CARTON OF 36 ROLLS BROWN VINYL TAPE. WIDTH 50MM > Sticks immediately - no messing with water or glue.
> Burstproof - tightly seal and secure your packages.
> Tough and strong - made from strong PVC film.
> Colour: brown or clear.
> N.B. packs of one colour only.
Cost : £ 65.8

PK OF 2 BLACK LONG KNOBS 45MM DIA. M10 INSERT THREAD QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 9.99

PACK OF 5 PAINT BRUSHES. 100MM > Pure bristle paint brushes.
> Square out ends held in stainless steel ferrule.
> Painted hardwood handle.
> Display packed.
> Available in 8 widths.
Cost : £ 21.56

Cleaning Brushes > Deck scrubs.
> Plastic broom head with screw in handle socket.
> 38mm union mixture bristles.
> Suits broom handle Ref. 120J058A. Wide Deck scrubbing brush
Cost : £ 6.93

INSULATION TAPE - YLLW & GRN Manufactured to BSEN 60454 Specification
Self-adhesive PVC earth colour tape. Shrink wrapped and sold loose. --
Cost : £ 0.71

PACK 10 STEEL M10 KNURLED NUTS --
Cost : £ 49.35

BALL JOINT SEPARATOR(19MM CAP) Forged carbon steel body with plated finish. Jaw opening 19mm and throat depth 70mm. Display packed. --
Cost : £ 5.41

125MM RUBBER BACKING DISC Supplied complete with 6mm diameter arbor assembly. For use with 125mm diameter sanding discs. Display packed. --
Cost : £ 2.03

2M SINGLE LEG SLING. DIA 10MM > 6 x 19 construction wire rope to British standards.
> Strops with eye each end.
> Slings supplied as standard with safety hook. shackle can be fitted at extra cost.
> Stamped with serial number and WLL.
> Safety factor 5 to 1.
> Test cert
Cost : £ 34.49

EXTRA FOR SECURITY BARS FOR REF. 268B151A - PER 2 > Security Bar - Drilled to accept padlock (padlock not supplied).
> Purchase separately as and when required.
Cost : £ 38.19

SACK TRUCK - OPEN TOE PLATE 200KG CAP. HXW 1065X540MM. 125kg capacity
> O/A: HxW 965x540mm.
> Back frame curved across width.
> Open toe plate - WxD: 380x200mm.
> 160mm diameter wheels.
>Weight: 10.5kg.

200kg capacity
> O/A: HxW: 1065x540mm.
> Rear frame curved across truck width.<
Cost : £ 107.04

3/4 X 7/8 LARGE BOW SHACKLE SWL 2 TON - BOLT --
Cost : £ 27.61

10 PERSON FIRST AID REFILL KIT HSE Approved
First aid kit in durable plastic box with carrying handle. Suitable for areas with fewer than 10 people employed and where low risk is expected. Display packed.
Contents:
• box of 20 assorted waterproof plasters
• 2 x No
Cost : £ 11.21

YELLOW LINE SPRAY PAINT. 500ML PER 12 > Economical line spray trolley for applying lines from 70-110mm wide.
> Automatic positioning of the spray paint canister.
> Extra heavy front end for stability and applying perfectly straight lines.
> Adjustable line indicator.
> An edging d
Cost : £ 128.96

OPEN FRONTED LETTERBOARD - HXW 910X634MM - RED > Grooved felt covered board with gold colour trim for attractive appearance.
> Changeable letters simply push inand pull out.
> Covered in quality felt for long lasting good looks.
> Attractive curved and mitred in gold finish.
> Supplied wit
Cost : £ 193.88

L.H ICTUS COMPACT WORKSTATION. BEECH/BEECH > 25mm thick tops with scratch resistant melamine finish and shock absorbing ABS edge. Available in light grey or beech.
> 25mm thick side and front panels are made of melamine in anthracite or beech.
> Desk height 720mm.
> Each desk has two cab
Cost : £ 207.39

DOUBLE SIDED FOAM. 19MM X 33M THICKNESS 1MM. QTY 5+ >High performance transparent double sided foam.
>Ideal for applications where coloured tape cannot be used.
USAGE:
>Fixing of transparent materials such as glass or plastic. All applications requiring transparent assembly.
CHARACTERISTICS:
Cost : £ 77.55

TIMBER DECKING - CLOSED DECK. O/A LXD 2700X900MM. > Boards are fitted with full span batons to prevent movement.
> In two sections for ease of handling.
> Timber deck - 32mm thick.
Cost : £ 55.81

PK OF 10 SINGLE PRONG ANGLED HOOK TOOLHOLDER. LXDIA 75X6MM. > Zinc plated
> Can be located at any position where holes appear.
> Securely located by a plastic clip.
> Quickly and easily repositioned when necessary.
Cost : £ 8.34

350MM PULL FILING CRADLE > Slim side wall upright allows full width of the shelf to be accessed.
> All units supplied with 6 shelves.
> Slim profile shelf allows maximum use of the unit height.
> Shelves are adjustable on 25mm increments allowing full flexibility in shel
Cost : £ 119.32

FOLDING TABLE INFANT/PRE-SCHL L1520XW610XH546MM SAXON OAK > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 222.08

FLAT DECK TRAILER PNEU WHEELS 2000X1000X527MM. Basic Specification - Flat Deck Trailer
> Timber deck.
> fully welded chassis - constructed from tubular steel and angle sections.
> Ball bearing turntable steering.
> Tubular 'A' frame towing bar with 100mm diameter tow-ring.
> Towing bar
Cost : £ 612.18

PERFECT TABLE TYPE 4274 With half closed back. H720mm.
Cost : £ 175.08

FOLDING TABLE JUNIOR/PRIMARY L1220XW685XH635MM GREY LINEN > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 203.28

Self-Service Food Merchandiser > Chrome shelves.
> Illuminated interior.
> LED temperature display and thermostat.
> Load: 30 Watts.
HxWxD: 590x750x500mm. Ambient Unit
Cost : £ 821.33

METRIC DEEP OFFSET RING SPANNER 10X11MM X 193MM LGTH >Manufactured to DIN 838 specification.
>Ring end cranked at 15 degrees.
>Ring ends have 12 corners with special radius design giving added torque.
Cost : £ 5.23

PK OF 2 YELLOW LONG KNOBS 40MM DIA. M10 THREAD SHANK. QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 18.8

SEMI RIGID WELSH SIGN 400X300 > Available in self-adhesive vinyl or 1mm thick PVC.
Cost : £ 18.21

STANDARD BENCH WITH LINO WORK SURFACE LXW 1500X600MM FEATURES OF RANGE:
Workbenches
? Sturdy heavy duty framework benches.
? Full range of cupboard and drawer accessories (see facing page). Can be installed on left or righthand side benches.
? Standard height 840mm (750 or 900mm avaialbe on requ
Cost : £ 396.03

METRIC OPEN ENDED SPANNER 20X22MM X 235MM LENGTH Open ends set at 15 degree
Cost : £ 4.94

"REVERSIBLE RATCHET 1/2"" DRIVE X 255MM LENGTH" >manufactured from Chrome vanadium steel in accordance with Din 3122 and ISO 3315.
>Fine tooth ratchet.
>Forward/reverse selector.
Cost : £ 22.33

GARAGE TROLLEY JACK 2TONNE Manufactured to BSAU154a Specification.
Heavy duty design with integral American-style release mechanism and two-piece handle. Fitted with heavy duty rear swivelling castor wheels and large saddle to aid positioning under the vehicle. The jack incorpor
Cost : £ 89.52

PAINT STIRRER 613 X103MM Ideal for stirring paint using a power tool. Stirring end should be fully immersed in paint before use. Shaft diameter 7mm hexagon. Overall length 613mm. Sold loose. --
Cost : £ 4.89

200KG TRANSMISSION CRADLE For use with Draper Trolley Jack Stock No.37174. Carton packed.
Specification:
Load (max.) ... 200kg
Width ... 430mm
Length (min.) ... 267mm
Length (max.) ... 375mm
Height ... 350mm
Saddle tilt ... 30-10°
Weight ... 13.
Cost : £ 40.7

"UPRIGHT 99"" HIGH - 14G ANGLE" ">Pierced every 1"""
Cost : £ 13.63

MOUNTED GRINDING POINT SET Rotary grinding stones suitable for use on most metals. Comprising five assorted shapes and abrasive types. Manufactured from aluminium oxide. Maximum running speeds working 7000-8000 rpm. Shank diameter 1/8“. Display packed. --
Cost : £ 3.04

PK 200 KRAFT ECONOPOST BAGS. INT SIZE 100X165MM. 1-2PKS > Maximum performance - minimum weight - reduce postal costs.
> Air bubbles protect contents yet keep parcel light.
> Scuff and tear resistant.
> Specially treated to improve stamp and label adhesion.
> Double laminate top for greater security
Cost : £ 19.98

18V COMBI C/LESS DRILL-2BATT Features:
• Expert Quality
• hammer drilling facility
• variable speed control
• 21 position torque control
• quality 13mm keyless chuck
• electric brake
• reversing facility
• anti-sl
Cost : £ 352.91

CARBON STEEL LAWN RAKE Sixteen flexible round steel tines with epoxy coated finish. Head securely fixed to tubular steel handle. With black plastic hand grip with hang hole. Sold loose. --
Cost : £ 7.21

RUBBER CASTOR PLATE-75MM DIA Swivel plate fixing. Non-marking tyres. Sold in polybag with label. --
Cost : £ 2.89

K30 SERIES PLATE FIXING Swivel & Brake --
Cost : £ 99.29

200 GOLDSCREWS C/SUNK 5.0X45 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Deep cut 40° lubricated angle threads for fast driving especially in chipboard and MDF. Case and through hardened to prevent snapping. 25° point requires no pre-drilling. Yel
Cost : £ 3.14

PACK OF 10 PYGMY LAMPS. 15WATT SES FITTING > 240v.
> Bayonet cap (BC) or Small Edison Screw type (SES) fittings.
> Colour: clear.
> Supplied in packs of 10.
Cost : £ 8.34

INT. VEHICLE FLEXIDOOR HXW 5200X1000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 237.35

CUPBOARD WITH LOUVRE PANEL & 54 BINS >Euro cupboards fitted with various bin options.
>Bin colours:
No. 2 green
No. 3 blue
No. 4 red
>Available in shelf or louvre panel cupboard options.
>Model K comes complete with 4 drawer unit.
Drawer combination; 3 x 90mm and 1 x 40m
Cost : £ 702.83

3/8 X 1/2 LARGE BOW SHACKLE SWL 9 CWT - SCREW PIN --
Cost : £ 10.46

END MOULDING FOR RUBBER WALL BUMPER > Easy to fix to walls and around concrete or steel columns and bollards.
> A pre-drilled stainless steel strip runs through the middle of the profile. Holes are set at 75mm centres to provide a choice of fixing points.
> Mitre to fit into internal
Cost : £ 5.76

200 GOLDSCREWS C/SUNK 4.0X16 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Deep cut 40° lubricated angle threads for fast driving especially in chipboard and MDF. Case and through hardened to prevent snapping. 25° point requires no pre-drilling. Yel
Cost : £ 1.1

CHUBBY RAT.S/DRIVER W/-6 BITS Chrome molybdenum blade with 1/4“ bit holder and ratchet for forward/reverse and lock. The set is supplied with six 8660 alloy steel 1/4“ bits x 25mm long. The bits supplied are stored in the handle. The triangular-shaped plastic handle has non-
Cost : £ 4.74

14 TREAD HEAVY DUTY PLATFORM STEPS. O/A HT 4.08M > Aluminium heavy duty mobile work platforms ideal for warehousing and storage environments.
> Fitted with large platform (600x480mm) and toeboards on three sides 150mm high.
> For extra loading capacity also fitted with bottom shelf 900x650mm.
>
Cost : £ 916.5

