HYDRAULIC FLOOR PRESS 10 TONNE and more Business Equipment and Supplies

Business Equipment and Supplies at Key Solutions

Pages : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10

HYDRAULIC FLOOR PRESS 10 TONNE For use in the garage and workshop. Hydraulic gauge included. Carton packed.
Specification:
Capacity ... 10 tonnes
Ram stroke ... 190mm
Height - ram to table ... 918mm (max.)
... 0mm (min.)
Table aperture ... 90mm
Working tabl
Cost : £ 384.28

K25 SERIES PLATE FIXING --
Cost : £ 146.88

PACK 10 STEEL M12 KNURLED NUTS --
Cost : £ 69.33

Swivel K90 SERIES EXPANDING PLUG FITTING
Cost : £ 17.63

CUSHION TYRED WHEEL WITH STEEL CENTRE -WHEEL DIA 330MM-ROLLER --
Cost : £ 38.78

PORTABLE SECURE STORAGE UNIT 3.66X3.73X1.83M. GALVANISED > Instant permanent or temporary secure storage building.
> Simple and rapid assembly procedure requiring only two people and a spanner.
> Manufactured entirely from steel to offer total security and ultimate strength.
> Delivered flat packed for
Cost : £ 1172.65

178MM SANDING DISCS G80 PCK 5 Fibre backed. 22mm bore. Display packed 5 discs per pack. --
Cost : £ 5.28

TEMPERATURE PROBE (DMM8 ONLY) Specification shown in ‘Digital Multimeters‘ Table. Display packed.
*Sold loose. --
Cost : £ 5.41

Glass Tape Dispensers > Accommodates tape up to a maximum outer diameter of 127mm.
> Colour: Blue. Self-enclosed metal tape dispenser with heavy duty blade especially designed to cut through reinforced glass tape. The tape is neatly encased around the `two-part? constructi
Cost : £ 6.82

1 SHELF OPEN FRONTED STORAGE CUPBOARD 800X454X730MM. BEECH > Beech finish.
> 25mm worktop with 2mm protective edge apart from ref. 153C047 which has 3mm edge.
Cost : £ 85.19

LID TO SUIT REF 167S085N > Lids to suit Hexagonal Bins range.
Cost : £ 18.8

TABLE TENNIS CLUB BAT > Choice of practice or club range.
> Combine strength with cost effectiveness.
> 5 ply blade.
Cost : £ 13.69

TECHBOOK - FAULT CODES Comprehensive coverage for the professional and home mechanic. Shrink wrapped for security. Sold loose. --
Cost : £ 15.75

33PC.SECURITY BIT SET A security bit set and holder comprising a selection of 1/4“ insert security bit types generally available on the market. The “Draper TX-STAR“ and hexagonal bits have a hole drilled in the bit to take the pin of the security fixing. The ins
Cost : £ 6.78

WEYLUX BENCH STANDING SCALES - 25KG X 5G CAPACITY > Mains powered LED display.
> Dual reading kg/lb.
> Zero key to balance containers and facilitate recipe weighing.
> Visual overload warning.
> Platform WxD: 380x430mm.
> Height: 770mm.
Cost : £ 897.7

BANQUET CHAIR - BLACK FRAME - JUNIPER > Available in a choice of fabric as shown. Please specify. Clipper will be supplied as
standard.
> Frame: black or chrome. Please specify. Black supplied as standard.
> Seat width x Seat depth x O/A height x seat height:
458x560x900x490mm.
Cost : £ 76.02

BRASS DOUBLE MALE CONNECTOR Display packed. --
Cost : £ 1.45

PK OF 2 YELLOW LONG KNOBS.25MM DIA. M4 THREAD INSERT QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 10.81

R.HAND ARCA COMPACT DESK. ALUMINIUM/BEECH > Desktops are 25mm thick with shock absorbing ABS edging.
> Central support beam with cable management capacity.
> Metallic legs in aluminium epoxy lacquered steel.
> Desk height: 720mm. Floor level adjustment for easy levelling.

Desk wi
Cost : £ 315.25

GARMENT DISPOSAL LOCKER. 1800X300X450. GREY/PLUM > Allows dirty laundry to be deposited through top flap directly into a laundry bag (supplied by laundry operator) suspended inside main compartment.
> Lockable main compartment door provides security with quick and easy access to laundry bag.
> Fla
Cost : £ 104.58

200 GOLDSCREWS C/SUNK 3.5X16 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Deep cut 40° lubricated angle threads for fast driving especially in chipboard and MDF. Case and through hardened to prevent snapping. 25° point requires no pre-drilling. Yel
Cost : £ 0.8

DISPENSER C/W 24 CHUBBY S/D Chrome molybdenum blade with 1/4“ bit holder and ratchet for forward/reverse and lock. The set is supplied with six 8660 alloy steel 1/4“ bits x 25mm long. The triangular-shaped plastic handle has non-slip grips for maximum torque and user comfo
Cost : £ 113.93

GALVANISED FINISH WALL FIXING STORAGE RACK. WXD 550X120MM > Paint or Galvanised finish.
> Drilled for wall fixing.
> Retaining chains fitted as standard.
> Units available fitted with security bar incorporting padlock facility (padlock not supplied).
Cost : £ 52.29

MMA KIT FOR INV140 For use with all Draper Inverter/Welders. Sold loose.
* Kit also supplied complete with Stock No. 69389 --
Cost : £ 44.73

Industrial Air Tools "> Side handle for easy control.
> Speed RPM: 1100.
> Ideal for cleaning castings and smoothing welds.
> Supplied with governor mechanism.
> Average CFM requirement at 50% duty cycle: 8.0. Grinders and Sanders - 4"" Angle Grinder"
Cost : £ 109.28

PACK OF 2000 SEMI-OPEN HAND SEALS. 12X25MM - QTY 1-4 > Available as semi-open or closed seals.
Cost : £ 17.04

H.D ROPE OPERATED PROFESSIONAL LADDER. LENGTH CLOSED 5.5M > Exceeds the Dielectric Strength Specifications for ANSI A14.5-2000 by 30%
> Aluminium D-shape rungs and channel section stiles.
> Rope-operated mechanism.
> Articulated safety feet act as rubbers on smooth surfaces.
> When folded feet fasten
Cost : £ 534.33

PROFESSIONAL PAINT BRUSH 50MM PACK OF 5 > Expert quality.
> Dense full length pure bristle with taper cut ends.
> Stainless steel ferrule.
> Painted hardwood handle.
> Display packed.
> Available in 8 widths.
Cost : £ 19.39

TWO PART ALUMINIUM PUSH-UP LADDER -EXTENDED LENGTH 7.2M > Push-up trade range certified to EN 131 (BS 2037 Class 2).
> Suitable for all types of trade work.
> Rigid box section stiles.
> Large D-shaped rungs for comfort.
> Moulded feet for non-slip grip.
Cost : £ 146.88

WORKBENCH WITH LOWER SHELF. LAMINATE SURFACE. 1200X900MM > 1mm laminate on 18mm MDF with a wooden edge.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Standard height: 840mm.
> Bench HxWx
Cost : £ 383.46

1/4'' UNION NUT ¼“ BSP. Sold loose. --
Cost : £ 0.65

20 ASSORTED TOOLHOLDERS. A Cupboard housing and doors.
> Manufactured in heavy gauge steel and finished in chip resistant epoxy paint.
> Colour: blue/grey.
> Fully lockable doors with three point espagnolette locking mechanism with integral lock.
> All doors have inte
Cost : £ 19.98

CARBON BALL TRANSFER UNIT. BALL DIA 50MM. CAP 333KG >A simple and inexpensive method of moving many types of load.
>Load is supported through the centre of unit.
>Unique anti-friction devices provide instant directional change.
>Ball units consist of a large ball seated on a number of smaller ball
Cost : £ 49.94

AIR OPERATED PUMP C/W NITRILE SEALS & UPTAKE TUBE > Manufactured from polypropylene with acetal piston. Seals as indicated below.
> Air regulator valve controls flow rate. Trickle feed tap allows for positive dispensing.
> Fitted with air pressure regulator for safe working. Max./min. air pressure
Cost : £ 159.8

Hand Brushes > Heavy duty dust pan.
> Colour: brown.
> Width: 310 mm Heavy Duty Plastic Dust Pan
Cost : £ 4.99

BRASS THREE WAY CONNECTOR Display packed. --
Cost : £ 4.17

Keyboard Manager "> Stores keyboard out of sight and saves desk space.
> Smooth tray glides for easy movement.
> Metal casing holds 15"" monitors up to 23kg (50lb).
> Tray for pens etc. included.
> Colour: platinum grey. Standard desktop Keyboard Manager"
Cost : £ 30.55

6MM H/D STAPLES-(BOX OF 1000) Boxes of heavy duty staples for use with the following Draper Staplers/Tackers:
• Heavy Duty Staple Gun/Tacker Stock No.13951
• Hammer Tacker Stock No. 67984
• Electric Stapler/Nailer Stock No. 69358
Staple thickness 2mm (approx
Cost : £ 1.28

