T Quality tungsten carbide tipped (T.C.T) blades hardened and strengthened to ensure a long life. Display packed. Unit of Sale: 1 blade. --
Cost : £ 15.29

STAINLESS STEEL DUTCH HOE Polished blade securely fixed to tubular steel handle. With black plastic hand grip with hang hole. Sold loose. --
Cost : £ 15.56

PACKHAM SEAT - 1800MM LONG WITH ARMS. PEDESTAL FIXING > Timber slats 110x95mm.
> Front and rear timbers are each splayed towards central slat to create slightly dished seating surface for extra comfort.
> Black plastic coated frames.
> Timber colour: light mahogany. Other shades available upon req
Cost : £ 643.9

MODEL B LAMINATE PEDESTAL BENCH LXD 1500X760MM > Steel: 14swg with 50mm retaining lip.
> Laminate: 1.3mm laminate on 24mm MDF with a wooden edge; colour: grey.
> Lino: 2.0mm lino on 24mm MDF with a wooden edge; colour: grey.
Cost : £ 667.64

DRAIN PLUG KEY SET Chrome vanadium steel hardened and tempered. For use with 3/8“ square drive accessories. Display packed.
Contents:
• 8mm/5/16“ hexagon
• 11mm square
• 17mm hexagon
• 8mm square
• 3/8“ square


Cost : £ 14.92

GARDEN ''Y'' SNAP-IN CONNECTOR --
Cost : £ 0.62

GRINDING WHEEL 75X13X6.5MM Medium grade BA60-MV. Maximum speed 7600 rpm. Display packed. --
Cost : £ 2.0

WALL/DOOR MOUNTED CHANNEL - SILVER >Windows based Slidesign programme is easy to load and operate on your PC.
>Compatible with Windows 95 and later editions as a single user system.
>Templates are provided on screen into which the required text is typed.
>Font style and size of te
Cost : £ 18.21

COACH BOLT M6 X 75 (100) Carbon steel hardened and tempered with hexagon nut. Plated finish. Packed in boxes of 50 or 100 (approx.) bolts. --
Cost : £ 6.24

PACK OF 2 KEY PANELS. WXH 500X457MM. - GREEN > This system is based on a range of tough metal panels perforated with a regular pattern of square holes.
> A wide variety of steel tools and parts holding accessories can be located at any position on the panelwork.
> Each accessory is designed to
Cost : £ 26.79

PLASTIC BOX Slotted countersunk round head screws in accordance with DIN 7973C
Cost : £ 28.26

GREY SHELF WIDTH 457MM > Fitted using spring clips - adjustable at 37mm increments.
> Pack quantity 5
Cost : £ 27.67

SCHOOLS/CLUB TRAINING BIBS - MEDIUM YELLOW - PACK 10 > Manufactured from nylon.
> Elasticated/ velcro fastening sides.
Cost : £ 45.94

SPARE TYRE/TUBE FOR PNEUMATIC TYRED WHEEL FOR REF 3176V --
Cost : £ 19.39

MINI IN LINE OILER 1/4 BSP To keep air tools lubricated. ¼“ BSP thread. Can be used with most of the air tools shown in this Catalogue. Display packed. --
Cost : £ 7.04

DOUBLE DOOR PESTICIDE CABINET. HXWXD 915X915X483MM > Manufactured to the same high standard and specifications as the SC Series.
> Specifically designed to comply with the recommendations for the storage of pesticides.
> Vents are incorporated at high and low level in the doors.
> Supplied with a
Cost : £ 332.58

SAW BLADE TCT 160X20MMX40T Quality tungsten carbide tipped (T.C.T) blades hardened and strengthened to ensure a long life. Display packed. Unit of Sale: 1 blade. --
Cost : £ 16.71

1 PAIR S/D 75MM BRASS HINGES Solid drawn brass. Supplied with fixings. Carton packed. --
Cost : £ 2.33

LEATHER MEDICINE BALL. WEIGHT 4KG > Manufactured from top quality cowhide.
Cost : £ 24.38

BRIT GALV HAND PALLET TRUCK. WTH OVER FORKS X LTH 520X1060 > Cold store protected for continuous service in temperatures down to - 30?C.
> Galvanised frame and linkages.
> Hydraulic pump unit with stainless steel plunger.
> Special seals.
> Synthetic oil.
> Steel axles and axle pins.
> Rubber si
Cost : £ 882.43

FIRST AID STATION REFILL KIT >Displays clearly visible instruction on dealing with common injuries.
>Open fronted for ease of access.
>Container: 40 disinfectant wipes; 1 resiscitation kit; 1 large blood stopper; 3 mini bloodstoppers; 40 fabric plasters; 45 washproof plasters;
Cost : £ 34.43

TYPE L - DOLLY FOR 980X500X400 BASKETS. >Fitted with 4 swivel castors
Cost : £ 57.58

End Fenders > Stops bowls rolling off playing area.
> Wooden.
> Painted white.
> Length: 1.83m.
Cost : £ 108.16

CORNER POLE FLAGS - NAVY BLUE PER 4 > Nylon flags with sewn-in sleeve and ties.
> Size: 305x290mm.
Cost : £ 16.74

1000 DRY WALL SCREWS 3.5 X 25 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
For fast fixing of plasterboard to light steel or wood studs without the need to pre-drill. Piercing point-type with twin threads and bugle head allowing setting to the correct depth w
Cost : £ 5.28

PLASTIC SHELVING. WXDXH 1000X400X1520MM > Hygienic.
> Maintenance free.
> Easy to clean.
> Suitable for the food industry.
> Easy to assemble with a game of module.