ADJUSTABLE WRENCH - LENGTH 115MM - OPENING 13MM >The rack gear of the mobile jaw is never visible.
>Spanner specially designed for electricians
Cost : £ 25.85

"4 SHELF H.D EXTENSION BAY - SHELF DTH 18"" - OPEN ALL ROUND" > Four and six shelves.
> Standard or heavy duty.
> Choice of 3 shelf depths.
> Initial Bay and Add-on bays.
> Supplied with black plastic feet.
> Standard HxW: 72x36.
Cost : £ 122.61

1000 DRY WALL SCREWS 3.5 X 60 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
For fast fixing of plasterboard to light steel or wood studs without the need to pre-drill. Piercing point-type with twin threads and bugle head allowing setting to the correct depth w
Cost : £ 11.21

Swivel + brake K90 SERIES EXPANDING PLUG FITTING
Cost : £ 14.69

TWO PART ALUMINIUM PUSH-UP LADDER - EXTENDED LENGTH 10M > Push-up trade range certified to EN 131 (BS 2037 Class 2).
> Suitable for all types of trade work.
> Rigid box section stiles.
> Large D-shaped rungs for comfort.
> Moulded feet for non-slip grip.
Cost : £ 244.4

AUTO FOLDING HAND WHEEL. DIA. 125MM X 14MM BORE. QTY 6+ Advantages:
>Limits the risks of accidents due to handle rotation and other obstructions.
>This is a security hand wheel because the handle automatically folds in at the point which is not to be exceeded.
>Part made from polyamide 6 engineered pl
Cost : £ 86.36

PPE (Personal Protection Equipment) Awareness Posters > A range of exclusive posters designed to remind employees of the value of wearing personal protective equipment. Don't Be a Slowcoach!
Cost : £ 22.91

COLD CHISEL 19X200MM BULK Octagonal shank chisel from selected steel with polished cutting edge. Sold loose. --
Cost : £ 2.68

PACK OF 25 RED A4 SUSPENSION FILES > An international suspension file in A4.
> Glued metal suspension bars.
> Flexible plastic tab 5 cm.
> Tabs and inserts are included.
> Packed per 25 in a box.
Cost : £ 9.99

BATTERY BOOSTER CABLES Suitable for 12V cars and light commercial vehicles. 10mm² copper cable fitted with fully insulated clips. Display packed in resealable PVC bag. --
Cost : £ 9.94

LOW MELT GLUE STICKS - 5KG (APPROX 250 STICKS) > Lower application temperature.
> Reduces wear and tear on tools and reduces the risk of thermal burns.
> Detachable safety stand.
> Blister packed.
> Fitted with plug.
> 5kg packs of low melt glue sticks available (approx. 250 sticks).
Cost : £ 51.52

Maintenance Signs >1mm thick rigid PVC material.
>Supplied with 2 pre-drilled holes for easy fixings. Comply with the relevant UK and EC legislation.
Cost : £ 8.34

WORKBENCH WITH LOWER SHELF. STEEL SURFACE 1800X900MM. > Heavy duty 16swg steel bounded to 18mm MDF with turned down and welded corners.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Stan
Cost : £ 509.19

RED ACRYLIC INTERNAL/EXTERNAL INDUSTRIAL MIRROR 800MM DIA. Acrylic
> Impact and shatterproof.
> No glass shards in the event of a breakage.
> Greater reflectability than glass.
> Unaffected by ultra violet light.
> Suitable for internal and external applications where there is little risk of fire.<
Cost : £ 242.05

Pull-out filing cradle > Pull out accessories supplied with ball bearing slides.
> Supplied with instructions and fixings.
> Cradle will accept suspension files front on.
> Fitted with cross bar divider.
> Pull-out accessory. Complete accessory range for use in con
Cost : £ 63.1

K170 SERIES SINGLE HOLE FIXING --
Cost : £ 39.36

PACK 12 BIC WHITEBOARD ROUND POINT MARKERS - BLACK Round Point
> Odourless due to the alcohol base> Round writing point with 2.5mm line width.

Chiselled Point
> Odourless due to the alcohol base. Chiselled writing point with 3.0 - 5.5mm line width.

Medium Point
> Ink on ketone base.
Cost : £ 8.81

100 SELF-TAPPERS PANHEAD 1X10 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Zinc plated. Packed in boxes of 100 (approx.) screws.
*Pozi/Supadriv are registered trademarks of European Industrial Services Ltd. --
Cost : £ 1.28

HAND CRANKED HOSE REEL - HXWXD 520X480X500MM - ID/OD: 10/19MM > Designed for industrial applications
where longer lengths of hose are
required.
> Oil-lite self-lubricating bearings.
> Constructed in black heavy duty
powder coated steel.
> Full flow 90? swivel assembly ensures
maximum product del
Cost : £ 149.23

FOLDING TROLLEY. CAP 150LTR O/A HXWXD 760X460X760MM > Easy maintenance and manoeuvrability under load.
> Lightweight tubular construction with Nutex finish.
> Supplied with 4 swivel castors.
Cost : £ 110.45

5000KG CAP LOWLINE CRANE JIB. FORK SPREAD 492MM > Instant drive-in fitting by one man.
> Positive fixing behind fork heels. Fitt
Cost : £ 934.13

NY.WHEEL CASTOR-PLATE 40MM DIA Swivel plate fixing. Internal use only on furniture etc. Sold in polybag with label. --
Cost : £ 0.43

OFFICE TABLE. HXDXW 740X730X 1200MM - BEECH > General purpose office table.
> HxD: 740x730mm.
Cost : £ 78.73

SIM-PAL CARTON CENTRES. QTY 5+ PKS. HXWXL 120X180X180MM. > Sturdy - manufactured from tough red plastic.
> Easy to apply - self-adhesive.
> Centre supports available for larger cases.
> Dimensions
HxWxL:
120x180x180mm.
> Supplied in
packs of 32.
Cost : £ 41.13

EXTRA SHELF LEVEL. 915X450MM GREY > Extra shelf levels for medium duty PDQ shelving.
Cost : £ 20.15

SHARPENING STONE AND BOX Comprising Stock No.65737 Sharpening Stone with fine and medium sharpening surfaces and Stock No.29520 impact resistant Sharpening Stone Box. Display packed. --
Cost : £ 6.47

PACK 2 50MM PROVENCE KNOBS C/W M8 THREADED SHANK. 6+ PACKS Can also be used in through hole version as the closure cap can be removed. Excellent impact resistance thanks to its polyamide composition reinforced with 30% glass fibre.
Cost : £ 3.7

PACKHAM SEAT - 1800MM LONG WITH ARMS. GROUND FIXING > Timber slats 110x95mm.
> Front and rear timbers are each splayed towards central slat to create slightly dished seating surface for extra comfort.
> Black plastic coated frames.
> Timber colour: light mahogany. Other shades available upon req
Cost : £ 643.9

AUTO FOLDING HAND WHEEL. DIA 80MM X 8MM BORE. QTY 6+ Advantages:
>Limits the risks of accidents due to handle rotation and other obstructions.
>This is a security hand wheel because the handle automatically folds in at the point which is not to be exceeded.
>Part made from polyamide 6 engineered pl
Cost : £ 76.38

PACK OF 10 WASTE MESH BASKETS. BLACK > Polypropylene.
> Solid base.
> Hxdia: 300x314mm.
> Capacity: 16 litres.
> Pack of 10.
Cost : £ 21.8

M22S EYE/EYE STRAINING SCREW (16MM DIA ROPE) > Wire rope manufactured to current British Standards.
> Test certificate can be issued to show sample breaking strain.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 58.75

FLAT DECK TRAILER SOLID WHEELS 1525X760X500MM. Basic Specification - Flat Deck Trailer
> Timber deck.
> fully welded chassis - constructed from tubular steel and angle sections.
> Ball bearing turntable steering.
> Tubular 'A' frame towing bar with 100mm diameter tow-ring.
> Towing bar
Cost : £ 517.0

G. PURPOSE OFFICE SHELVING. 1980X915X305MM. GREY/GREY > Seven level bay; each level comprises 4 steel support beams and a 15mm thick high density chipboard shelf.
> 915mm wide bay - shelf capacity: 205kg UDL; bay capacity: 1580kg UDL;
> 1220mm wide bay - shelf capacity: 182kg UDL; bay capacity: 1580kg
Cost : £ 122.2

Satellite Hooded Bin Fixing Kits
Cost : £ 8.23

NOVUS ECONGRAPH F1 JOINTING. 1.5MM THICK. SHEET SIZE 1 X 1M >A pure exfoliated expanded graphite jointing complete with stainless steel (SS316) foil insert for improved handling characteristics.
>Manufactured to a high standard of quality and purity and can be supplied with certification for total confidence.Cost : £ 95.18

ALUMINIUM HAND WHEEL WITH TWO SPOKES. DIA 200MM >Hand wheel with two spokes.
>Aluminium. Hub with central hole.
Cost : £ 33.49

Sandwich Toaster > Non-stick hot plates.
> Cuts bread and seals sandwiches.
> Easy to clean.
> Ready to use inidcator.
> 800W.
Cost : £ 19.98

METRIC COMBINATION SPANNER 21MM X 275MM LENGTH >Ring end cranked at 15 degrees
Ring ends have 12 corners with special radius design giving added torque.
>Open end ste at 15 degrees.
>Manufactured to DIN 3113 specification.
Cost : £ 6.7

ZEST CANTILEVER WORKSTATION. 720X1600X800MM. BEECH > Zest is an extremely strong and functional range of office furniture.
> Grey or black steel frames support 25mm MFC tops with matching 3mm ABS edging. Please specify. Grey supplied as standard.
> Cable management available as optional extra. Co
Cost : £ 189.18

COUNTER WATER DISPENSER HOT/ COLD HXWXD 445X305X425MM > C/w taps for cup filling.
> Chill rate: 4 litres/hour (suitable for up to 30 people).
> Floor standing models have in-built water filter.
Hot and Cold
Cost : £ 1052.8

EAR DEFENDERS FOR CLIPTITE HELMET - PER 10 Visors
> Supplied complete with carrier for fitting to helmet.
> Aluminium rim for added strength and shape retention.
> Polycarbonate - for resistance to particle impact. Kitemarked and tested to EN 166. B.3.9.
> Acetate - for protection agai
Cost : £ 112.8

ADJUSTABLE WORK TABLE 350 > Available in 4 sizes.
> Adjustable to 4 different angles.
> Compatible with matching heat sealer.
Cost : £ 88.71

GLACIER BOTTLE COOLER. HOT/COLD > Available cold/ambient or hot/cold.
> Cold water chilled to 10 degrees centrigrade and hot to 85 degrees centrigrade.
> Unit comes with refillable 19ltr polycarbonate water bottle.
> Fill either with tap or mineral water.
> HxW: 910 x 275mm.
Cost : £ 350.21

500MM CABINET STACKING KIT. > Shelf: adjustable shelf available to give extra storage facility.
> Top tool tray: 25mm high top perimeter safe edge with fully welded corners.
> Protective mat: 3mm ribbed rubber mat which can be used in conjunction with top tool tray or by itsel
Cost : £ 15.1

Wall Ashbox > Disposes of cigarette butts in a clean manner. Ashbox designed to fit onto a wall.
Cost : £ 52.93

LEATHER TOOL WALLET. HXWXD 45X317X178MM. TAN. Type A
> Compact leather tool wallet with zip closure and space for up to nine tools.
Type B
> Leather tool wallet with zip closure and flat carrying handle.
> Wallet incorporates elasticated loops to support twelve small tools and press-studd
Cost : £ 66.39

WHITE TRANSPORT CONTAINER. HXWXL 225X600X400MM. CAP 40L > External hand grips to prevent contamination of contents.
> Completely flat base - suitable for use on conveyers.
> Colour as indicated below.
Please specify. Blue will be supplied as standard
> See below for dolly to suit.
Cost : £ 18.8