NON-MAGNETIC WHITE DRYBOARD. HXW 2400X1200MM > Aluminium soft line finish with grey synthetic corner pieces.
> Fixings and pen tray supplied.
> Provided with a melamine writing surface and can be used with markers listed.
Cost : £ 246.75

DRAWER INSERT C/W 44 COMPARTMENTS.DRAWER HGT 100MM > This range of accessories is designed to enhance the efficiency of the 438 x 438 mm sized drawers used in all Bott Series 55 products.
> Select from 3 types of accessory sets. For individual components select from range offered at foot of page.
>
Cost : £ 31.78

BRICK LINE 1X18M APPROX PCKD One hank (approximate length 18M) packed on display card. --
Cost : £ 0.86

WALLBANDS. HEIGHT 1276MM PAIRS- WHITE > Shelf brackets simply slot into wallbands to give easily adjustable shelves.
> Fixing kits: wallbar kit; 10 screws and wallplugs. Shelf kit; screws for five brackets.
> Bracket load capacities are evenly distributed loads (not point loads).
Cost : £ 21.15

CAST ALUMINIUM FIXED FLOOR TOLL FOR DRY PICK-UP VAC > 610mm wide bolt-on cast aluminium fixed floor tool for 2 motor models on caddy.
> Dump valve fitted to canister for quick and easy emptying of fluids without removal of motor head.
> Black plastic coated wire tool basket suitable for models on cad
Cost : £ 141.0

Telephone Stands > Saves space and customises work area.
> Three position angle adjustment.
> Four position height adjustment.
> Two unique swivel trays for post-it notes etc.
> Pen groove facility.
> Storage drawer in base unit. Premium Phone Stand
Cost : £ 15.28

THREADED BUSH FOR ROUND TUBE 48.3MM DIA - M16 THREAD >Glass fibre reinforced assembly bushes with brass threaded bush.
Cost : £ 4.35

LEFT HAND LARGE CUPBOARD TO SUIT STEEL TOPPED BENCH > Range of optional accessories which adapt any of the popular models to suit your individual requirements.
> All accessories are finished in grey epoxy paint.
> Sliding door unit not suitable for 760mm high benches.
Cost : £ 121.38

"QUICK RELEASE RATCHET 1/4"" DRIVE X 145MM LENGTH" >Manufactured from Chrome vanadium steel in accordance with DIN 3122 and ISO 3315.
>Fine tooth ratchet.
>Forward/reverse selector and quick release mechanism.
Cost : £ 19.98

SPOOL MANUAL 6M X 1.4MM Trimmer with 225W motor and manual line feed. On/off trigger control with finger guard. Replacement line Stock No.56726 and spools Stock No.56722 are available. Supplied complete with a BS approved non-rewireable 3 pin moulded plug and approx. 10M of cabl
Cost : £ 3.71

50ML CARTRIDGE ARALDITE FAST CURE 2012. 6+ PACKS CHARACTERISTICS
Appearance Light yellow liquid
Density 1.2
Temperature range - 60?C to + 70?C
Shear strength on aluminium 20 N/mm2
Time required to reach 10 N/mm2 60 min at 23?C or 10 min at 60?C
Packaging Two pot 50 ml cartridge and 2 x
Cost : £ 23.74

AIR LINE GAUGE TWIN CONNECTOR Manufactured and certified to EC Directive 86/217.
Industrial quality with twin open-ended hold on connector. Suitable for use on garage forecourts and tyre fitting bays. A calibration certificate is supplied with each gauge. Carton packed.
Hoses ar
Cost : £ 74.24

ADJUSTABLE BASIN WRENCH 32MM Swivel action universal gripping head with serrated faces. The chrome plated solid steel handle has a sliding tommy bar. Display packed. --
Cost : £ 5.13

FIXED WELDING BOOTH - GREEN CURTAINS. > Strong tube construction and finished in grey enamel.
> Welding booths can be supplied with welding curtains or strips.
> Strips are fastened to the screen by plastic suspension system.
> Plastic suspension hooks supplied for fastening the weld
Cost : £ 630.98

12MM PRINTING TAPES FOR DYMO 3500 BLACK/FLUO GREEN PACK 5. Printing Tape Suitable For Dymo Pocket and Dymo Label Manager 100 Machines
Cost : £ 62.86

FOLDING TABLE JUNIOR/PRIMARY L1830XW760XH635MM GREY LINEN > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 260.85

COLD CHISEL & PUNCH SET 4PCE Chrome vanadium steel hardened and tempered with a chemically blacked finish and plastic grips. Display packed.
Contents:
• cold chisel: 13 x 150mm
• parallel pin punch: 3 x 150mm
• taper pin punch: 5 x 150mm
• centre pu
Cost : £ 6.32

CAST IRON WHEELS DIA 100MM --
Cost : £ 9.87

6 WAY EXTENSION SOCKET 1 MTR Manufactured to BS1363 Specifications and BSI Approved
This slimline design is suitable for use with all household appliances including computers and peripherals up to and including 13A. Fitted with 1M (approx.) of cable and 13A fused three pin plug. P
Cost : £ 6.44

WORKS TRAFFIC STANCHION SIGNS --
Cost : £ 79.9

PLASTIC HANDLE POINTED AWL Pointed blade with plastic handle. Display packed. --
Cost : £ 0.83

PACK 2 S/STEEL M8 KNURLED SCREWS. QTY 6+ PACKS --
Cost : £ 14.1

Overhead Projector Screens > Extension brackets to enable screen to be tilted to accommodate angle of OHP projection. PHP brackets for Wall Screens
Cost : £ 41.71

Braked castors - Optional extra 2 x 100 mm diameter braked castors factory fitted / SERIES 2001 TABLE TROLLEYS
Cost : £ 23.27

50 LITRE STORAGE BIN. HXWXD 508X625X335MM > Constructed from 16 swg zinc coated steel with all welded seams.
> 150mm deep liquid tight sump.
> Flanged lids with hasp and staple for locking.
> Lids fitted with restraining devices to prevent them from falling backwards.
> Finished in si
Cost : £ 172.2

METRIC OPEN ENDED SPANNER 32X36MM X 328MM LENGTH Open ends set at 15 degree
Cost : £ 15.28

EXTRA PER 1/2M 1 LEG WIRE ROPE SLING - 10MM DIA > 6 x 19 construction wire rope to British Standards.
> Strops with eye each end.
> Slings supplied as standard with safety hook. Shackle can be fitted at extra cost.
> Stamped with serial number and WLL.
> Safety factor 5 to 1.
> Test cert
Cost : £ 1.41

POUCH TAPE DISPENSER. 150MM PLASTIC > Dispensing machine for 'Documents Enclosed' pouched tape.
> Complete with heavy base.
Cost : £ 24.09

PARCEL TROLLEY TYPE 8312 > Parcel trolley with 2 removable wire side panels.
> Width of mesh 65x50mm.
> Fitted with 4 grey rubber swivel wheels 125x32mm.
> Maximum load: 200kg.
> Supplied for self-assembly.
Cost : £ 398.33

TAPIR RECEPTION SEATING - SANDVALE >Silver legs.
Cost : £ 238.53

"PK 12 BLANK TUBE END SOCKETS TO SUIT 7/8""X7/8""X18/16G" > Adjustable Feet - with fixed or tilting stem.
> Threaded Sockets - for fixing feet into tube.
> Blank Sockets - to neaten tube ends.
Cost : £ 1.06

Fitted Workshop Cabinets Wall Panels Includes 10 assorted tool hooks. Single tool panel
Cost : £ 69.15

MOBILE SINGLE SCISSOR LIFT TABLE. 1250KG CAP - BATTERY > General construction and safety features as detailed on Britruck Scissor Tables specification.
> Lift heights from 840mm to 1050mm.
> Various table top sizes up to 1000mm x 2000mm.
Cost : £ 2579.13

MAG.BIT HOL.Q/R 1/4(F)X1/4(M) 1/4“ hex. male x 1/4“ female with quick release for use in power drills and driver handles. Shaft (male hexagon) from chrome vanadium steel hardened and tempered with the bit holder (female hexagon) from stainless steel. ‘Quick release‘
Cost : £ 3.6

3/8''X1/4''TAPER UNION M X M ( BSP parallel. Display packed.
*packed ONE union per card
†packed THREE union per card --
Cost : £ 3.07

PACK OF 100 PLASTIC COVERED HOOKS FOR CORD DIA 8MM > Plastic covered mild steel end hooks suitable for use with Refs. 100 - 107W045N.
Cost : £ 38.19

PRINTED POUCH TAPE PER 12 ROLLS > Wording: Document Enclosed.
> Self-adhesive edging - plain centre.
> O/A label size: 150x200mm.
> Minimum 330 labels per roll.
Cost : £ 89.89

K30 SERIES PLATE FIXING Fixed --
Cost : £ 36.43

PK OF 2 YELLOW LONG KNOBS 30MM DIA. M6 THREAD INSERT. QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 12.22

Cordless Jug Kettle > 1.7 litre.
> 360 degree rotational base.
> Removable filter.
> Boil dry cut-out.
> Hinged safety locking lid.
> Cable tidy in base.
> Finish: polished stainless steel with black trim.
Cost : £ 33.49

LEATHER MEDICINE BALL. WEIGHT 3KG > Manufactured from top quality cowhide.
Cost : £ 20.21