Features:
> Square profile of 50 x 50 mm with round angles.
> Heat resistant between - 40 and 80 degrees
Cost : £ 175.08

NESTING WORK PAN - HXWXD 305X610X610MM > Choice of Stacking or nesting pans.
> Spot welded galvanised steel.
> Reinforced rim.
> Half-lift handles.
> Capacity: 25kg.
Cost : £ 20.56

STACKING TRAY. O/A LXW 762X457 32LTR CAP. PERF SIDE/SOL BASE > Available in three heights.
> All trays interstack with each other.
> O/A LxW: External - 762x457mm.
Internal - 715x412mm.
> Secure cross stacking of trays and lids improves air circulation thereby accelerating product cooling.
> Slide s
Cost : £ 12.46

COUPLING BODY 1/2''F TP M100 Designed for machine applications with high airflow demands. BSP taper. Maximum airflow rate 3420L/min (120cfm) at 6.9bar (100psi). Maximum working pressure 20.7bar (300psi). Sold loose. --
Cost : £ 19.43

BLOCKBOARD WORKSURFACE - WXD 1200X900MM > Range of replacement worksurfaces.
> In many situations a workbench frame remains usable whilst the worksurface has deteriorated and needs replacing or upgrading.
> 18mm blockboard with wooden edge sealed with clear polyurethane varnish.
Cost : £ 130.43

FIXINGS WITH TWO THREADED RODS DEFL.15 MM. --
Cost : £ 19.98

GLAZED FRONTED LETTERBOARD - HXW 922X646MM - BROWN > Grooved felt covered board with gold colour trim for attractive appearance.
> Changeable letters simply push inand pull out.
> Covered in quality felt for long lasting good looks.
> Attractive curved and mitred in gold finish.
> Supplied wit
Cost : £ 337.23

S/S SELF ASSEMBLY WASH UNIT. HXWXD 850X1800X650MM. 1 BOWL. > 1.2mm 304 stainless steel top and shelf.
> 30mm 304 stainless steel legs.
> Plastic adjustable feet.
> Sound deadened top.
> Removable undershelf.
> Drainers can be fitted left or right handed. Right will Please specify. be supplied as st
Cost : £ 717.93

PACKHAM BENCH - 1800MM LONG PEDESTAL FIXING > Timber slats 110x95mm.
> Front and rear timbers are each splayed towards central slat to create slightly dished seating surface for extra comfort.
> Black plastic coated frames.
> Timber colour: light mahogany. Other shades available upon req
Cost : £ 384.23

TWO PART ALUMINIUM PUSH-UP LADDER - EXTENDED LENGTH 6.2M > Push-up trade range certified to EN 131 (BS 2037 Class 2).
> Suitable for all types of trade work.
> Rigid box section stiles.
> Large D-shaped rungs for comfort.
> Moulded feet for non-slip grip.
Cost : £ 130.43

6 X 2LTR PURE CARTRIDGES FOR THE MAXIPOR DISPENSER For industrial use.
> An effective soap with natural coconut oil that has a light scent with no lingering odour.
Cost : £ 51.11

PETROL COMP. FRAME 100LT 5.5HP Air receiver CE Approved.
Features:
• Driven by Honda 5.5HP petrol engine
• Oil alarm equipped
• Air-cooled 4 stroke engine
• High output
• Robust construction
• Belt drive
• Twin outlet regulator
Cost : £ 1764.54

PACK OF 10 WASTE MESH BASKETS. BEIGE > Polypropylene.
> Solid base.
> Hxdia: 300x314mm.
> Capacity: 16 litres.
> Pack of 10.
Cost : £ 21.8

"CUSHION TYRE & POLYPROP CENTRE WHEEL DIA 250MM - BORE 3/4""" --
Cost : £ 11.87

EASYFOLD SEMI-CIRCULAR TABLE - BLACK LEGS - LIGHT GREY > Easyfold looks smart in any environment.
> Available with attractive beech or light grey laminate tops. Please specify. Beech supplied as standard.
> Slim steel folding framework in black or chrome.
> All tables have leg adjusters to overcome
Cost : £ 278.48

Bott Series 55 Maintenance Trolleys > Set of 10 storage bins for use on the louvred panels of the cupboard section. 10 Storage Bins
Cost : £ 12.46

FLANGED CAST IRON WHEEL 75MM DIA --
Cost : £ 42.89

EXTERNAL SHOWCASE. PORTRAIT FORMAT. 1050X1130MM >Attractive contoured satin aluminium case with non-fade natural cork interior.
>2 locks for additional security.
>Shatterproof polycarbonate glazed door.
>Available in portrait or landscape format.
Cost : £ 428.7

WELDING ELECTRODES 2MM 428 PCS E6013 to BS639 Specification.
General purpose medium coated rutile type mild steel electrodes suitable for all types of welding joint. Low spatter and self-releasing slag. Supplied in packs by weight.
* Approximate weight --
Cost : £ 25.63

DOCK BOARD. O/A WXL 1520X1520 CAPACITY 3640KG > Anti-slip tread plate - design keeps edges flush with dock or truck during loading/unloading operation.
Safety side curbs fitted as standard.
Cost : £ 928.25