8.0MM BALL END HEXAGON KEY Hexagon keys with ball end on the long arm and conventional ends on short arm. The ball type hexagon tip allows the hexagon key to be used up to 30° angle from the screwhead recess. Chrome vanadium steel hardened and tempered. Sold loose. --
Cost : £ 1.96

VISTA BIN HXWXD 200X305X455MM >Designed for bulk storage and individual item picking.
>Strongly constructed from galvanised steel.
>Reinforced rim.
>Stackable.
>Fitted with half-lift handles and card holders.
Cost : £ 17.45

200 BRASS TRAD.S/SCREW 1/2X3 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws. --
Cost : £ 1.73

HARDWOOD TOP KNOCK DOWN BENCH. WXD 1500X700MM Shares many of the same features as facing page and will accept any of the individual cabinets below to meet individual requirements.
? Two types of worktop available: 30mm MDF core with hardwood or
lino top surface.
? Optional raised metal edge
Cost : £ 474.58

ENGINE/ GEARBOX SUPPORT 500KG Allows work to be carried out on front wheel drive/transmission/drive shafts with engine suspended in-situ. Adjustable extension arms with locking feature. Neoprene support pads and adjustable screws. Carton packed.
Specification:
Capacity ..
Cost : £ 71.44

UNROLLING DEVICE 1000MM > Available in 4 sizes.
Cost : £ 220.9

"UPRIGHT 99"" HIGH - 12G ANGLE" ">Pierced every 1"""
Cost : £ 15.75

STANDARD FELT NOTICE BOARD. SINGLE DOOR 900X600MM. GREY > Single Door.
> Tamperproof notice boards designed to protect displayed information.
> Standard felt notice boards accept velcro as well as pins and are colour fast to BS1006.
Cost : £ 106.93

'OCTO' ADJ. WORKBENCH. BIRCH VENEER. 2000X900MM - BLUE >Working height adjustable between 700-950mm.
>System allows for easy adjustment to the desired height.
>Large 40mm thick work surface in a choice of finish.
>Epoxy paint finish.
>Colours: blue/silver or graphite/silver.
>Supplied flat pack
Cost : £ 374.94

PK OF 2 BLUE LONG KNOBS. 35MM DIA. M8 THREAD INSERT QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 14.1

18M BRICK LINE ON SPOOL Spool containing brick line (approximate length 18M). Display packed. --
Cost : £ 1.62

200 BRASS R/HD S/SCREW 3/8X4 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws.
--
Cost : £ 1.75

K105 SERIES PLATE FIXING --
Cost : £ 63.45

SET OF 5 RED MARKER CONES. 457MM HIGH > Plastic with weighted bases.
> Grooved top to support lath or cane.
> 457mm high.
Cost : £ 23.15

PK OF 2 BLACK LONG KNOBS 35MM DIA M8 INSERT THREAD.QTY1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 6.7

SAW BLADE TCT 140X20MMX16T Quality tungsten carbide tipped (T.C.T) blades hardened and strengthened to ensure a long life. Display packed. Unit of Sale: 1 blade. --
Cost : £ 13.84

EXTRA FOR ENDS/SIDES FOR REFS. 156 & 157W002N > Trucks with friction plate turntables are suitable for most purposes.
> Choice of solid rubber or pneumatic tyres.
> `T' shaped drawbar fitted as standard.
> Chassis framework powder coated blue.
> Platform height from ground:
410mm with
Cost : £ 202.1

115MM DIAMOND MORTAR RAKE BLDE --
Cost : £ 50.82

CROSS DIVIDERS BOTT SERIES 55 DRAWER DIVISION ACCESSORIES
Cost : £ 1.53

Mat Trolley > Tubular steel construction.
> Fixed sides.
> Built-in pulling handle.
> Central divider for mat support.
> Fitted with four 100mm diameter non-marking rubber tyred castors.
> Capacity: 12 x 2m x 1m x 25mm.
Cost : £ 291.4

BLUE PLASTIC FLOOR SQUEEGEE - SIZE 450MM >Heavy-duty plastic frame floor squeegee with 100% rubber mousse double blade.
Cost : £ 8.7

EXTRA COST FOR DOUBLE DOORS > Instant permanent or temporary secure storage building.
> Simple and rapid assembly procedure requiring only two people and a spanner.
> Manufactured entirely from steel to offer total security and ultimate strength.
> Delivered flat packed for
Cost : £ 144.53

ORANGE TRIPLE SCREEN WELDING STRIPS > Strong tube construction and finished in grey enamel.
> All screens can be supplied with welding curtains or strips.
> Strips are fastened to the screen by plastic suspension system.
> Plastic suspension hooks supplied for fastening the welding
Cost : £ 504.08

BLACK COAT STAND C/W 20 HOOKS > Strong steel frame with heavy feet.
> Aluminium hooks.
> HxWxD: 1800x700x700mm.
> Capacity: 30 garments.
Cost : £ 129.78

PACK 12 BIC WHITEBOARD MEDIUM POINT MARKERS - BLUE Round Point
> Odourless due to the alcohol base> Round writing point with 2.5mm line width.

Chiselled Point
> Odourless due to the alcohol base. Chiselled writing point with 3.0 - 5.5mm line width.

Medium Point
> Ink on ketone base.
Cost : £ 6.4

15 DRAWER CABINET. HXW 940X920 DRAWER DEPTH 390MM - GREY/GREY >Manufactured form 1 and 1.2mm steel sheet.
>Seam and spot welded.
>Each drawer supplied with self-adhesive label holder.
>Overall Cabinet depth
drawer depth 190mm = cabinet depth 270mmm.
drawer depth 290mm = cabinet depth 370mmm.
drawer
Cost : £ 432.52

LID TO SUIT REF 166S085N. > Lids to suit Hexagonal Bins range.
Cost : £ 18.8

"RUBBER TYRED WHEEL. CAST IRON CENTRE. BORE 1 1/4"". DIA 350MM" --
Cost : £ 179.78

Drum Tilter > Load capacity: 250kg.
> Manual lever operation.
> Single harness with spring loaded catch supports drum securely in vertical and horizontal positions.
> Fitted with lifting eye and fork guides.
> Maximum forks WxD: 150x60mm.
> LxWxH: 643x
Cost : £ 440.63

PACK OF 10 DOUBLE PLASTIC FEET Provide floor protection when angle used as upright
Cost : £ 9.22

SET OF 100 ROUND PUSH-ON END PIECES.30MM TUBE DIA.QTY:5+ Push-on end pieces with black plastic edges
Cost : £ 9.05

WET/DRY PICK UP VAC. 240V CAP 23/19LTR. 2 MOTOR PLASTIC > Canister style cleaner manufactured from a non-rusting 304 grade mirror finish stainless steel or resilient moulded plastic.
> Ref. 236K011N has pivoting handle to allow tip action emptying of cannister.
> All vacuums supplied with 10m cable (fitt
Cost : £ 508.66

230V COMPRESSOR FRAME100LT 3HP Air receiver CE Approved.
Features:
• 2.2kW (3HP)
• Low amp operates from 13A supply
• High output
• Belt driven
• Twin outlet regulator/filter
• Available with or without lifting frame with wheels


Cost : £ 1244.89

K154 SERIES Ball type furniture castors VARIOUS FIXINGS --
Cost : £ 22.33

G. PURPOSE OFFICE SHELVING 1980X1220X610MM. BLUE/GREY > Seven level bay; each level comprises 4 steel support beams and a 15mm thick high density chipboard shelf.
> 915mm wide bay - shelf capacity: 205kg UDL; bay capacity: 1580kg UDL;
> 1220mm wide bay - shelf capacity: 182kg UDL; bay capacity: 1580kg
Cost : £ 176.25

STANDARD DUTY HYGIMAT. ROLL LXW 5M X 900MM - TERRACOTTA Resilient to oils and fats. Flame retardant to DIN 4102. A choice of standard or heavy duty loose lay mats.
Cost : £ 307.85

3/8''BORE HOSE TAILPC/ADAP. Integral adaptor/tailpieces. Sold loose. --
Cost : £ 0.83

UNI-PAC BOOK BOXES. 240X180X50MM - PER 50. > Self-adhesive strip for easy sealing.
> Maximum depth of contents 50mm.
> Easy to assemble.
> Available in 5 sizes.
Cost : £ 43.42

STACKING WORK PAN - HXWXD 230X455X305MM > Choice of Stacking or nesting pans.
> Spot welded galvanised steel.
> Reinforced rim.
> Half-lift handles.
> Capacity: 25kg.
Cost : £ 15.57

SPRAY HEAD > 1.5m dip tube with cone adaptor to suit all bottle neck sizes. A practical and quality range of window cleaning equipment. WINDOW CLEANING EQUIPMENT
Cost : £ 10.22

PNEUMATIC TYRED POLYPROP.WHEEL DIA 395MM. ROLLER BEARING --
Cost : £ 32.9

CUT/WHEEL-STONE.180X3.0X22.2MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade C30-S-BF 80 medium hard. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 1.28

PK OF 2 WHITE LONG KNOBS 45MM DIA. M10 THREAD INSERT. QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 26.44

BLACK FLUTED ANTI-FATIGUE MAT LXW 1500X900MM > Ribbed surface prevents slipping.
> Ideal for heavy applications.
> Thickness: 11mm.
> Colour: black.
Cost : £ 95.76

200MM FLAT FILE-BASTARD (12) Manufactured in accordance with BS498:1990
Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 21.07

SPARE TYRE/TUBE FOR PNEUMATIC TYRED WHEEL REF 3190V --
Cost : £ 19.98

PK 5 ISOFLEX COVERS - WXD 1000X600MM > A choice of shelf covers.
> Hardboard covers for dry storage.
> Isoflex covers for storage of liquids. Made of polypropylene.
> Tubular metal shelves.
Cost : £ 25.85

DOUBLE SIDED FOAM. 25MM X 33M THICKNESS 1MM. >High performance transparent double sided foam.
>Ideal for applications where coloured tape cannot be used.
USAGE:
>Fixing of transparent materials such as glass or plastic. All applications requiring transparent assembly.
CHARACTERISTICS:
Cost : £ 107.51

5 ROLLS SMALL BUBBLE ROLL WXL 300MM X 100M > Small bubbles are more versatile.
> Transparent.
> Heat sealable.
> Bubble size 10mm.
> Premium bubble flim offers a greater puncture resistance for odd shaped items as well as retaining air over a long period of time.
Cost : £ 37.01

SET OF 100 RECTANGULAR PUSH-ON END PIECES.50X30MM. Rectangular push-on end pieces with black plastic edges.
Cost : £ 21.74

SWIVEL ELEMENT FOR CPU HOLDER > External or internal printer shelf. WxD: 670x430mm.
Fits on the outside or inside of workstation leg frame.
> CPU holder. Adjustable in size to accommodate various CPUs. Lock and swivel element also available. Supplied in silver.
Cost : £ 68.15

ROUND METAL PAPER BIN. CAP 15L BLACK > Steel body with galvanized steel bottom and lip.
> Hxdia.: 330x270mm.
> Capacity: 15 litres.
Cost : £ 7.23

DECORATERS FLEXIBLE FILLER310M Ideal for filling cracks and gaps prior to painting. Can be painted and re-painted. Can be used in Draper Caulking Guns Stock Nos. 32339 & 58247 and other manufacturers similar guns. Sold loose. --
Cost : £ 1.1

110V BLOWER EXTRACTOR FAN COMPLETE WITH 5M HOSE > Welded sheet steel body with wire mesh grilles at each end.
> Refs. 118 and 119B030 - small units designed for light applications.
> Refs. 120 and 121B030 - designed for use in heavy industrial plants. Supplied with 5m hose.
> Optional extra -
Cost : £ 843.65