EXTENSION TUBE ALUMINIUM 36 and 58mm DIAMETER ACCESSORIES
NOT suitable for for Stock No.59311 or 50583 --
Cost : £ 13.75

BRUSH FOR DELICATE SURFACES 36 and 58mm DIAMETER ACCESSORIES
NOT suitable for for Stock No.59311 or 50583 --
Cost : £ 2.76

CUT/WHEEL-STONE.353X2.8X25.4MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade C30-S-BF 80 medium hard. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 5.65

PK OF 50 MAILMISER JIFFY BAGS INT. SIZE 340X445MM. 1-2PKS > Extra strong side welds.
> Self-sealing envelope style closure.
> Choice of 10 sizes in white Kraft. 1-2 packs
Cost : £ 32.31

PACK OF 4 SLIDE-ON PAN LIDS - PAN WXD 305X455MM Range of Optional Extras to suit Tote Pans
Cost : £ 18.1

Roller shutter cupboard. Extra shelf to suit 500mm deep roller shutter cabinet
Cost : £ 23.68

Pair of accessory rear support posts ACCESSORIES / KEYBENCH 456 CANTILEVER RANGE
Cost : £ 68.56

FOLDING TABLE BUFFET/ADULT L1520XW685XH760MM SAXON OAK > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 227.95

1/2''IMPACT WRENCH (AIR TOOL) General duty impact wrench with one hand forward and reverse direction change. Built-in four position power regulator for simple speed and power control. Display carton.
Specification:
Square drive ... 1/2“
Clutch type ... rocking dog
Cost : £ 45.66

Stackable Bins And Cupboards > Dividers available for Ref. 139F042N. Dividers for Ref.139F042N
Cost : £ 21.15

CROSS DIVIDER. HXL 55X76MM > Enables the user to choose individual components to produce tailor made fitments for the storage of small components and cylindrical tools.
> Our comprehensive selection of standard drawer divider kits is also listed in the cabinet tables; this provi
Cost : £ 1.23

ADJUSTABLE WORK TABLE 700 > Available in 4 sizes.
> Adjustable to 4 different angles.
> Compatible with matching heat sealer.
Cost : £ 111.04

CONTAINER TRUCK WITH CASTORS CAPACITY 260 LITRES > Detachable container tough light and easy to clean. Spare/replacement container available.
> Fitted with 2 fixed and 2 swivel castors with roller bearings and rubber tyres.
> Models B and C - fitted with a food grade container. Model C also fitted
Cost : £ 344.04

BISLEY SIDE OPENING TAMBOUR CUPBOARD. HGHT 1000MM. BEIGE > Welded steel body.
> H1000mm: central single point locking mechanism with cylinder lock.
> H1980mm: 3 point locking mechanism fitted to doors.
> Fire resistant PVC tambour doors with metal end tambour.
> Adjustable shelves with under-rail se
Cost : £ 389.16

MANHOLE COVER LIFTERS --
Cost : £ 353.68

ROUGH DIRT ATTACHMENT 36 and 58mm DIAMETER ACCESSORIES
NOT suitable for for Stock No.59311 or 50583 --
Cost : £ 4.34

FIXINGS WITH TWO THREADED RODS PK OF 5.DEFL.3.5MM --
Cost : £ 13.16

Welding Goggles > Anti-glare shade 5 lens.
> Four port ventilation with moulded filter screens.
> Conforms to EN 166 and 175. Standard Welding Goggles
Cost : £ 6.93

5/8 X 3/4 LARGE BOW SHACKLE SWL 1T 5CWT SCREW PIN --
Cost : £ 9.99

'Taktyle' Braille Signs >Manufactured and moulded matt finish plastic to prevent reflection.
>Patented locating ring - guides the hand to the centre where the information can be easily found.
>Smooth contour lettering and pictograms.
>Self adhesive backing for instant f
Cost : £ 19.98

WIRE SCRATCH BRUSH 4 ROW Wooden stock incorporating a hang hole. The hardened and tempered steel wire fill is 0.35mm diameter with a trim length of 25mm. Sold loose. --
Cost : £ 1.22

NON-MARKING GREY RUBBER TYRES. > To suit Refs. 774-808R037N.
> Factory fitted at time of order.
Cost : £ 19.39

CLEAN/DIRTY LOCKER. HXWXD 1800X450X450MM. LT.GRY/LT.GREY > HxWxD: 1800x450x450mm.
> Fittings: Hat shelf with vertical central divider. Double coat hook in each department.
Cost : £ 114.45

"UTILITY CUPBOARD.O/A HXWXD 72X48X18"". LT.GREY/RED" > All steel riveted/welded construction.
> Semi-concealed hinges for security and clean line appearance.
> Rubber grommets fitted for secure door fit and quiet operation.
> Doors fitted with stiffeners for added strength and security.
> Metal
Cost : £ 336.99

3/8'' PARALLEL FEMALE COUPLING For use with standard adaptors. BSP parallel. Positive lock single action ideally suited for most compressed air applications. Maximum airflow rate 1197L/min (42cfm) at 6.9bar (100 psi). Maximum working pressure 13.8bar (200psi). Display packed. --
Cost : £ 7.84

BROAD RIB RUBBER MATTING LXW 10MX1000MM 5MM GUAGE-BLACK > Available in rolls or cut lengths.
> Excellent impact and sound absorbency.
Cost : £ 296.1

Step Unit > Heavy duty plastic.
> Two height settings: 150 and 200mm.
> Non-slip feet and top.
> Size: 690mm long x 360mm wide.
Cost : £ 36.13

VERTEX 1/4'' HOSE TAILP'CE/ADA For use with standard adaptors. Double action mechanism prevents accidental disconnection and makes the coupling particularly suitable for trailing hose applications. Maximum airflow rate 1197L/min (42cfm) at 6.9bar (100psi). Maximum working pressure 13.8
Cost : £ 7.94

EXTRA FOR SHORTENING CLUTCH 16MM DIA 2 LEG > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 215.03

PLAIN BEARING NYLON WHEEL - WHEEL DIA 50MM - CAP 54KG --
Cost : £ 1.7

CORNER POLE FLAGS - SKY BLUE/ WHITE - PER 4 > Nylon flags with sewn-in sleeve and ties.
> Size: 305x290mm.
Cost : £ 21.74

75X5 MECHANICS S/DRIVER-PCKD Satin chrome plated chrome vanadium steel blades hardened and tempered with shot blasted tip. Some sizes have a hexagon bolster which enables extra power to be obtained by use of a spanner. Square matt black handles manufactured from high impact resistant
Cost : £ 1.62

2000KG CAP LOWLINE CRANE JIB. FORK SPREAD 388MM > Instant drive-in fitting by one man.
> Positive fixing behind fork heels. Fitt
Cost : £ 775.5

HEAVY DUTY SHELVING. TUBULAR SHELVES. 1260MM WIDTH 1000MM D > Available in 2 widths and 5 depths.
> Adjustable in 62.5 mm increments on uprights.
> Choose between tubular or welded sheet steel shelves.
> Tubular shelves:
shelf depth 400 / 500 mm = 3 cross-members;
shelf depth 600-1000 mm = 5 cross-m
Cost : £ 41.77

STAINLESS STEEL REPLACEMENT WORKSURFACE - 1200X600MM 18swg stainless steel (3042B) bonded to 18mm MDF with turned down welded corners
Cost : £ 223.84

Cupboard/drawer unit ACCESSORIES / KEYBENCH 456 CANTILEVER RANGE
Cost : £ 231.36

20M COIL 10MM S.S. WIRE ROPE - 7X19 CONST > Manufactured from high grade stainless steel to AISI 316 standards.
> 1x19 Wire Rope - rigid construction. Suitable for basic rigging.
> 7x19 Wire Rope - flexible construction. Suitable for various applications.
> Slings - thimble eye or soft e
Cost : £ 270.25

DRAWER DIVIDERS TO SUIT DRAWER WIDTH 500MM. HGT 100MM. PER 3 >To suit 750 or 500mm wide drawers.
>100 or 200mm high.
>Supplied in packs of 3
Cost : £ 6.05

3 POSITION DESK CLUSTER + WORK TOP. DARK BLU/GREY FINISH >Innovative desk design leads to great floor space efficiency.
>Dividing shaped top screens provides privacy without isolation.
>Well planned environments encourage higher productivity and efficiency.
>FOC site survey and design survey available
Cost : £ 3313.5

PLAIN SHELF PANEL -PANEL WIDTH 300MM - FRAME DEPTH 900MM >Pre-galvanised steel panels to form solid shelf between beams.
Cost : £ 10.46

"NYLON WHEEL. WHEEL DIA 125MM BORE 1"" - PLAIN BEARING" --
Cost : £ 12.93

RUBBER TYRED WHEEL. CAST IRON CENTRE. BORE 35MM - DIA 400MM --
Cost : £ 284.35

COUNTER/DESK OR DOOR PLATE LETTERBOARD. 153X353MM > Grooved rubber insert to retain letters.
> Complete board can be cleaned if dirty.
> Supplied with set of characters.
Cost : £ 45.83

20G BOTTLE 'LOCTITE' ADHESIVE IMPACT RESISTANT. FF >Base: Ethyl cyanoacrylate.
>Vicosity:100-500 mPas
>Colour: Black
>Cure time: 10 seconds - 2 minutes depending on material.
>Shear strength on sand blasted steel: 22-30 MPa.
>Temperature range: -50c to + 120c
>Storage: 6 months minimum a
Cost : £ 21.15

PACK OF 10 MAGNETIC TICKET HOLDERS. HXL 25X2000MM >Magnetic or self-adhesive backing.
>Bar codes can be read through the clear plastic.
>Insert cards are included.
Cost : £ 81.08

Red Flame Resistant Range > Support stand available for Refs. 3018 and 3019R035N.
> Colour: BS 04E53 red. Optional Extra: Support Stand.
Cost : £ 91.18

PACK OF 12 ROLLS CLEAR STATIONERY TAPE. WDTH 12MM. > Ideal for general office use.
> Light duty.
> Easy to tear.
Cost : £ 8.11

PACK OF 50 SELF-ADHESIVE TICKET HOLDERS. HXL 25X200MM >Magnetic or self-adhesive backing.
>Bar codes can be read through the clear plastic.
>Insert cards are included.
Cost : £ 41.13

SLIDING GLASS BOARDS A3 - HXW 458X342MM - BLUE FELT >Smart bright polished silver aluminium frame.
>Contrasting felt background.
>Top of frame and glass front simply lifts to change notice or picture.
>Discreet operation helps to prevent tampering.
>Ideal for displaying duty rosters as easy to
Cost : £ 55.23

200 BRASS R/HD S/SCREW 3/4X8 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws.
--
Cost : £ 5.33

VELCRO BACKING PAD 200MM For mounting hook and loop backed sanding discs. Sold loose. --
Cost : £ 4.98

T TYPE TAP WRENCH 1.5-3MM SQ Polished body with knurled and polished barrel. Display packed. --
Cost : £ 3.08

CAST IRON WHEELS DIA 75MM --
Cost : £ 6.82

250MM FLAT FILE-BASTARD (12) Manufactured in accordance with BS498:1990
Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 28.76

PAIR OF LONG REAR ACCESSORY SUPPORT POSTS FOR 1500MM BENCH Range of optional accessories.
Cost : £ 66.04

SPARE TYRE/TUBE FOR PNEUMATIC STEEL WHEEL. REF 3248V --
Cost : £ 19.98

PK OF 2 BLACK LONG KNOBS 25MM DIA. M6 THREAD SHANK. QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 4.11

FREEWAY H/D PEDESTAL C/W 3 SINGLE DRAWERS. ENGLISH OAK "> All drawers have a ""lock out"" facility.
This drawer system is guaranteed for five years.
> Handles supplied separately. Not included in pedestal price.
> All pedestals have anti-tilt.
> HxWxD: 565x430x570mm.
> Supplied pre-assembled.<
Cost : £ 235.0

760MM STEEL LOWER SHELF.WIDTH 1200MM. > Range of optional accessories which adapt any of the popular models to suit your individual requirements.
> All accessories are finished in grey epoxy paint.
> Sliding door unit not suitable for 760mm high benches.
Cost : £ 62.86

INDUSTRIAL BENCH SCALES PLATFORM SIZE 520X400X70MM > One key operation.
> Stainless steel platforms.
> Easy to clean and maintain.
> Switchable reading: metric/imperial.
> Tare facility.
> Mains operation or battery pack (supplied).
Cost : £ 692.08

16MM DIA GRADE T 2 LEG CHAIN SLING STD HOOK 2M EWL > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 415.95

3MM DIA 6 X 19 FMC GALV WIRE ROPE 50M COIL > Wire rope manufactured to current British Standards.
> Test certificate can be issued to show sample breaking strains.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 52.88

Mobile Fuel Retrieval Unit >80 litre capacity steel container.
>Aluminium rotary pump delivers fuel at rate of 30-40 litres per minute.
>Integral 400 micron flame arrester filter.
>Fully earth bonded and fitted with two crocodile clips.
>2.5m long fuel grade hose with a
Cost : £ 538.15

3.2T ALLOY SWIVEL HOOK C/W CATCH (16MM DIA ROPE) >Wire rope manufactured to current British Standards.
> Test certificate can be issued to show sample breaking strain.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 51.11

19MM DIA GRADE T 3 LEG CHAIN SLING STD HOOK 2M EWL > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 995.23

INT. VEHICLE FLEXIDOOR HXW 3600X5500MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 904.75

3/4 X 7/8 ALLOY D SHACKLE SWL 4.75 TON - BOLT --
Cost : £ 12.46

WORKBENCH WITH LOWER SHELF. LINO SURFACE. 1800X900MM > 2mm lino on 18mm MDF with a wooden edge.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Standard height: 840mm.
> Bench HxWxD: 1
Cost : £ 494.15

SANDOWN STACKING CHAIR. RED FABRIC/BLACK FRAME > Will stack maximum 10 high.
> Fabric meets BS7176 low hazard.
> Chair linking device available to enable chairs to link neatly in rows.
> Convenient hand hold at the top of the chair for easy handling.
> Frame finish: gold or black.
> Dia
Cost : £ 52.29

PYTHON CABLE LOCK. CABLE LXDIA 1800X10MM > Vinyl sheather braided steel cable.
> Cable Lxdia.: 1800x10mm.
> Tough durable housing with bumper edging to prevent damage to secured articles.
> Supplied with teo keys.
>Weight: 0.8kg.
Cost : £ 29.96

Free Pen For EProcurement Customers > Key logo pen.
Cost : £ 0.01

Additional Shelf For Bisley Tambour Cupboard 100 > Black.
Cost : £ 85.25

ROUND METAL PAPER BIN. CAP 15L METALLIC SILVER > Steel body with galvanized steel bottom and lip.
> Hxdia.: 330x270mm.
> Capacity: 15 litres.
Cost : £ 7.23

Swivel K90 SERIES EXPANDING PLUG FITTING
Cost : £ 15.28

MAINS OPERATED SCRUBBER > Brush/squeegee width: 455/740mm.
> Fresh/dirty water tank: 29/34 litres.
> Working capacity: 1590m2/hr.
> Speed: 160rpm.
> Supplied with medium duty universal scrubbing brush.
> O/A HxWxL: 960x490x850mm.
> 1500W/240v.
> Brush and su
Cost : £ 2204.3

8MM 6X19 FMC THIMBLE EYES WIRE ROPE SLING 2M EWL > 6 x 19 construction wire rope to British Standards.
> Strops with eye each end.
> Slings supplied as standard with safety hook. Shackle can be fitted at extra cost.
> Stamped with serial number and WLL.
> Safety factor 5 to 1.
> Test cert
Cost : £ 20.56

ANTI-VIBRATION MOUNTING. USAGE RANGE 20-92. >Technical characteristics:
Natural frequency: 8 - 10 Hz.
Load range: 4 daN - 136 daN
>Usage:
Traction isolation system.
Filtering of vibrations and reduction of their acoustic effects.
Operating temperature:
-40?C to +70?C.
>Appli
Cost : £ 19.98

INT. VEHICLE FLEXIDOOR HXW 2400X3000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 385.4

Education/Training Chairs > Available with or without arms Low Back Chairs
Cost : £ 49.35

H.D. BENCH WITH SINGLE DRAWER WXD 2000X700MM HARDWOOD > Suitable for all types of engineering and assembly applications.
> Welded leg frames with bolted steel bracing panels ensure robust stability.
> Epoxy painted in light grey.
> 40mm thick MDF core worktops edge banded all round. Available in eit
Cost : £ 440.92

METRIC COMBINATION SPANNER 10MM X 145MM LENGTH >Ring end cranked at 15 degrees
Ring ends have 12 corners with special radius design giving added torque.
>Open end ste at 15 degrees.
>Manufactured to DIN 3113 specification.
Cost : £ 2.88

PK OF 2 BLUE LONG KNOBS 30MM DIA. M6 THREAD INSERT. QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 12.22

110V TRIPOD FLOODLIGHT WITH 500W LAMP > Floodlight complete with 500W lamp.
> Supplied with 2m of cable with plug.
> Height adustable between 1800 and 1980mm.
Cost : £ 38.19

Electronic Postal Scales > Weighing capacity: 2kg.
> Scale features a wipe clean postal rate chart for 1st and 2nd class services for quick rate reference.
> Semi-permanent pen supplied for use with rate chart to allow easy updates.
> Automatic switch off when not in use
Cost : £ 70.5

PK 2 S/STEEL M6 SHORT KNURLED NUTS. --
Cost : £ 7.76

SPARE TIP-40W SOLDER IRON Complies with the Low Voltage Directive
Soldering iron complete with tip and BS approved 3 pin plug and cable. Display packed.
*Sold loose. --
Cost : £ 1.53

S/RIGID SAFETY SIGN. 600X450MM EAR PROTECTORS MUST BE WORN > Designs comply with current relevant UK and EC legislation
Cost : £ 32.31

AIR COMPRESSOR 50L-2HP 230V Air receiver CE Approved.
Features:
• 1.5KW - 230V AC motor
• High output
• Constant cooling system
• Twin outlet regulator/filter
• Thermal protection overload
• Packed on pallet
Specification:<
Cost : £ 798.33