SINGLE FLANGED CAST IRON WHEEL WHEEL DIA 133MM -PLAIN BEARING --
Cost : £ 60.51

DRAWER BIN. LXWXH 400X117X90MM DOVE-BLUE > The solution for storage in shelves.
> High mechanical resistance.
> Safe stacking.
> Delivered with large label.
> Colour: dove-blue.
Cost : £ 3.94

EXTRA CHAIN PER METRE. 13MM DIA 3 LEG > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 74.61

TABLE TENNIS PRACTICE BAT > Choice of practice or club range.
> Combine strength with cost effectiveness.
> 5 ply blade.
Cost : £ 2.64

Hydraulic Presses > High quality range of hydraulic floor presses for all industrial applications.
> All welded steel construction.
> Single speed pump on 20 tonne model. Two speed pump on all models from 25 tonne to 100 tonne capacity.
> Vee-blocks supplied as st
Cost : £ 2143.2

INERTIA BALANCERS 1 - 2KG CAPACITY >An economical range of inertia balancers available in two types - spring actuated or air operated.
>Will accomodate tools weighing from 0.5kg to a massive 24kg.
>Used in their simplest form the balancers can be suspended from any convenient locatio
Cost : £ 41.13

BRASS INTERNAL DOOR KNOB Polished brass plated for use on internal doors where no locking facility is required. Fits door thicknesses of 35 to 50mm. Supplied complete with template and fixings. Display packed. --
Cost : £ 6.78

P/FORMED LAMINATE BENCH AND SHELF. LXW 1200X750MM. > 1.3mm laminate on 18mm MDF with post-formed edge.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Standard height: 840mm.
> Bench
Cost : £ 416.19

HD ANVIL TELESCOPIC LOPPERS Blades hardened and tempered with one “Teflon-S“ coated for smooth corrosion-free operation. High leverage telescopic tubular handles with soft grips. Handles extend from 440 to 760mm using a simple twist and lock action. Display packed. --
Cost : £ 16.27

4 DRAWER DESK HEIGHT PEDESTAL WXDXH 420X800X720MM. BEECH TOP > WxH: 420x720mm.
> Available in two depths: 600 or 800mm.
> Made from one piece lacquered sheet steel in graphite grey.
> Supplied complete with pen tray in the top drawer.
> Central locking.
> Floor level adjusters.
> 25mm thick tops i
Cost : £ 467.65

3000KG CAP LOWLINE CRANE JIB. EXTENDING JIB > Instant drive-in fitting by one man.
> Positive fixing behind fork heels. Fitt
Cost : £ 934.13

HARDWOOD TIMBER BENCH - HXWXD 840X1500X750MM >18mm plywood optional backboard.
>85x65mm legs.
>Worksurface side rails: 144x28mm.
>Shelf side rails: 88x28mm.
>18mm varnished plywood lower shelf fitted on benches as standard.
>Clear varnish finish.
>Quick release vices fitted on benc
Cost : £ 614.53

100 NYLON LOCK NUT - M5 Zinc plated nylon for corrosion protection.. Supplied in boxes of 100 (approx.) or polybags of 10 (approx.) --
Cost : £ 1.45

WALLMOUNTING HALOGEN LAMP 150W Manufactured to IP44 Specifications
Diecast aluminium body with adjustable mounting bracket. Manufactured to IP44 Specifications suitable for external use. Supplied complete with halogen bulb and fitting instructions. Display carton. --
Cost : £ 5.33

RUBBER CAST.BOLT/BK.-100MM DIA 12mm diameter swivel bolt fixing with brake. Non-marking tyres. Sold in polybag with label. --
Cost : £ 6.15

6 POSITION DESK CLUSTER. MID GREEN WITH OAK FINISH >Innovative desk design leads to great floor space efficiency.
>Dividing shaped top screens provides privacy without isolation.
>Well planned environments encourage higher productivity and efficiency.
>FOC site survey and design survey available
Cost : £ 1731.95

FOLDING TABLE INFANT/PRE-SCHL L1830XW760XH546MM SAXON OAK > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 260.85

GREY ZED TRED 90 MATTING. ROLL LXW 10M X 1M >The mat is supplied with sloped long edges enabling the use of trolleys and other wheeled traffic.
>The cushioned base can be chamfered to form sloped short edges.
>Excellent scuff-resistance of wear layer.
>Channelled slip-resistant surface dis
Cost : £ 578.1

STACKING TRAY. O/A LXW 762X457 32LTR CAP. SOLID SIDES & BASE > Available in three heights.
> All trays interstack with each other.
> O/A LxW: External - 762x457mm.
Internal - 715x412mm.
> Secure cross stacking of trays and lids improves air circulation thereby accelerating product cooling.
> Slide s
Cost : £ 12.93

Hanging Pockets > Red pockets strengthened by a steel wire frame.
> Fastening through metallic hanger.
> Pack of 5.
Cost : £ 11.52

10MM DIA 6 X 19 FMC GALV WIRE ROPE 20M COIL > Wire rope manufactured to current British Standards.
> Test certificate can be issued to show sample breaking strains.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 82.84

HT. EQUALIZER. LOAD 20 TONNE > Skates - cast spheroidal graphite bodies and case hardened steel chain. Use as single or multiple units.

Accessories:
> Turntables - locate on top of skate. Use to control direction of load.
> Height Equalizers - use in conjunction with tur
Cost : £ 31.73

HEXAGONAL KEY HOLDER. HOLDS 10 KEYS. > Zinc plated.
> Can be located any any position where holes appear.
> Securely located by a plastic clip.
> Quickly and easily repositioned when necessary.
Cost : £ 4.0

WORKBENCH ACCESSORIES- SERVICE DUCTS & INSULATORS. 1500MM. > Please remember when ordering accessories rear support legs ref. 2975R035N must also be ordered.
Cost : £ 130.78

SAFETY SIGN S/A 300X400 NO PARKING > Available in self-adhesive vinyl or 1mm thick PVC.
Cost : £ 9.75

PHENOLIC RESIN WHEEL. WHEEL DIA. 125MM --
Cost : £ 25.26

FOLDING TROLLEY. CAP 100L O/A HXWXD 960X390X460MM > Easy maintenance and manoeuvrability under load.
> Lightweight tubular construction with Nutex finish.
> Supplied with 4 swivel castors.
Cost : £ 92.24

PACK 30 VARI-DEPTH CARTONS INT LXW 410X410MM > Grooves cut at set levels to fold carton to desired height.
Cost : £ 32.31

Epoxy Floor Paint/Coverings > Primer - use with top coat for maximum adhesion on smooth non-porous surfaces. Primer
Cost : £ 72.26

FILLA GAP PAPER. WXL 600MMM X 450M. > Imitation kraft paper.
> Made from 100% recycled unbleached fibres.
> Can be dispensed from a counter top roll holder.
> Tears easily from the roll.
> Roll lenght 450m.
>Available in two roll widths.
Cost : £ 26.44

Stainless Steel Wash Units "> 3"" long Whistern lever taps - per pair Taps to suit wash hand basins"
Cost : £ 47.59

1200W LAWN MOWER 360MM Features:
• For medium to large gardens (400M² approx)
• Powerful 1400W - 230V motor
• 380mm cutting width
• Safety switch and safety blade brake
• Foldaway handle
• Rigid grass collection box
Supp
Cost : £ 123.63

1.1/4'' COPPER FACE FOR 20070 Spare faces for Draper Copper/Rawhide Faced Hammers Stock Nos.20070 and 20088. Copper and Rawhide faces 32 and 38mm diameter. Sold loose. --
Cost : £ 3.08

Rear service duct c/w two 13 amp sockets ACCESSORIES / KEYBENCH 456 CANTILEVER RANGE
Cost : £ 120.09

WORK GLOVES POLKA DOT PALM LRG Made from 100% cotton with knitted wrist and polka dot nonslip palm. Display packed. --
Cost : £ 1.29

BLUE ZED TRED 127 MATTING. ROLL LXW 10M X 1M >The mat is supplied with sloped long edges enabling the use of trolleys and other wheeled traffic.
>The cushioned base can be chamfered to form sloped short edges.
>Excellent scuff-resistance of wear layer.
>Channelled slip-resistant surface dis
Cost : £ 658.0

Cylinder Handling Strap > Strong polyester webbing strap and two spring handles.
> Maximum diameter 1100mm.
> Fitted with over centre tensioner
which locks strap on to cylinder.
> Weight: 1.0kg. Designed for use by two persons to assist the safe manual handling of
Cost : £ 62.28

ABRASI.S/DISCS 115MM PCK5 G36 Fibre backed. 22mm bore. Display packed 5 discs per pack. --
Cost : £ 3.37

GREY VINYL WORKSURFACE. WXD 1500X750MM > Range of replacement worksurfaces.
> In many situations a workbench frame remains usable whilst the worksurface has deteriorated and needs replacing or upgrading.
> 2mm grey vinyl bonded onto 18mm MDF with wooden or plastic edges.
Cost : £ 145.7

K30 SERIES PLATE FIXING Swivel & Brake --
Cost : £ 82.25

RUBBE RTYRED WHEEL. CAST IRON CENTRE. BORE 20MM. DIA 125MM --
Cost : £ 47.59

5MM S.S. FOUR LEG CHAIN SLING > Chain hooks c/w safety catch.
> Test certificate supplied with each sling.
> Standard length 1 metre EWL.
Cost : £ 726.15

WORKBENCH WITH LOWER SHELF. VINYL SURFACE. 1800X900MM > 2mm grey vinyl bonded onto 18mm MDF.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Standard height: 840mm.
> Bench HxWxD: 1800x
Cost : £ 447.62

3/8''TAPER X 1/2''HOSE CONNECT 3/8“ thread size with BSP taper. Display packed three tailpieces per card. --
Cost : £ 4.17

FIXINGS WITH TWO THREADED RODS PK OF 5.DEFL.4.0MM QTY: 5+ --
Cost : £ 10.81

S.STEEL GLASTRONORM CONTAINER. TYPE 1/2 - DEPTH 20MM > Manufactured to a high standard using 0.8mm 304 stainless steel.
> No distortion on heating any size.
> No jamming during storage.
> Suitable for any application.
> Perforated containers are used in their own right as containers in a steam
Cost : £ 11.05

980 X 380MM FOAM MAT Ideal for working under vehicles etc. Oil and water-resistant. Packed in polythene bag with label --
Cost : £ 25.3

PACK 5 180MM FLAT/MET CUT DISC Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade A30-S-BF 80 medium hard. Maximum working speed 80m/sec. Packed 5 wheels per display pack. --
Cost : £ 6.6

CLEAR GLASS SCREEN (3 PER CARD CE and BS approved
Injection moulded polypropylene flip action welding helmet. Lens are display packed and sold separately from helmets.
Stock No. 35266 contains 2 lens per pack
Stock Nos. 35267 & 35268 contain 3 lens per pack --
Cost : £ 0.98

DRY/WET PICK UP VAC. CAP. DRY 30 LITRES. 1 MOTOR.- 240 VOLTS > Canister style cleaner manufactured from a non-rusting 304 grade mirror finish stainless steel or resilient moulded plastic.
> Ref. 236K011N has pivoting handle to allow tip action emptying of cannister.
> All vacuums supplied with 10m cable (fitt
Cost : £ 482.4

RUBBER TYRED WHEEL WITH STEEL CENTRE DIA 405MM --
Cost : £ 50.53

PACK OF 2 KEYPANELS. WXH 1000X457MM. - GREEN > This system is based on a range of tough metal panels perforated with a regular pattern of square holes.
> A wide variety of steel tools and parts holding accessories can be located at any position on the panelwork.
> Each accessory is designed to
Cost : £ 49.23

HAND HELD WELD.MASK W/0 LENSES CE and BS approved
Injection moulded polypropylene hand-held welding mask. Lens are display packed and sold separately from masks.
Stock No. 35266 contains 2 lens per pack
Stock Nos. 35267 & 35268 contain 3 lens per pack --
Cost : £ 5.52

OPEN FRONTED LETTERBOARD - HXW 910X634MM - GREEN > Grooved felt covered board with gold colour trim for attractive appearance.
> Changeable letters simply push inand pull out.
> Covered in quality felt for long lasting good looks.
> Attractive curved and mitred in gold finish.
> Supplied wit
Cost : £ 193.88

13MM GEARED CHUCK 1/2 X 20 For use with Draper Expert Rotary and Hammer Drills. Display packed. --
Cost : £ 12.93

BALANCE BENCH. LENGTH 1830MM > Manufactured from hardwood.
> Varnished finish.
> Non-slip feet.
Cost : £ 235.06

PERFORATED PANEL - GREY > Cupboards require three panels.
> Supplied complete with fixings and finished in RAL 7001 grey.