METRIC DEEP OFFSET RING SPANNER 24X27MM X 342MM LGTH >Manufactured to DIN 838 specification.
>Ring end cranked at 15 degrees.
>Ring ends have 12 corners with special radius design giving added torque.
Cost : £ 12.93

PACK 2 S/STEEL M10 KNURLED NUTS. --
Cost : £ 21.74

'ROMEO' HANDLE. WIDTH 20MM. 128MM - QTY 6+ >Handle made from AlMg Si 0.5 oval aluminium section with matt anodised surface. Maximum tensile force greater than 80kg.
Cost : £ 18.21

NON-MARK RUBBER TYRED WHEEL - WHEEL DIA 100MM -PLAIN BEARING --
Cost : £ 6.23

6 POSITION DESK CLUSTER. MID RED WITH GREY FINISH >Innovative desk design leads to great floor space efficiency.
>Dividing shaped top screens provides privacy without isolation.
>Well planned environments encourage higher productivity and efficiency.
>FOC site survey and design survey available
Cost : £ 1731.95

CHROME HAT & COAT STAND. HEIGHT 1730MM > Attractively styled with umbrella holder at the base.
> Eight coat hooks on a revolving top section.
> Steel construction with coloured lacquer or chrome finish.
Cost : £ 54.64

CABINET C/W 5 SHELVES & 24 BLU NXT4 BINS. 1000X1015X430MM > Delivered fully assembled.
> Robust all steel construction.
> Shelves adjustable at 50mm centres.
> Fully recessed handle with 2 keys and a 3 point locking mechanism.
> Finish - Silver carcass and Blue doors.
Cost : £ 387.75

5 LITRES SAFESTEP SF. - TILE RED >Solvent free formulation.
>Chemical resistant/cleanable finish.
>Suitable for use in food related areas (e.g. breweries and canteens).
>Available in grey and tile red.
>Coverage 25m2 per 5 litre pack (roller applied).
>Pedestrian to heavy
Cost : £ 97.53

TYRE TREAD DEPTH GAUGE(92REGS) Gives fast and easy-to-read measurement of tyre tread depth from 1-26mm in one millimetre graduations on sliding barrel. Includes a 1.6mm graduation to comply with MoT minimum tyre tread depth requirement. Plated steel body with pocket clip. Display packe
Cost : £ 2.76

SOLDERING IRON STAND A quality stand with heavy duty metal base. Features a reinforced spring safety holder to prevent flex tangling with spring. Supplied complete with cleaning sponge. Display carton. --
Cost : £ 4.97

15 LITRE SWAB PAIL - O/A HGT X DIA. 304X327MM > Flash arrester dasher and cover.
> Easily removed collar for cleaning.
> Bail handle facilities transporting filled containers.
Cost : £ 176.07

K25 SERIES PLATE FIXING Swivel and Directional Lock
Cost : £ 297.28

SCREWDRIVER & BIT SET 23PC Chrome plated blade with powerful 1/4“ magnetic bit holder. The set is supplied with 20 hardened and tempered 8660 alloy steel 1/4“ bits x 25mm long. Display packed.
Contents:
• screwdriver with 1/4“ magnetic holder
• ada
Cost : £ 12.34

BIO-CHAIN OIL 5 LITRES Bio-degradable oil for all petrol or electric chainsaws. Sold in 1L or 5L containers. --
Cost : £ 23.05

PACK 3 180MM METAL GRIND DISCS For use with Stock No.62120 Air Angle Grinder. Cold pressed resinoid bonded aluminium oxide and glassfibre reinforced. Grit grade A24-R-BF 80. Diameter 180mm and bore 22.2mm. Maximum working speed 80m/sec. Packed 3 discs per display pack. --
Cost : £ 5.86

Swivel K90 SERIES EXPANDING PLUG FITTING
Cost : £ 26.44

INT. VEHICLE FLEXIDOOR HXW 3600X1000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 179.78

"TYPE A - ALL STEEL SCISSORS. O/A SIZE 8""." A - All steel
B - Tough cut
C - Multi-purpose
D - Recycled
Cost : £ 7.4

PACK OF 10 WASTE MESH BASKETS. GREY > Polypropylene.
> Solid base.
> Hxdia: 300x314mm.
> Capacity: 16 litres.
> Pack of 10.
Cost : £ 21.8

50ML BOTTLE 'LOCTITE' ANAEROBIC RESIN - QTY 12+ > Semi-fluid anaerobic resin.
> Colour: Fluorescent yellow.
> Cure time: 20/30 minutes.
> Immediate sealing at low pressure.
> Time before usage: 12 hours.
> Breaking force on M10 bolt: 6/15 Nm.
> Maximum gap: 0.4 mm.
> Prolonged peak
Cost : £ 19.98

3-WAY CONNECTORS FLAT FOR BLACK SQUARE TUBE - PACK OF 4 > Impact resistant ABS with a steel core. These provide maximum rigidity and load bearing strength.
Cost : £ 26.44

P/FORMED LAMINATE BENCH AND SHELF. LXW 1200X600MM. > 1.3mm laminate on 18mm MDF with post-formed edge.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Standard height: 840mm.
> Bench
Cost : £ 378.47

GARDEN LIGHT SET 4PC GS and TUV Approved
Set for the garden comprising four heavy duty plastic louvered lights and a 230V AC-12V transformer (not weatherproof) with non-rewireable 3 pin moulded plug and 1.5M (approx.) of cable. Lights are on stems (optional) with spikes an
Cost : £ 24.42

RIGID SPOUT STANDARD OILER. CAPACITY 125ML > Heavy gauge metal body. > Positive
Cost : £ 9.28

BLACK SECURITY HANDIWRAP ROLL WXL 100MM X 100M - PER 5 > Secures and bundles items together.
> Sticks to itself for ease of use.
> Supplied complete with dispenser.
> Gauge 17 microns.
Cost : £ 17.63

WHITE PACKING FOAM. ROLL LXW 300M X 500MM (PER 3). 1-4 PKS > Dust and lint free.
> Water resistant and non-abrasive.
> Choice of standard white foam or heavy duty
blue with extra thick ribbing.
Cost : £ 69.33

PK OF 2 BLACK LONG KNOBS 40MM DIA. M10 INSERT THREAD QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 11.16

PK OF 2 WHITE LONG KNOBS 25MM DIA. M6 THREAD INSERT. QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 11.75

BUILDERS TRESTLE K/D Telescopic action with height adjusting locking bars. Dual locking safety arms and folding support braces for rigidity when working. Trestles fold down neatly for safe storage. Maximum loading 150kg. Manufactured from heavy duty box section steel. Supplie
Cost : £ 19.87

CARTON OF 36 ROLLS BROWN POLYPROPYLENE TAPE. WDTH 48MM > Excellent adhesion properties.
> Impact resistant.
> Waterproof.
> Especially useful in cold conditions - will not dry out or crack.
> Roll length: 66 metres.
> Colour: brown or clear.
> N.B. Packs of one colour only.
Cost : £ 38.19

S/A LABEL DISPENSER - CLEAR INT WIDTH 300MM > The simple and easy way to dispense self-adhesive labels from rolls.
> Improves efficiency and cuts down label wastage.
> One handed operation.
> Adjustable separator plates to accommodate a number of rolls of differing widths.
Cost : £ 71.68

10MM DIA 6 X 19 FMC UNGALV WIRE ROPE 100M COIL > Wire rope manufactured to current British Standards.
> Test certificate can be issued to show sample breaking strains.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 219.73

"WOODWORKER VICE JAW WIDTH 7""/175MM" > Grey cast iron body and front plate are precison machined to house two solid steel guide rods giving the vice a smooth true parallel action free of side or cross movement.
> Steel main screw has a two start acme thread for fast accurate adjustment.Cost : £ 121.03

K25 SERIES PLATE FIXING --
Cost : £ 164.5

100L GRY/BLUE HOODED BIN. HXWXD 1100X420X420MM >Slam lock hinging hood ensures secure containment and efficient removal of litter.
>HxWxD: 1100x420x420mm
N.B Please specify colour when ordering.
Cost : £ 306.68

ADHESIVE SPREADER/GROUTER Serrated edge for spreading tile adhesive with rubber blade for tile grouting. Sold loose. --
Cost : £ 2.67

1''IMPACT WRENCH-6''ANVIL Powerful heavy duty impact wrench with a 150mm extended anvil. It has an easy forward and reverse mechanism and variable torque settings. Carton packed.
Specification:
Square drive ... 1“
Clutch type ... roller pin
Bolt capacity ..
Cost : £ 542.5

Swivel + brake K90 SERIES EXPANDING PLUG FITTING
Cost : £ 16.45

GLASTRONORM PERF. BASE/SIDES CONTAINER. TYPE 1/2.DPTH 100MM > Manufactured to a high standard using 0.8mm 304 stainless steel.
> No distortion on heating any size.
> No jamming during storage.
> Suitable for any application.
> Perforated containers are used in their own right as containers in a steam
Cost : £ 31.73