Ref. 2302B074N
> 20 piece assorted hook kit for door inners and perforated back panel.

Ref. 2304B074N
> 23 piece hook on bin kit for u
Cost : £ 38.01

Grit pad brush for ref 138K004N/139K004N AUTOMATIC DISC BRUSHSUCTION SCRUBBER
Cost : £ 350.15

"REVERSIBLE RATCHET 1/4"" DRIVE X 143MM LENGTH" >manufactured from Chrome vanadium steel in accordance with Din 3122 and ISO 3315.
>Fine tooth ratchet.
>Forward/reverse selector.
Cost : £ 12.1

3 POSITION DESK CLUSTER + WORK TOP. MID GRN/OAK FINISH >Innovative desk design leads to great floor space efficiency.
>Dividing shaped top screens provides privacy without isolation.
>Well planned environments encourage higher productivity and efficiency.
>FOC site survey and design survey available
Cost : £ 3313.5

PLASTIC HXWXD 55X72X72MM > Enables the user to choose individual components to produce tailor made fitments for the storage of small components and cylindrical tools.
> Our comprehensive selection of standard drawer divider kits is also listed in the cabinet tables; this provi
Cost : £ 1.29

Distribution Trolleys > Optional extra (factory fitted): runners in top basket to take suspension files (files not supplied). Optional extra
Cost : £ 21.15

STANDARD BENCH WITH LAMINATE WORKSURFACE LXW 1200X750MM FEATURES OF RANGE:
Workbenches
? Sturdy heavy duty framework benches.
? Full range of cupboard and drawer accessories (see facing page). Can be installed on left or righthand side benches.
? Standard height 840mm (750 or 900mm avaialbe on requ
Cost : £ 375.94

Busybase Trio A4 Folding Leaflet Dispenser > Manufactured from silver anodised aluminium. Weights only 5.3kg complete with zippered transit bag.
> Each pocket holds up to 40mm of A4 material.
> Stable base unit and snapframe header panel for personalised greeting or logo.
> Built-in carr
Cost : £ 193.82

PACK OF 10 DUST BAGS TO SUIT REFS 113 TO 116N201 Various dust bags to suit all models
Cost : £ 15.86

In/Out Message Board > To suit Refs. 200 - 202W045N.
> Pack 300. Card Inserts
Cost : £ 9.28

"WOODWORKER VICE JAW WIDTH 9""/230MM" > Grey cast iron body and front plate are precison machined to house two solid steel guide rods giving the vice a smooth true parallel action free of side or cross movement.
> Steel main screw has a two start acme thread for fast accurate adjustment.Cost : £ 169.2

10''X3'' BRASS VIC. LETTER PLA Polished and lacquered with inward opening flap. Size 256 x 78mm. Supplied complete with fixings. Display packed. --
Cost : £ 5.98

200MM FLAT FILE-SECOND (12) Manufactured in accordance with BS498:1990
Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 23.77

MULTI-RASP HALF ROUND BLADE Diecast body with two position adjustable wooden handle. Blade length 255mm. Supplied complete with replaceable high carbon steel blade. Display packed. --
Cost : £ 2.15

PK 100 KRAFT ECONOPOST BAGS. INT 220X265MM 1-2PACKS > Maximum performance - minimum weight - reduce postal costs.
> Air bubbles protect contents yet keep parcel light.
> Scuff and tear resistant.
> Specially treated to improve stamp and label adhesion.
> Double laminate top for greater security
Cost : £ 18.21

9'' IRON BASKET CABINET HANDLE “Basket“ design. Supplied complete with fixings. Carton packed. --
Cost : £ 6.64

K30 SERIES PLATE FIXING Swivel & Brake --
Cost : £ 44.06

ROLL OF S/A 5313 PREFORMED MASTIC. LXW 6M X 8MM. QTY 15+ > Synthetic elastomer based self adhesive preformed mastic.
> Excellent resistance to weathering.
Cost : £ 14.1

BLUE ACOUSTIC DOME. O/A HXWXD 790X740X560MM Glass fibre reinforced plastic domes with black edge trim.
Designed to fit above a payphone or for internal or external installation of wall mounted telephones.
Standard unit.
Cost : £ 325.48

FIXINGS WITH TWO THREADED RODS PK OF 5.DEFL.9.0MM --
Cost : £ 33.49

25 MACHINE SCREWS CSK M6 X 40 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Zinc plated. Packed in polybags of 25 (approx.) screws.
*Pozi/Supadriv are registered trademarks of European Industrial Services Ltd. --
Cost : £ 0.78

200KG CAP EURO TRUCK DIA 200MM HXW 1090X515MM 125kg capacity
> O/A: HxW 965x540mm.
> Back frame curved across width.
> Open toe plate - WxD: 380x200mm.
> 160mm diameter wheels.
>Weight: 10.5kg.

200kg capacity
> O/A: HxW: 1065x540mm.
> Rear frame curved across truck width.<
Cost : £ 122.67

SET OF 56 STORAGE BINS. > Shelf: adjustable shelf available to give extra storage facility.
> Top tool tray: 25mm high top perimeter safe edge with fully welded corners.
> Protective mat: 3mm ribbed rubber mat which can be used in conjunction with top tool tray or by itsel
Cost : £ 168.5

LIGHTWEIGHT FLUORESCENT LAMP INSPECTION LAMPS
Cost : £ 91.06

SET OF 25 'FINNISH' PADLOCKS WITH PASS KEYS The exceptional weather resistance of this padlock lies in the fact that is does not use any springs or pins as it is closed by means of discs.
Angular tooth keys which cannot be reproduced at key cutting outlets ensure against fraudulent copies.
Co
Cost : £ 227.95

FLUORINATED 4 DRUM PALLET WITHOUT DRAIN PLUG. 1-2 OFF 2 Drum Low Profile Pallet

> Load capacity: 2041kg UDL.
> Pallet can be moved fully loaded.
> Low profile enables easy loading and unloading.
> Colour: white.

4 Drum Fluorinated Pallet
> Resistant to most chemicals.
> Transluce
Cost : £ 601.6

20KG THREADED AXLE P.ROLLER. M/S BEARINGS.50MM DIA. L 250MM > Three types: plain hole (axle not supplied); spring loaded stub axle(SL); or threaded axle with nylon nut fixing (NN).
threaded axle M8
Cost : £ 6.58

WHITE MOBILE ACID/ALKALI CABINET. 1200X900X600MM > Strong welded construction from 1.2 swg steel.
> Full safety labelling to BS 5378.
> Reinforced doors with 3 point locking.
> Vents incorporated at high and low level points in doors.
> High capacity adjustable stainless steel shelves preven
Cost : £ 725.45

1500KG PUSH TRAVEL TROLLEY. TRACK WIDTH 210-305MM Travel Trolleys
> Push or hand geared models.
> Track widths from 50mm to 305mm.
> Precision machined runners.
> Maintenance free sealed ball bearings.
> Meets all EU directives.
> Test certificate supplied.
Cost : £ 176.25

10 ROOFING BOLTS M6 X 20 Zinc plated finish supplied with square nut. Packed in polybags of 10 (approx.) bolts. --
Cost : £ 0.25

200MM FARMERS OWN (1) PACKED Manufactured in accordance with BS498:1990
Single cut files to give fine/sharp finish to garden tools. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Self handled with hang hole. Display pac
Cost : £ 2.24

STANDARD DRUM PALLETS. O/A LXWXH 2800X1400X275MM. > Standard pallets or pallets fitted with splash back and sides.
> Manufactured from 2.5mm mild steel sheet.
> Fully welded liquid-tight seams.
> Removable galvanised mesh grid deck.
> Fork pockets - HxW: 80x170mm.
> Finished in chemical an
Cost : £ 847.76

PK 5 HARDBOARD COVERS. WXD 1000X500MM > A choice of shelf covers.
> Hardboard covers for dry storage.
> Isoflex covers for storage of liquids. Made of polypropylene.
> Tubular metal shelves.
Cost : £ 17.04

"CUSHION TYRES & POLYPROP CENTR WHEEL DIA 160MM -BORE 1/2""" --
Cost : £ 7.17

FOLDING TABLE BUFFET/ADULT L1520XW610XH760MM GREY LINEN > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 222.08

8MM H/D STAPLES-(BOX OF 1000) Boxes of heavy duty staples for use with the following Draper Staplers/Tackers:
• Heavy Duty Staple Gun/Tacker Stock No.13951
• Hammer Tacker Stock No. 67984
• Electric Stapler/Nailer Stock No. 69358
Staple thickness 2mm (approx
Cost : £ 1.45

40MM STEEL HINGE (PAIR) Packed in polybag with label. --
Cost : £ 0.34

ALUMINIUM STILED STAGING. WXL 450X2400MM > Manufactured to BS 2037 Class 1.
> Constructed with box section aluminium stiles.
> Fitted with anti-slip decking.
> Timber end caps for added protection.
> 2 widths available.
Cost : £ 105.16

WAVE DESK. 1600X1000X800MM RIGHT HANDED. BEECH > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 229.13

PACK OF 250 OYSTER PAKS. LXWXH 525X385X80MM > Manufactured from high quality rigid corrugated paper with a white mottled outer liner.
> High crush resistance.
> Quick and easy to use.
> Suitable for despatch via parcel post.
Cost : £ 929.9

ANTI-STATIC WORKBENCH - BLACK FIBREBOARD. LXW1500X750MM. Utilises cantilever framework for increased stability. Fully welded construction dissipates build-up. Standing working height: 840mm. Fitted with four adjustable feet. Frame: steel tube and angle section to BS 6323. 14 and 16 swg. Complete with earth gr
Cost : £ 458.9

Tape Dispensers Extensive range of tape dispensers to suit every user's application. Type H 75mm Premium Metal Dispenser With Adjustable Brake
Cost : £ 24.68

K30 SERIES PLATE FIXING Fixed --
Cost : £ 35.25

330MM X 70MM TOOL STORAGE TOTE TRAY Impact-resistant polypropylene with two compartments sized 330 x 70mm for the storage of tools etc. Sold loose.
Dimensions - mm : 398 x 250 x 140
Cost : £ 3.35

PACK 10 STEEL M5 SHORT KNURLED NUTS. --
Cost : £ 5.64

9.5 X 8 ZP DUTCH SNAP HOOK - CAPTIVE EYE > Electro-galvanised mild steel.
> Quick release chain connecting link with a security locking gate.
Cost : £ 5.46

FIXINGS WITH TWO THREADED RODS PK OF 5.DEFL.4.0MM QTY: 5+ --
Cost : £ 15.86

Explosion proof - Wt. 0.5kg Single Tube / GENERAL INSPECTION LAMPS
Cost : £ 492.33

1/2KG ROUND WIRE NAILS 25X1.8 500g or 1 kg (approx.) bags of zinc plated nails. --
Cost : £ 1.28

BISLEY SIDE OPENING TAMBOUR CUPBOARD.HXW 1980X1200. BEIGE > Welded steel body.
> H1000mm: central single point locking mechanism with cylinder lock.
> H1980mm: 3 point locking doors.
> Fire resistant PVC tambour doors with metal end tambour.
> Adjustable shelves with under-rail set at 330mm for later
Cost : £ 533.1

VISTA BIN HXWXD 150X305X610MM >Designed for bulk storage and individual item picking.
>Strongly constructed from galvanised steel.
>Reinforced rim.
>Stackable.
>Fitted with half-lift handles and card holders.
Cost : £ 13.75

42 DRAWER CABINET. HXW 940X920 DRAWER DEPTH 390MM - GREY/RED >Manufactured form 1 and 1.2mm steel sheet.
>Seam and spot welded.
>Each drawer supplied with self-adhesive label holder.
>Overall Cabinet depth
drawer depth 190mm = cabinet depth 270mmm.
drawer depth 290mm = cabinet depth 370mmm.
drawer
Cost : £ 582.15

PACK OF 2 'D' DURACELL PLUS BATTERIES > Alkaline.
> Long life batteries.
> Gold tipped.
Cost : £ 3.94

TRAFFIC FILM REMOVER 5L --
Cost : £ 10.83

MOBILE SINGLE SCISSOR LIFT TABLE. 1250KG CAP - MANUAL > General construction and safety features as detailed on Britruck Scissor Tables specification.
> Lift heights from 840mm to 1050mm.
> Various table top sizes up to 1000mm x 2000mm.
Cost : £ 1639.13

Lane Closure Gate >For use when two lane closure gates are installed opposite each other. Central locking mechanism
Cost : £ 203.28

Heavy Duty Plastic Pump > For 20-210 litre drums and containers.
> Pistonless self-priming pump.
> Constructed with polypropylene and LDPE parts and fitted with Viton U gland seal.
> Dispensing height from drum - 229mm.
> Delivery: 250ml per stroke - discharge on dow
Cost : £ 37.13

ALUMINIUM SAFETY SIGN. 400X300 'EYE PROTECTION MUST BE.... >0.9mm thick coated aluminium with radius corners.
>Pre-drilled fixing holes.
Cost : £ 25.26

CORK BOARD - 600X900MM > Natural cork finish.
> Anodised aluminium framework with PVC rounded corners.
> Available in three formats.
> Invisible fixing points.
> Screws and plugs supplied.
Cost : £ 24.03

STANDARD DRUM PALLETS. O/A LXWXH 1400X1400X275MM. > Standard pallets or pallets fitted with splash back and sides.
> Manufactured from 2.5mm mild steel sheet.
> Fully welded liquid-tight seams.
> Removable galvanised mesh grid deck.
> Fork pockets - HxW: 80x170mm.
> Finished in chemical an
Cost : £ 435.63

EXTENDING CRANE JIB. TRUCK CAP 3000KG. FORK SPREAD 546MM > Instant drive-in fitting by one man.
> Positive fixing behind fork heels. Fitt
Cost : £ 1057.5

PK OF 2 BLUE LONG KNOBS 35MM DIA. M8 THREAD SHANK. QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 15.28

G. PURPOSE OFFICE SHELVING 1980X915X457MM. BROWN/BROWN > Seven level bay; each level comprises 4 steel support beams and a 15mm thick high density chipboard shelf.
> 915mm wide bay - shelf capacity: 205kg UDL; bay capacity: 1580kg UDL;
> 1220mm wide bay - shelf capacity: 182kg UDL; bay capacity: 1580kg
Cost : £ 142.18

SPEARMINT BLU SINGLE UNIT SACK HOLDER WITH LID 695X440X560MM > Mild steel construction.
> Sprung rod frame bag holder.
> Fitted with 50mm diameter swivel castors.
> Pedal operated lid.
> Colour: spearmint blue.
Cost : £ 131.6

12V BULB FOR WORK LIGHT > Industrial strength construction.
> Low voltage halogen lights.
> Available in 12v or 24v.
> High 50W output.

Arm
> Brass & steel construction with PVC covering.
> 700mm length.
> Flex-tube guaranteed for life.
> Bends easily
Cost : £ 7.99

SIMPLE STAINLESS STEEL BIN. HXWXD 500X300X200MM. > Complements the Standard Bin and can be fitted to the Bin Stand to provide general litter control.
Cost : £ 140.82

"2 TIER EDUCATION LOCKER HXWXD 70X12X15"".TWO TONE GREY" School Lockers - available in 2 or 3 tier.
> Each compartment is supplied with an adjustable removable shelf.
> O/A HxWxD: 1778x305x381 mm.

Student Lockers - available in 4 tier.
> Capable of accommodating large school bags.
> O/A HxWx
Cost : £ 133.95

COFFEE/CREAM BISLEY 12 DRAWER CABINET. 940X280X410MM > Welded steel body and drawers.
> Chromium-plated handgrips and cardholders.
> Optional insert trays for optimal versatility.
> Drawers - WxD: 235x380mm.
Cost : £ 179.95

9MM PRINTING TAPES FOR DYMO 3500. BLACK/RED PACK 5. Printing Tape Suitable For Dymo Pocket and Dymo Label Manager 100 Machines
Cost : £ 51.7

DOUBLE SIDED TAPE 18M X 12MM Double sided clear tape suitable for various applications including fixing carpet to floors. Shrink wrapped in singles with label. --
Cost : £ 0.82

6 POSITION DESK CLUSTER. DARK BLUE WITH GREY FINISH >Innovative desk design leads to great floor space efficiency.
>Dividing shaped top screens provides privacy without isolation.
>Well planned environments encourage higher productivity and efficiency.
>FOC site survey and design survey available
Cost : £ 1731.95

MANUALLY OPERATED ROAD BARRIER - BOOM LENGTH 3M > Steel pedestal with aluminium boom.
> Designed to be surface mounted.
> Counter balanced for easy operation.
> Can be padlocked in raised or lowered position for safety and security (padlock supplied).
> Base plates pre-drilled for surface f
Cost : £ 783.73

230/12V DOUBLE INSULATED TRANSFORMER > Industrial strength construction.
> Low voltage halogen lights.
> Available in 12v or 24v.
> High 50W output.

Arm
> Brass & steel construction with PVC covering.
> 700mm length.
> Flex-tube guaranteed for life.
> Bends easily
Cost : £ 38.19

CORK DISPLAY BOARD. 900X1200MM > Aluminium anodized frame with concealed corner fixings.
> Natural cork finish.
> Fittings supplied.
Cost : £ 57.58

K30 SERIES PLATE FIXING Fixed --
Cost : £ 24.09

9 LTR ECONOMY EURO CONTAINER VENT. EXT LXWXH 400X300X120MM > Manufactured from polypropylene.
> 3 Euro sizes for optimum storage on 800x1200 and 1000x1200mm pallets.
> Reinforcement ribs on all sides.
> Suitable for food storage.
> Stable stacking.
> Integral ticket holders.
> Containers higher
Cost : £ 8.46

PEN TRAY FOR STANDARD PEDESTALS > A range of accessories for Freeway Furniture.
Cost : £ 12.93

Swivel + brake K90 SERIES EXPANDING PLUG FITTING
Cost : £ 19.98

STANDARD DUTY LEVER MODEL LOADBINDERS > Lever type - for use with grade 30 chain. Tension achieved by over-centre operation of the bar.
> Ratchet type - for use with grade 80 chain. Tension achieved though ratchet and pawl mechanism giving infinite adjustment.
Cost : £ 22.91

FIXINGS WITH TWO THREADED RODS PK OF 5.DEFL.4.0MM --
Cost : £ 14.1

NO2 C-SLOT IMPACT DRIVER BIT 8mm hexagon shank bits suitable for use with Stock Nos. 81519 and 22322 Impact Screwdriver Sets. Sold loose.
PZ TYPE bits are compatible with *Pozi/Supadriv fixing systems.
“Draper TX-STAR“ bits are compatible with †Torx fixing syste
Cost : £ 1.08

EXTRA/M S.S. CHAIN FOR FOUR LEG SLING - 7MM DIA > Chain hooks c/w safety catch.
> Test certificate supplied with each sling.
> Standard length 1 metre EWL.
Cost : £ 202.1

SET OF 50 'FINNISH' PADLOCKS WITH PASS KEYS The exceptional weather resistance of this padlock lies in the fact that is does not use any springs or pins as it is closed by means of discs.
Angular tooth keys which cannot be reproduced at key cutting outlets ensure against fraudulent copies.
Co
Cost : £ 454.73

ROTARY WIRE CUP BRUSH 40MM
Brassed crimped steel wire with 6mm diameter shank. A useful general purpose cleaning brush. Display packed. --
Cost : £ 2.8

280PC SCREW/WALL PLUG ASST 280 (approx.) popular size plain slot and PZ TYPE screws with plated finish for corrosion protection plus plastic wall plugs. Packed in plastic storage case with label.
Contents:
• Plain slot woodscrews sizes: 3 x 20 to 5 x 38mm (dia. x length
Cost : £ 4.08

Disposable paper bags KEY WET/DRY VACUUMS
Cost : £ 8.7

HIGH TEMP. PHENOLIC M/DUTY CASTOR. 125MM DIA. FIXED > Swivel and fixed types.
> Wheel centre: thermoplastic
> Wheel tyre: none
> Wheel bearing: plain
Cost : £ 27.55

GLASS PAPER ASST 5 SHT 280X230 A general purpose abrasive sheet for use on woodworking applications. Sheet size 280 x 230mm. Five sheets per pack. Display packed.
Contents: 2 x F2; 2 x M2 and 1 x S2 --
Cost : £ 1.14

CAPPS MENS' HIKER - SIZE 12 > Manufactured to EN345
> Rubber nitrile sole.
> Heat resistant to 300 degree C.
> Resistant to oil and solvents.
> Leather uppers.
> 200 joule steel toe cap.
> Size: 6 - 12.
Cost : £ 48.18

8 POSITION CAROUSEL CLUSTER. DARK BLU WITH OAK FINISH >Innovative desk design leads to great floor space efficiency.
>Dividing shaped top screens provides privacy without isolation.
>Well planned environments encourage higher productivity and efficiency.
>FOC site survey and design survey available
Cost : £ 3196.0

21 DRAWER CABINET. HXW 940X920 DRAWER DEPTH 190MM - GREY/RED >Manufactured form 1 and 1.2mm steel sheet.
>Seam and spot welded.
>Each drawer supplied with self-adhesive label holder.
>Overall Cabinet depth
drawer depth 190mm = cabinet depth 270mmm.
drawer depth 290mm = cabinet depth 370mmm.
drawer
Cost : £ 378.47

1/4'' HOSE TAILPIECE/COUPLING For use with standard adaptors. Positive lock single action ideally suited for most compressed air applications. Maximum airflow rate 1197L/min (42cfm) at 6.9bar (100 psi). Maximum working pressure 13.8bar (200psi). Display packed. --
Cost : £ 8.1

M6T EYE/EYE STRAINING SCREW (3MM DIA ROPE) > Wire rope manufactured to current British Standards.
> Test certificate can be issued to show sample breaking strain.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 9.52

ALUMINIUM FRAMED BENCH LXD 1500X600MM > Range of high quality stainless steel benches and tables for environments requiring high standards of cleanliness and hygiene.
> Standard working height: 830mm. 900mm working height available on request.
> Worktop: 1.5mm thick Grade 304 stainless
Cost : £ 482.81

DRAIN PLUG KEY 3/8'' SQUARE Chrome vanadium steel hardened and tempered. For use with 3/8“ square drive accessories. Display packed.
Vehicle Applications:
Honda: Gearbox & Sump; Mazda: Back Axle & Gearbox
Renault: Gearbox & Sump; Saab: Gearbox
Volvo: B
Cost : £ 1.54

FOLDING TABLE BUFFET/ADULT L1830XW610XH760MM AILSA GREY > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 250.28

OMAS 2.5KW ELECTRIC OIL FILLED RADIATOR. HXWXD 735X635X210MM > Adjustable thermostat control.
> Power selector.
> Practical cable holder.
> Swivel wheels.
> Antifreeze device.
> Available with or without 24hr timer.
Cost : £ 133.95

PDQ STANDARD BENCH WITH LOWER SHELF. 915X1800X900MM. > Full width 18mm chipboard worksurfaces.
> 300kg undistributed working load for worktop.
> Complete with metal footplates and full assembly instructions.
> Supplied flat packed for self-assembly.
> Additional lower shelf allows large storage
Cost : £ 132.66

INT. VEHICLE FLEXIDOOR HXW 2800X4000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 565.18

POLYESTER/COTTON TARPAULIN LXW 7.3 X 5.5 METRES > Heavy duty flat sheets fitted with rope ties and shortening tabs.
> Mildrew resistant.
> Tear resistant.
Cost : £ 354.85

POLY. FLOOR STAND FOR SIX CYLINDERS. LOAD CAP 545KG > Will accept 80 to 250mm diameter cylinders.
> Fitted with individual retention strap for each cylinder.
> Easy to manoeuvre and reposition.