BLACK DURASTEP ANTI-FATIGUE MATTING. LXW 18.3M X 1200MM >Features a high density PVC foam top surface that offers greater durability.
>Low-density bottom surface offers excellent fatigue relief properties.
>Durastep stimulates blood circulation and reduces stress in the lower back and leg muscles.
>Av
Cost : £ 1229.05

CAST IRON POLYURETHANE TYRED SWIVEL CASTOR. 200MM - ROLLER Fixing holes: to suit 10mm diameter bolts.
Cost : £ 88.13

PK OF 10 DOUBLE PRONG ANGLED HOOK TOOLHOLDER. LXDIA 50X4MM > Zinc plated
> Can be located at any position where holes appear.
> Securely located by a plastic clip.
> Quickly and easily repositioned when necessary.
Cost : £ 16.22

74LTR DISTRIBUTION CONTAINER. LXWXH 610X400X440MM - BLUE > Reduce packaging waste.
> Avoid unnecessary repacking.
> Designed to minimise nesting volume (70%).
> Conform to Euro sizes.
> Comfortable handling due to generously spaced and ergonomic handgrips.
> Colour: dove-blue.
> Labels area.
Cost : £ 24.68

4-WAY CONNECTORS CORNER FOR BLACK SQUARE TUBE - PACK OF 4 > Impact resistant ABS with a steel core. These provide maximum rigidity and load bearing strength.
Cost : £ 30.2

REVERSE CIRCLIP PLIER ST 150MM Reversible position allows use on internal or external circlips. Manufactured from selected steel hardened and tempered with cushion-grip handles. Display packed. --
Cost : £ 3.41

"3 SHELF OFFICE/IND. CUPBOARD. O/A 72X36X18"". LT.GRY/RED" > All steel riveted/welded construction.
> Semi-concealed hinges for security and clean line appearance.
> Rubber grommets fitted for secure door fit and quiet operation.
> Doors fitted with stiffeners for added strength and security.
> Metal
Cost : £ 266.55

CAPPS MENS' BOOT - SIZE 8 > Manufactured to EN345.
> Rubber nitrile sole.
> Heat resistant to 300 degrees C.
> Resistant to oils and solvents.
> Leather uppers.
> 200 jule steel toe cap.
> Size: 6-12.
Cost : £ 58.16

Xtra-Glo Safety Signs - Class D > For high areas where egress may be slow.
> Where light levels are low.
> Where illumination may be lost for some time prior to evacuation.
> 1.3mm thick self-adhesive rigid plastic tested to DIN 67510 Part 1. Signs with incredible initial brig
Cost : £ 21.74

PACKHAM SEAT - 2400MM LONG WITH ARMS - PEDESTAL FIXING > Timber slats 110x95mm.
> Front and rear timbers are each splayed towards central slat to create slightly dished seating surface for extra comfort.
> Black plastic coated frames.
> Timber colour: light mahogany. Other shades available upon req
Cost : £ 788.43

EXTENDING CRANE JIB. TRUCK CAP 4000KG. FORK SPREAD 546MM > Instant drive-in fitting by one man.
> Positive fixing behind fork heels. Fitt
Cost : £ 1092.75

FOLDING TABLE BUFFET/ADULT L1520XW685XH760MM AUBURN TEAK > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 227.95

PACK OF 4 AAA DURACELL PLUS BATTERIES > Alkaline.
> Long life batteries.
> Gold tipped.
Cost : £ 3.7

16MM GRADE T 3 LEG CHAIN SLING C HOOKS 2M EWL > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 804.88

FACTORY FITTED REAR TOWING HITCH. > Factory fitted accessries to suit Trailers for Powered Towing
Cost : £ 79.9

PACK OF 12 ROLLS CLEAR POLYPROPYLENE TAPE. WDTH 37MM > Excellent adhesion properties.
> Impact resistant.
> Waterproof.
> Especially useful in cold conditions - will not dry out or crack.
> Roll length: 66 metres.
> Colour: brown or clear.
> N.B. Packs of one colour only.
Cost : £ 9.28

NOVUS ECONGRAPH F1 JOINTING. 1.5MM THICK.SHEET SIZE 0.5X 1M >A pure exfoliated expanded graphite jointing complete with stainless steel (SS316) foil insert for improved handling characteristics.
>Manufactured to a high standard of quality and purity and can be supplied with certification for total confidence.Cost : £ 61.1

140ML TUBE ARALDITE STANDARD 2011 - PER 2. 6+ PACKS CHARACTERISTICS
>Appearance Translucent yellow viscous liquid
>Density 1
>Temperature range - 60?C to + 70?C
>Shear strength on aluminium 20 N/mm2
>Time required to reach 10 N/mm2 10 hours at 23?C or 45 min at 60?C
>Packaging Two pot 50
Cost : £ 24.09

10MM DIA 6 X 19 FMC UNGALV WIRE ROPE 300M COIL > Wire rope manufactured to current British Standards.
> Test certificate can be issued to show sample breaking strains.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 619.23

SPARE GEARED CHUCK J33 13MM Manufactured to exacting standards from fully hardened tool steel. Female mount. Supplied complete with chuck key. Display packed. --
Cost : £ 28.53

CARTRIDGE. SAPPHIRE AQUA 2 GREASE. QTY 12+ >Synthetic hydrocarbon based bearing grease. Reliable lubrication assured over a wide temperature range. Used to reduce the risk of carbonisation and failure in all bearings (especially journal and ball bearings).
>SAPPHIRE HI-TEMP2 is the grease for b
Cost : £ 9.75

ICTUS OFFICE DESKING. HXWXD 720X800X800. BEECH/BEECH > 25mm thick tops with scratch resistant melamine finish and shock absorbing ABS edge. Available in light grey or beech.
> 25mm thick side and front panels are made of melamine in anthracite or beech.
> Desk height 720mm.
> Each desk has two cab
Cost : £ 107.04

3/8 X 7/16 ALLOY D SHACKLE SWL 1 TON - SCREW PIN --
Cost : £ 3.64

COMPRESSOR WHEELS 250X20MM For use on compressor protection/lifting frames. 250mm diameter wheels with 20mm bore. Sold loose. --
Cost : £ 13.65

BISLEY DOUBLE DOOR CUPBOARD. HEIGHT 1000MM - BEIGE > Available in two heights.
> Welded steel body.
> 3 point locking mechanism on doors.
> Adjustable shelves with under-rail set at 330mm for lateral files.
> Height adjustable levelling feet.
> Scratch resistant powder coated finish.
> E
Cost : £ 225.37

175MM D/E SAW FILE(1) PACKED Manufactured in accordance with BS498:1990
For sharpening non hardpoint saw teeth. Supplied complete with handle (unassembled). Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Display packed.
Cost : £ 2.06

200 BRASS TRAD.S/SCREW 1.1/4X6 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws. --
Cost : £ 4.89

200 BRASS R/HD S/SCREW 1X6 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws.
--
Cost : £ 4.43

GREEN KEEPER. LXW 18M X 900MM BLUE >Supplied in mats and rolls. Mats are bordered on all 4 sides and the rolls have a border on both long edges.
>The polypropylene surface is solution dyed for superior colour fastness in all extremes of sunshine and weather all year round.
>Ideal fo
Cost : £ 514.65

ELECTRO CONDUCTIVE CONTAINER. 25 LTR CAP. WXD 600X400MM. > Manufactured from first grade electro-conductive polymer compounds.
> Temperature range: Max.100?C.
> Surface resistance of <10 Ohm/cm.
> Volume resistance of 500 Ohm/cm.
> Containers comply with the requirements of DIN 53482.
Cost : £ 25.85

Roller shutter cupboards Extra shelf to suit 325mm deep roller shutter cupboards.
Cost : £ 16.22

CHEMICAL PUMP WITH NITRILE DIAPHRAGM- > 25mm diameter inlet/outlet.
> Maximum delivery: 60ltr per minute.
Chemical Pump
> Incorporates PVC safety deflector to protect operator from spillage. Suitable for wall or floor mounting.
> HxWxD: 170x170x150mm.
> Weight: 1.0kg
Cost : £ 116.91

GREEN KEEPER. LXW 1800X1200MM GRASS GREEN >Supplied in mats and rolls. Mats are bordered on all 4 sides and the rolls have a border on both long edges.
>The polypropylene surface is solution dyed for superior colour fastness in all extremes of sunshine and weather all year round.
>Ideal fo
Cost : £ 69.91

"3 SHELF OFFICE/IND. CUPBOARD. O/A 72X24X18"". LT.GRY/GREEN" > All steel riveted/welded construction.
> Semi-concealed hinges for security and clean line appearance.
> Rubber grommets fitted for secure door fit and quiet operation.
> Doors fitted with stiffeners for added strength and security.
> Metal
Cost : £ 225.07

60 DRAWER CABINET. HXW 940X920 DRAWER DEPTH 190MM - GREY/BLUE >Manufactured form 1 and 1.2mm steel sheet.
>Seam and spot welded.
>Each drawer supplied with self-adhesive label holder.
>Overall Cabinet depth
drawer depth 190mm = cabinet depth 270mmm.
drawer depth 290mm = cabinet depth 370mmm.
drawer
Cost : £ 524.29