2 Cylinder Stand
> Load capacity: 180kg.
> HxWxD: 760x710x310mm.

6 Cylinder Stand
>
Cost : £ 448.67

WHITE PACKING FOAM. ROLL LXW 200M X 500MM (PER 3). 5+ PKS > Dust and lint free.
> Water resistant and non-abrasive.
> Choice of standard white foam or heavy duty
blue with extra thick ribbing.
Cost : £ 66.98

TYPE B - ZINC WIRE SINGLE BAS- KET. WXDXH 475X450X300MM. > Constructed from welded steel wire.
> Provide all round identification of contents.
> Freestanding - designed to stack firmly one on top of the other.
> Self stacking - no bolts required.
> Full depth wire dividers.
> Finish: Bright zinc.
Cost : £ 24.09

RADIO S/DRIVER DISPLAY STAND Moulded plastic counter display holding 60 plain slot radio screwdrivers with coloured plastic handles. Assorted blades lengths 35 to 75mm. Shrink wrapped outer carton. --
Cost : £ 11.08

THREADED BUSH FOR SQUARE TUBE 40X40X1.5MM - M12 THREAD > Made from hard polyamide with integrated brass bush.
> Bush for square tube.
Cost : £ 4.05

13MM 6X19 FMC 3 LEG WIRE ROPE SLING 2M EWL > 6 x 19 construction wire rope to British standards.
> Strops with eye each end.
> Slings supplied as standard with safety hook. shackle can be fitted at extra cost.
> Stamped with serial number and WLL.
> Safety factor 5 to 1.
> Test cert
Cost : £ 102.46

600MM BOLT CUTTER-SPARE JAWS Suitable for cutting high tensile material up to 40HRc. Jaws hardened and tempered to HRc58-62 to give long life and good cutting capability. Centre cut jaw pattern. Plastic grips on handles. Spare jaws available. Sold loose. --
Cost : £ 16.73

STANDARD BENCH WITH LAMINATE WORKSURFACE LXW 1500X600MM FEATURES OF RANGE:
Workbenches
? Sturdy heavy duty framework benches.
? Full range of cupboard and drawer accessories (see facing page). Can be installed on left or righthand side benches.
? Standard height 840mm (750 or 900mm avaialbe on requ
Cost : £ 373.42

50ML BOTTLE RETAINING ADHESIVE >Anaerobic resin. >Viscosity: 2000 - 3000 mPas.
>Colour: Fluorescent green.
>Cure time: 5 - 10 minutes.
>Final strength: 12 hours.
>Shear strength (pin-ring): 22 - 40 MPa. >Maximum gap: 0.25 mm. >Prolonged peak temper
ature: +150?C.Cost : £ 29.96

1.83M EXTENSION UNIT TO SUIT REF. 359E004. GALVANISED > Instant permanent or temporary secure storage building.
> Simple and rapid assembly procedure requiring only two people and a spanner.
> Manufactured entirely from steel to offer total security and ultimate strength.
> Delivered flat packed for
Cost : £ 321.95

HUBS FOR HIGH SPEED WHEELS BALL BEARING --
Cost : £ 25.85

Master Padlocks - Blank key > Resistant to cutting and sawing.
> Dual lever action independently locks both shackle legs.
> 5 pin tumbler precision locking mechanism.
> Vinyl bumper around base to protect equipment.
> Standard and long shackle models.
> Blank key for
Cost : £ 7.76

AUTO RANGING MULTIMETER > 3200 count LCD display with bar graph. Automatic polarity and zero.
> DC volt: (auto) 0.320mv/3.2/32/320/600v ? 1.2%.
> AC volt: (auto) 0.320mv/3.2/32/320/600v ? 2.0%.
> DC current: 0.320 A/3.2/32/200mA ? 2% 10A ? 3%.
> AC current: 0.320 A/
Cost : £ 87.54

METAL FLOORSTAND. > Range of dispensers to suit Refs. 179/180S073A.
Cost : £ 27.61

INT. VEHICLE FLEXIDOOR HXW 5200X4000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 888.3

ALUMINIUM ROTARY HANDLE. DIA X L 32 X 97MM. --
Cost : £ 16.45

OPEN FRONTED LETTERBOARD - HXW 1220X910MM - BROWN > Grooved felt covered board with gold colour trim for attractive appearance.
> Changeable letters simply push inand pull out.
> Covered in quality felt for long lasting good looks.
> Attractive curved and mitred in gold finish.
> Supplied wit
Cost : £ 423.0

ENGINE/ GEARBOX SUPPORT 300KG Allows work to be carried out on front wheel drive/transmission/drive shafts with engine suspended in-situ. Adjustable extension arms with locking feature. Neoprene support pads and adjustable screw. Carton packed.
Specification:
Capacity ...
Cost : £ 63.3

DRAWER INSERT C/W 24 COMPARTMENTS.DRAWER HGT 75MM > This range of accessories is designed to enhance the efficiency of the 438 x 438 mm sized drawers used in all Bott Series 55 products.
> Select from 3 types of accessory sets. For individual components select from range offered at foot of page.
>
Cost : £ 39.89

250MM SOLID BRASS PULL HANDLE Ideal door pull handles. Supplied complete with fixings. Display packed. --
Cost : £ 8.32

50M COIL 10MM S.S. WIRE ROPE - 7X19 CONST > Manufactured from high grade stainless steel to AISI 316 standards.
> 1x19 Wire Rope - rigid construction. Suitable for basic rigging.
> 7x19 Wire Rope - flexible construction. Suitable for various applications.
> Slings - thimble eye or soft e
Cost : £ 535.8

OFFICE TABLE. HXDXW 740X730X 1200MM - GREY ASH > General purpose office table.
> HxD: 740x730mm.
Cost : £ 78.73

HARDWOOD TIMBER BENCH - HXWXD 840X1200X750MM >18mm plywood optional backboard.
>85x65mm legs.
>Worksurface side rails: 144x28mm.
>Shelf side rails: 88x28mm.
>18mm varnished plywood lower shelf fitted on benches as standard.
>Clear varnish finish.
>Quick release vices fitted on benc
Cost : £ 501.73

SELF ADHESIVE CORRUGATED PAPER ROLL WXL 450MM X 100M > 100% recyclable.
> Absorbs impact and secures
contents during transit.
> No need for tape or staples.
> Supplied in packs of 200.
Cost : £ 64.63

25 MACHINE SCREW PANHEAD M5X12 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Zinc plated. Packed in polybags of 25 (approx.) screws.
*Pozi/Supadriv are registered trademarks of European Industrial Services Ltd. --
Cost : £ 0.36

'Taktyle' Braille Signs >Manufactured and moulded matt finish plastic to prevent reflection.
>Patented locating ring - guides the hand to the centre where the information can be easily found.
>Smooth contour lettering and pictograms.
>Self adhesive backing for instant f
Cost : £ 24.09

CUT/WHEEL-STONE.115X2.5X22.2MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade C30-S-BF 80 medium hard. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 0.88

COACH BOLT M8 X 100 (100) Carbon steel hardened and tempered with hexagon nut. Plated finish. Packed in boxes of 50 or 100 (approx.) bolts. --
Cost : £ 14.37

THERMOSTAT - 20 TO 120 DEGREES SETTING. TO SUIT HEATER MATS. >Mats should be controlled by a seperate thermostat. See Refs.115/116J041N both with 1.5m stainless steel capillary wire and bulb with protective covering.
Cost : £ 121.38

CARBON BALL TRANSFER UNIT. BALL DIA 19MM. CAP 23KG >A simple and inexpensive method of moving many types of load.
>Load is supported through the centre of unit.
>Unique anti-friction devices provide instant directional change.
>Ball units consist of a large ball seated on a number of smaller ball
Cost : £ 5.58

36 ROLLS LOW NOISE POYPROYLENE TAPE. BROWN > Instant adhesion.
> Roll WxL: 50mm x 66m.
> Colour: brown or clear.
Cost : £ 34.66

14.4V COMBI-PLUS C/LESS-2 BATT Features:
• Expert Quality
• auto spindle lock for easy bit change
• hammer drilling facility
• variable speed control
• 21 position torque control
• quality 13mm keyless chuck
• electric brak
Cost : £ 291.24

"RUBBER TYRED WHEEL. CAST IRON CENTRE - DIA 300MM - BORE 1""" --
Cost : £ 97.53

DRAWER INSERT C/W 32 COMPARTMENTS.DRAWER HGT 100MM > This range of accessories is designed to enhance the efficiency of the 438 x 438 mm sized drawers used in all Bott Series 55 products.
> Select from 3 types of accessory sets. For individual components select from range offered at foot of page.
>
Cost : £ 31.78

12V 1 HR CHARGER 230V To charge the batteries used in the Draper Cordless Drills. 230V AC Charging time 1 hour (approx.). Display packed. --
Cost : £ 24.97

3 DIVIDER POSITIONS - EQUALLY SPACED Range of Optional Extras to suit Tote Pans
Cost : £ 3.58

PK 5 HARDBOARD COVERS. WXD 1250X500MM > A choice of shelf covers.
> Hardboard covers for dry storage.
> Isoflex covers for storage of liquids. Made of polypropylene.
> Tubular metal shelves.
Cost : £ 18.8

FIXED BRUSH LANCE (PW3000) --
Cost : £ 43.4

PACK OF 10 PYGMY LAMPS. 15WATT BC FITTING > 240v.
> Bayonet cap (BC) or Small Edison Screw type (SES) fittings.
> Colour: clear.
> Supplied in packs of 10.
Cost : £ 8.34

12VDC FLUORESCENT INP LAMP For use in places where mains power is unavailable. Supplied with 3M (approx.) of cable and connector for car cigarette lighter socket. Has useful hang-up hook. Supplied complete with 280mm (11“) fluorescent tube. Display packed. --
Cost : £ 6.32

1KG ROUND WIRE NAILS 75X3.75 500g or 1 kg (approx.) bags of zinc plated nails. --
Cost : £ 1.45

A4 TIER TO SUIT REFERENCE 110B195A. > Flexible to suit individual requirements.
> Carousel stand can take up to four tiers. However if an A4 tier is being used then only 3 tiers in total can be fitted to the stand.
> Carousel stand; powder coated 2 piece pole with matching plastic ba
Cost : £ 49.35

13MM DIA 6 X 19 FMC UNGALV WIRE ROPE 20M COIL > Wire rope manufactured to current British Standards.
> Test certificate can be issued to show sample breaking strains.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 119.85

WORKBENCH - WXD 1500X750MM STEEL SURFACE. > Heavy duty 16swg steel bounded to 18mm MDF with turned down and welded corners.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Stan
Cost : £ 341.98

POWER TOOL KIT (CONTAINING ASST. TOOLHOLDERS) > A quick and easy way to order a mixed selection of toolholders.
> Our specially selected kits have been designed to meet a range of standard usages.
> The kits offer a wide range of mixed holders chosen from the range.