2000 SERIES OVERHEAD DOOR CLOSER FOR 950MM WIDE > To BS EN1154 - fire rated for 2 hours on timber doors.
> Die cast aliminium body with steel cover.
> Body HxWxD: 48x249x59mm.
> Finish: bright chrome cover; black arms.
> Refs.159/160A202 with fixed strength closer.
> Ref. 161A202 with a
Cost : £ 113.98

"2 SHELF OFFICE/IND. CUPBOARD. O/A 48X36X18"". LT.GRY/RED" > All steel riveted/welded construction.
> Semi-concealed hinges for security and clean line appearance.
> Rubber grommets fitted for secure door fit and quiet operation.
> Doors fitted with stiffeners for added strength and security.
> Metal
Cost : £ 196.17

Eco gun for 50 ml cartridges -- VERY LONG WORKING LIFE ARALDITE 2011: MULTI-PURPOSE with PROGRESSIVE curing / ARALDITE 2011 MULTI-PURPOSE PROGRESSIVE CURING
Cost : £ 14.1

WAVE DESK. 1600X1000X800MM LEFT HANDED. GREY ASH > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 229.13

WEYLUX BENCH STANDING SCALES - 100KG X 50G CAPACITY > Mains powered LED display.
> Dual reading kg/lb.
> Zero key to balance containers and facilitate recipe weighing.
> Visual overload warning.
> Platform WxD: 380x430mm.
> Height: 770mm.
Cost : £ 897.7

PK OF 2 WHITE LONG KNOBS 45MM DIA. M10THREAD SHANK QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 27.61

4''CHROME PLTD VIC.LEV.LATCH-P Chrome plated brass handles supplied complete with follower bar and fixings. For internal use. Carton packed. --
Cost : £ 5.62

INT. VEHICLE FLEXIDOOR HXW 4000X3000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 548.73

DOLLY WITH HANDLE TO SUIT REFS 126/127F024N > Galvanised Dollies to suit Bins with Integral Handles.
Cost : £ 90.48

RUBBER TYRED WHEEL. CAST IRON CENTRE. BORE 20MM - DIA 150MM --
Cost : £ 22.91

Freeway Furniture 1. Vertical cable management. Perforated metal leg cable tidy. Clips to tubular leg.
2. Horizontal wire management accessories. Horizontal self-adhesive wire management ducting. 3-way seperation.
3. Flexible vertical cable spine cover/seperator.
Cost : £ 41.13

STACKING TRAY. O/A LXW 762X457 48LTR CAP. PERF SIDES & BASE > Available in three heights.
> All trays interstack with each other.
> O/A LxW: External - 762x457mm.
Internal - 715x412mm.
> Secure cross stacking of trays and lids improves air circulation thereby accelerating product cooling.
> Slide s
Cost : £ 14.1

DIACUT HARDPOINT TENON SAW 10' Hardened and tempered electro steel blade. The diamond cut teeth need no sharpening or setting. The tough plastic handle is fixed to the blade by two sawscrews. Display packed. --
Cost : £ 8.93

13MM CHAIN - EXTRA PER METRE Chains and Fittings
Cost : £ 7.87

DELUXE RED/WHITE STRIPED PARASOL > Table dia: 980mm.
> Parasol supplied in white and red stripes.
> Table colour: white.
Cost : £ 62.86

ACID STORAGE CABINET. HXWXD 710X915X483MM > Manufactured to the same high standards and specifications as the SC Series.
> Incorporating the same features but finished in white polyester powder coating giving a surface which is resistant to most acids and alkalis.
> All supplied with the ap
Cost : £ 286.94

100M COIL 10MM S.S. WIRE ROPE- 7X19 CONST > Manufactured from high grade stainless steel to AISI 316 standards.
> 1x19 Wire Rope - rigid construction. Suitable for basic rigging.
> 7x19 Wire Rope - flexible construction. Suitable for various applications.
> Slings - thimble eye or soft e
Cost : £ 983.48

SHELF LXWXD 900X225X18MM WHITE ASH > Shelf brackets simply slot into wallbands to give easily adjustable shelves.
> Fixing kits: wallbar kit; 10 screws and wallplugs. Shelf kit; screws for five brackets.
> Bracket load capacities are evenly distributed loads (not point loads).
Cost : £ 11.52

R.HAND ZEST CORE WORKSTATION. WXD 1600X1200MM. OAK > Zest is an extremely strong and functional range of office furniture.
> Grey or black steel frames support 25mm MFC tops with matching 3mm ABS edging. Please specify. Grey supplied as standard.
> Cable management available as optional extra. Co
Cost : £ 305.5

20 X 400MM MASONRY DRILL PCKD --
Cost : £ 10.14

BENCH TOP UNIT C/W 16 ASST. BINS > Ideal for direct access on the work bench.
> Strong polypropylene frame c/w three or four rows of bins.
> O/A HxWxD: 390x500x310mm.
Cost : £ 71.09

XSTAMPER PER-INKED STOCK STAMP 'COPY' - BLUE INK >Blue or red options.
>Can be re-inked.
Cost : £ 10.22

PILLOW Set comprises:
> A - Treatment couch with adjustable headrest.
> B - Polyester filled pillow.
> C - Scarlet cotton blanket.
> E - Workstation with lockable drawers and doors. O/A HxWxD: 1200x915x457mm. Epoxy powder coated finish.
> F - 12lt
Cost : £ 8.64

ZEST DOUBLE PEDESTAL DESK. HXWXD 720X1600X800. BEECH > Zest is an extremely strong and functional range of office furniture.
> Grey or black steel frames support 25mm MFC tops with matching 3mm ABS edging. Please specify. Grey supplied as standard.
> Cable management available as optional extra. Co
Cost : £ 512.3

25 MACHINE SCREW PANHEAD M5X30 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Zinc plated. Packed in polybags of 25 (approx.) screws.
*Pozi/Supadriv are registered trademarks of European Industrial Services Ltd. --
Cost : £ 0.48

STEEL/PLAIN DIVIDERS SET - 9 COMPARTMENTS.DRAWER HGT 100MM > This range of accessories is designed to enhance the efficiency of the 438 x 438 mm sized drawers used in all Bott Series 55 products.
> Select from 3 types of accessory sets. For individual components select from range offered at foot of page.
>
Cost : £ 19.39

2500KG CAP LOWLINE CRANE JIB. FORK SPREAD 388MM > Instant drive-in fitting by one man.
> Positive fixing behind fork heels. Fitt
Cost : £ 787.25

"3/8"" RUBBER AIR HOSE - LENGTH 25FT" ">Ideal for garage or workshop use.
>3/8"" high visibility yellow PVC reinforced air hose.
>300 PSI working pressure suitable for most pneumatic equipment.
>1/4"" brass male BSP end fittings.
>25 or 50ft lengths available."
Cost : £ 13.51

Timber Pallets And Pallet Collars > 1 tonne capacity
> Home grown softwood deckboards.
> English hardwood bearers.
> Fixings: annular ring shank nails.
> Entry is always on 1200mm long sides.
> N.B. Leading bottom boards can be through chamfered at additional cost.
With
Cost : £ 27.79

16MM GRADE T 4 LEG CHAIN SLING SAFETY/CATCH 2M EWL > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 996.4

MOBILE PEDESTAL. 1 DRAWER & 1 FILING. LT.GRY/ANTHRACITE Mobile
> Choice of 2 drawers (of which 1 filing drawer for A4 suspension files) or 3 drawers with telescopic ball bearing rails.
> Central locking on all drawers.
> Cylinder lock and hinged key which prevents from breaking.
> Complete wooden
Cost : £ 167.2

REPLACEMENT SWIFT ATTACHMENTS 1000. 13MM LONG. > Replacement swift attachments to suit Ref. 109A062N.
Cost : £ 9.81

VISTA BIN HXWXD 200X305X610MM >Designed for bulk storage and individual item picking.
>Strongly constructed from galvanised steel.
>Reinforced rim.
>Stackable.
>Fitted with half-lift handles and card holders.
Cost : £ 20.56

EXTRA/M CIRC FOR S.S. ENDLESS SLING - 7MM DIA > Chain hooks c/w safety catch.
> Test certificate supplied with each sling.
> Standard length 1 metre EWL.
Cost : £ 106.34

WALL UNIT C/W 8 YELLOW HAT/ COAT HOOKS. O/A HXL 140X915MM > Varnished wood panels fitted with yellow coat/hat hooks.
Cost : £ 53.46

21 DRAWER CABINET. HXW 940X920 DRAWER DEPTH 390MM - GREY/GREY >Manufactured form 1 and 1.2mm steel sheet.
>Seam and spot welded.
>Each drawer supplied with self-adhesive label holder.
>Overall Cabinet depth
drawer depth 190mm = cabinet depth 270mmm.
drawer depth 290mm = cabinet depth 370mmm.
drawer
Cost : £ 487.86

SINGLE PEDESTAL DESK 3 SHALLOW DRAWERS. 720X1200X800MM.LT.OAK > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 188.0

NUT & BOLT ASSORTMENT 1001PC Assortment of various nuts and bolts in plastic drawers within a sturdy plastic cabinet. Pre-drilled holes for wall mounting. Display carton.
Contents:
• 86 (approx.) machine screws
• 165 (approx.) machine bolts
• 250 (approx.)
Cost : £ 12.64