General Purpose Kit c
Cost : £ 36.13

Regulatory Notices >Printed on semi-rigid PVC For employers to display in the workplace to make staff aware of regulations which directly affect their occupation.
Cost : £ 32.9

INTERNAL DISPLAY CASE WITH CORK BACK. HXWXD 650X500X39MM > Cork back.
> Anodised aluminium framework.
> Glazed frame door. Lock on the front side.
> Available in 3 formats.
Cost : £ 90.95

PHENOLIC RESIN WHEEL. WHEEL DIA 100MM. BORE 12MM --
Cost : £ 16.45

SCUTCH HOLDING CHISEL200MMPCKD An octagonal shank chisel with recessed end to accept toothed or plain edge scutches. Supplied complete with one replaceable comb scutch. Display packed. --
Cost : £ 9.02

2-PART ALUMINIUM COMBINATION LADDER. EXTENDED HT 4.04M > Manufactured to EN131 standard.
> Heavy duty aluminium combination ladders for industrial and trade applications.
> Wide base for extra stability with slip resistant square rungs.alloy castings
> Automatically lock extension section when in use
Cost : £ 117.5

CUT/WHEEL-METAL.230X2.0X22.2MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade A30-S-BF 80 medium hard. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 2.49

150MM ROUND FILE-SECOND (12) Manufactured in accordance with BS498:1990
Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 19.61

ALUMINIUM SAFETY SIGN. 230X172 'FIRE ACTION' >0.9mm thick coated aluminium with radius corners.
>Pre-drilled fixing holes.
Cost : £ 13.51

PACK OF 10 SINGLE PRONG TOOL HOLDERS. LENGTH X DIA 25X6MM > Zinc plated
> Can be located at any position where holes appear.
> Securely located by a plastic clip.
> Quickly and easily repositioned when necessary.
Cost : £ 6.29

FLUSH MOUNTING HANDLE. KEYED DIFFERENTLY. Designed for metal cabinets. Can be used on panel thickness of 0.8 - 1.2 mm due to its clip-on system. Supplied with 2 keys and a 2 point cam.
Varied combinations
Cost : £ 11.05

1.83M EXTENSION UNIT TO SUIT REF. 357E004. GALVANISED > Instant permanent or temporary secure storage building.
> Simple and rapid assembly procedure requiring only two people and a spanner.
> Manufactured entirely from steel to offer total security and ultimate strength.
> Delivered flat packed for
Cost : £ 307.85

PACK OF 100 OYSTER PACKS LXWXH 426X261X55MM. PER 100 > Manufactured from high quality rigid corrugated paper with a white mottled
outer liner.
> Budget range of die-cut boxes with soft profiled pads included.
> Supplied assembled with a cleverly designed closure.
> 7 useful sizes available?
>
Cost : £ 185.77

PLATFORM - LXW 1800X600MM > Aluminium framed with slip resistant working surface.
> Aluminium hook ended.
Note: Handrails and toe boards are mandatory for platform heights over 2 metres.
Cost : £ 307.85

100 SET SCREWS - M6 X 50 Manufactured to DIN558
Zinc plated for corrosion protection. Packed in boxes of 50 or 100 (approx.) screws. --
Cost : £ 3.34

METRIC COMBINATION SPANNER 30MM X 380MM LENGTH >Ring end cranked at 15 degrees
Ring ends have 12 corners with special radius design giving added torque.
>Open end ste at 15 degrees.
>Manufactured to DIN 3113 specification.
Cost : £ 13.51

INITIAL BAY OPEN MISTRAL SHELVING.WXHXD 1000X2230X300MM > Slim side wall upright allows full width of the shelf to be accessed.
> All units supplied with 6 shelves.
> Slim profile shelf allows maximum use of the unit height.
> Shelves are adjustable on 25mm increments allowing full flexibility in shel
Cost : £ 133.89

COACH BOLT M6 X 50 (100) Carbon steel hardened and tempered with hexagon nut. Plated finish. Packed in boxes of 50 or 100 (approx.) bolts. --
Cost : £ 5.16

3 DRAWER TOOL CHEST. HXWXD 300X540X215MM 3 Drawer Tool Chest:
>Drop down flap front for extra security.
>Removable tote tray.
>Drawer WxDxH: 479x187x55mm.

4 & 6 Drawer Roller Cabinet:
>75mm swivel castors.
>Lockable tetaining bar.
>Drawer WxD: 470x315mm.
>4 Drawer H:
Cost : £ 110.16

SPARE TYRE/TUBE FOR PNEUMATIC STEEL WHEEL. REF 3254V --
Cost : £ 113.98

POWDER COATED TRAY CLEARING TROLLEY. HXWXD 1490X518X426MM > Manufactured from 25mm round tube.
> Fitted with 100mm diameter castors.
> Accept trays: 457x346mm.
> Special size trolleys can be made to suit any tray size. Contact our customer call centre for further details.
> Available in a choice of f
Cost : £ 264.38

EXTENSION WING (1) FOR BTS251 VDE no-volt switch
This saw provides a high quality extruded aluminium working surface with a depth of cut of 76mm at 90° and 63mm at 45° is ideally suited to the DIY enthusiast or small workshop. Fitted with a front and rear locking rip fenc
Cost : £ 33.46

450MM HIGH FULL TOOL PANEL - BENCH LENGTH 1200MM Range of accessories that can be added to the 456 medium duty workbenches to suit specific requirements.

N.B. Long rear support posts required when ordering top fluorescent light or shelf. Short rear support posts required when orderin
Cost : £ 109.39

WORKBENCH - 800MM Portable workbench with dual clamping action and 24 holes for work clamping dogs. Folds flat for secure storage. Two-piece MDF worktop with printed protractor. Sturdy legs manufactured from robust 1.2mm box section steel. Maximum clamping width with dogs
Cost : £ 50.63

2-PART ALUMINIUM COMBINATION LADDER. EXTENDED HT 4.60M > Manufactured to EN131 standard.
> Heavy duty aluminium combination ladders for industrial and trade applications.
> Wide base for extra stability with slip resistant square rungs.alloy castings
> Automatically lock extension section when in use
Cost : £ 138.65

WORKBENCH WITH LOWER SHELF. LINO SURFACE. 1500X750MM > 2mm lino on 18mm MDF with a wooden edge.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Standard height: 840mm.
> Bench HxWxD: 1
Cost : £ 456.43

SQUARE CONTAINER. CAP 151.5LTR HXWXD 595X545X730MM. GREY Containers
> Tapered body with rounded corners and smooth contours for easy cleaning.
> Integral handles that interlock when containers are positioned side-by-side.
> Snap-on lid - optional extra.
> Colour: Grey
Dolly
>Tough one-piece po
Cost : £ 57.58

GM. DRIVESHAFT CIRCLIP TOOL For the removal and/or replacement of circlips on driveshafts of GM (Vauxhall/Opel) vehicles allowing the CV joint to be dismantled. The tool can also be used as a standard circlip tool. Pressed steel chemically blacked body with alloy knurled turning kno
Cost : £ 6.23

500W HAL/LAMP/TELESCOPIC 110V Manufactured to IP44 Specification
110V 500W halogen lamp on sturdy telescopic stand. The lamp has diecast aluminium body with adjustable mounting bracket. Tripod base can be adjusted as can the overall height from 1.1M (approx.) to a maximum of 2M (ap
Cost : £ 37.29

NYLON POLYURETHANE TYRE SWIVEL CASTOR. DIA 200MM - PLAIN Fixing holes: to suit 10mm diameter bolts.
Cost : £ 45.24

GLASS FRONTED CUPBOARD - GREY ASH > Constructed from 18mm
counter-balanced foil board.
> Supplied flat packed for easy
self-assembly.
Glass Fronted Cupboard.
> 4mm wide sliding glass doors. Glass toughened to BS 6206A.
> Fixed centre shelf.

Low Cupboard.
>Adjus
Cost : £ 146.88

assortment of cams IP65 SEALED AND TRIANGLE LOCKS / IP65 sealed locks
Cost : £ 1.76

G. PURPOSE OFFICE SHELVING 1980X1220X305MM. BLUE/GREY > Seven level bay; each level comprises 4 steel support beams and a 15mm thick high density chipboard shelf.
> 915mm wide bay - shelf capacity: 205kg UDL; bay capacity: 1580kg UDL;
> 1220mm wide bay - shelf capacity: 182kg UDL; bay capacity: 1580kg
Cost : £ 138.65

PK OF 2 BLACK LONG KNOBS 30MM DIA. M8 INSERT THREAD. QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 9.52

SERIES 290 - K TYPE - CABINET C/W 12 DRAWERS. O/A HxWxD: 290x310x180mm
Cost : £ 25.26

'ROMEO' HANDLE. WIDTH 20MM. 112MM - QTY 6+ >Handle made from AlMg Si 0.5 oval aluminium section with matt anodised surface. Maximum tensile force greater than 80kg.
Cost : £ 17.63

STAINLESS BALL TRANSFER UNIT. BALL DIA 22MM. CAP 120KG >A simple and inexpensive method of moving many types of load.
>Load is supported through the centre of unit.
>Unique anti-friction devices provide instant directional change.
>Ball units consist of a large ball seated on a number of smaller ball
Cost : £ 14.69

BRAD NAIL 20MM For use with Draper Nailer or Combination Nailer/Stapler and other manufacturers similar machines.
Sold in boxes. --
Cost : £ 4.7

YELLOW GRIP ALUMINIUM HANDLE. SIZE 1360MM >Plain aluminium handle with colour coded hand grip.
Cost : £ 5.93

DELUXE HEAVY DUTY GARDEN TABLE DIA 980MM. WHITE > Table dia: 980mm.
> Parasol supplied in white and red stripes.
> Table colour: white.
Cost : £ 74.03

COMPLETE HYDRAULIC PUMP & HANDLE ASSEMBLY. 25MM DIA > Refs. 769/770A003N - specify if 25 or 30mm dia required.
Cost : £ 368.95

SPARE CHUCK GUARD 55MM These telescopic chuck guards give protection from quill to drill point allowing a smooth telescopic action as the drill the penetrates the workpiece. The outer slotted visor can also be set in a locked position. The guards listed are ideal for most drill
Cost : £ 28.55

Metal Skirt > Metal skirt designed to hang freely from the boom and folds as boom is lifted to the vertical position.
> White GRP with every third drop in powder coated aluminium for
extra strength.
> Skirt drop: 700mm.

N.B. Factory fitted to boom at
Cost : £ 35.25

'ROMEO' HANDLE. WIDTH 20MM. 100MM >Handle made from AlMg Si 0.5 oval aluminium section with matt anodised surface. Maximum tensile force greater than 80kg.
Cost : £ 18.21

2 X ROLLS WAXED KRAFT PAPER. ROLL 900MMX100M > Roll size WxL: 900mmx100m.
> Paper grade: 55 gsm.
> Supplied in packs of 2 rolls.
Cost : £ 23.68

HIGH LIFT-JACK CAPACITY 3000KG LIFT HEIGHT 1465MM (5') > Capacity: 3 Tonnes.
> Quick and easy operation.
> Manufactured from high grade alloy castings.
> Steel pillar reversible for longer wear.
> Adjustable top clamp head.
> Shear pin for overload protection (load does not drop on shearing).Cost : £ 85.78

Chafing Set >Stainless Steel
>Includes full 1/1 gastro container and 2 fuel holders.
>Spare fuel sold seperatly.
Cost : £ 55.23

3-PART ALUMINIUM COMBINATION LADDER. EXTENDED HT 6.02M > Manufactured to EN131 standard.
> Heavy duty aluminium combination ladders for industrial and trade applications.
> Wide base for extra stability with slip resistant square rungs.alloy castings
> Automatically lock extension section when in use
Cost : £ 219.73

WINDOW WASHER BLADE For removal of liquid from windows etc. Neoprene rubber blade. Display packed. --
Cost : £ 2.7