PORTABLE ALUMINIUM GANTRY. SWL 1000KG. > Height and beam length can be adjusted.
> Fitted with 125mm diameter swivel castors with 4 position locking.
2 with full wheel brakes. All with
non-scuff polyurethane tyres.
> Two transit straps included.
> Test certificate supplied.
Cost : £ 3297.05

MOBILE WELDING BOOTH - GREEN CURTAINS. > Strong tube construction and finished in grey enamel.
> Welding booths can be supplied with welding curtains or strips.
> Strips are fastened to the screen by plastic suspension system.
> Plastic suspension hooks supplied for fastening the weld
Cost : £ 695.6

S.STEEL GLASTRONORM CONTAINER. TYPE 2/3 - DEPTH 20MM > Manufactured to a high standard using 0.8mm 304 stainless steel.
> No distortion on heating any size.
> No jamming during storage.
> Suitable for any application.
> Perforated containers are used in their own right as containers in a steam
Cost : £ 14.1

16MM GRADE T 2 LEG SLING SAFETY/CATCH 2M EWL > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 495.85

25MM BRADS X 880 > Built-in safety trigger catch.
> 3.5m length cord gives a long reach and easy accessibility.
> Universal magazine for both staples or brads enables a variety of applications.
General Purpose Tacker
> Loading capacity: 175 staples.
> Stapl
Cost : £ 11.75

PK 20 TRIPAC POSTAL TUBES. LXDIA 700X70MM > RECYCLABLE.
> Saves on storage space both before and after use. Comes flat packed.
> Seconds to assemble.
> Re-sealable locking tab system.
> Self adhesive strip along the length provides security.
> Supplied in packs of 20.
Cost : £ 41.71

VERTEX COUPLING BODY 3/8''F For use with standard adaptors. BSP taper. Double action mechanism prevents accidental disconnection and makes the coupling particularly suitable for trailing hose applications. Maximum airflow rate 1197L/min (42cfm) at 6.9bar (100psi). Maximum working pr
Cost : £ 7.77

H.D ALUMINIUM FOLDING TABLE WXL 610X915MM HGT/COL BELOW Choose from 15 laminate colours and 3 different heights to ideally suit your particular requirements.
Ideal for more demanding environments.
Construction as Standard Range but with strengthened legs - steel core with aluminium cladding.
Cost : £ 103.4

BRASS SINGLE CLICK PADLOCK. WIDTH 30MM > Single click closure.
> Supplied with 3 steel keys.
> N.B. Padlocks not supplied keyed alike.
Cost : £ 1.12

PUSH FLAP LITTER BIN WITHOUT GALV LINER. 985X355X355. GREEN > Litter entry from one side only.
> Design allows this bin to stand against a wall.
> HxWxD: 985x355x355 mm.
> Capacity: 80ltr.
Cost : £ 173.14

C-TORK 2 PLY HAND TOWELS. SIZE 250X330MM. > Can halve the cost of cabinet linen.
> Flat towel systems for the busy washroom.
> Hygienic fresh towels each time.
> Controlled dispensing of one towel at a time.
> Available in 1 or 2 ply.
Cost : £ 37.01

WHITE METAL MINI BOX DISPENSER > Secure lockable box.
> Totally protected towels.
Cost : £ 27.03

DRAWER INSERT C/W 24 COMPARTMENTS.DRAWER HGT 100MM > This range of accessories is designed to enhance the efficiency of the 438 x 438 mm sized drawers used in all Bott Series 55 products.
> Select from 3 types of accessory sets. For individual components select from range offered at foot of page.
>
Cost : £ 39.89

HALF HEIGHT SHOWCASE & LIGHTS 3 SHELVES. 900X640X460MM. Reference 155 - 157F008N have a central glass panel and are supplied complete with stem lighting which is fixed from the base of the counter.
Cost : £ 645.08

STRETCHWRAP KIT - 6 ROLLS 20MU CLEAR FILM + INTEGRAL CARD > 17 micron (mu) = light duty.
> 20 micron (mu) = medium duty.
> 35 micron (mu) = heavy duty.
Cost : £ 50.53

BOX 100 OIL ONLY ABSORBENT BROWN DOUBLE WEIGHT PADS > Absorbs petroleum and other oil based liquids without absorbing water.
> Can be incinerated to reduce waste.
Cost : £ 103.4

DIE HOLDER FOR 13/16OD DIES Three screw pattern. Display packed. --
Cost : £ 2.76

BULB PLANTER LONG HANDLE Long handled planter manufactured from chrome plated carbon steel. Bulb planter has foot treads to assist planting in heavy soil conditions. Sold loose with label. --
Cost : £ 5.89

Brooms and Brushes > Wood stock.
> Stiff bassine knots.
> Broom stay required.
> Suits broom handle Ref. 119J058A. Platform broom - bassine tufts
Cost : £ 9.64

S/S SELF ASSEMBLY WASH UNIT. HXWXD 850X2400X650MM 2 BOWLS. > 1.2mm 304 stainless steel top and shelf.
> 30mm 304 stainless steel legs.
> Plastic adjustable feet.
> Sound deadened top.
> Removable undershelf.
> Drainers can be fitted left or right handed. Right will Please specify. be supplied as st
Cost : £ 949.4

LOG STAND (FOR CHAINSAWS) Plated steel construction with lock down clamp and handle. Holds logs etc. whist cutting with chainsaws or manual cutting saws e.g. bow saws. Supplied in packed flat form. --
Cost : £ 80.46

EXTRA FOR SHACKLE - 4 LEG WIRE ROPE SLING > 6 x 19 construction wire rope to British standards.
> Strops with eye each end.
> Slings supplied as standard with safety hook. shackle can be fitted at extra cost.
> Stamped with serial number and WLL.
> Safety factor 5 to 1.
> Test cert
Cost : £ 3.17

Badminton Racket Wall Rack > Manufactured from plastic coated steel.
> Capacity to hold fourteen rackets.
Cost : £ 17.21

OLYMPUS FULL FACE SILICONE MASK Mask
>Wide scrath resistant polycarbonate visor.
>Soft single reflex seal and inner mask to ensure complete safety and reduce visor fogging.
>Twin exhale valve for increased wearer comfort.
>Single size with five point adjustable suspension ha
Cost : £ 111.63

4 X M12 ANCHOR BOLTS. > Mild steel post and base with powder coated finish.
> Pre-drilled base accepts 4xM12 Anchor bolts.
> Locks can be supplied keyed alike or to differ. Please specify. Keyed alike will be supplied if not specified.
> Height x dia: 762x89mm.
> G
Cost : £ 12.34

CAST IRON WHEEL. WHEEL DIA. 250MM - BALL BEARING --
Cost : £ 79.31

WEYLUX BENCH STANDING SCALES - 50KG X 10G CAPACITY > Mains powered LED display.
> Dual reading kg/lb.
> Zero key to balance containers and facilitate recipe weighing.
> Visual overload warning.
> Platform WxD: 380x430mm.
> Height: 770mm.
Cost : £ 897.7

3 TONNE H/D TROLLEY JACK Manufactured to EN1494 Specification
Heavy duty design with integral American-style release mechanism and two-piece handle. Incorporates ‘quick lift‘ pedal which when depressed brings the saddle into contact with the jacking point without the
Cost : £ 125.69

K154 SERIES Ball type furniture castors VARIOUS FIXINGS --
Cost : £ 28.79

PK OF 2 WHITE LONG KNOBS 30MM DIA. M8 THREAD INSERT. QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 12.93

STANDARD FELT NOTICE BOARD. DOUBLE DOOR.1800X1200MM. BLUE > Double Door.
> Tamperproof notice boards designed to protect displayed information.
> Standard felt notice boards accept velcro as well as pins and are colour fast to BS1006.
Cost : £ 336.05

PK OF 2 BLUE LONG KNOBS. 40MM DIA. M10 THREAD INSERT QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 18.8

EXTRA FOR SHORTENING CLUTCH 16MM DIA 3 LEG > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 309.03

ZEST CANTILEVER WORKSTATION. 720X800X800MM. BEECH > Zest is an extremely strong and functional range of office furniture.
> Grey or black steel frames support 25mm MFC tops with matching 3mm ABS edging. Please specify. Grey supplied as standard.
> Cable management available as optional extra. Co
Cost : £ 169.2

SAW BLADE TCT 235X35MMX30T Quality tungsten carbide tipped (T.C.T) blades hardened and strengthened to ensure a long life. Display packed. Unit of Sale: 1 blade. --
Cost : £ 22.91

SINGLE SPEED HAND WINCH WITH WIRE ROPE. CAPACITY 818KG > One piece pressed frame - zinc plated.
> Heat treated pinion gears and ratchets.
> Standard mounting holes.
> All models in ranges A to E available fitted with wire rope.
Cost : £ 145.7

DRAWER BIN. LXWXH 400X234X90MM DOVE-BLUE > The solution for storage in shelves.
> High mechanical resistance.
> Safe stacking.
> Delivered with large label.
> Colour: dove-blue.
Cost : £ 4.7

Drum Handlers Tilting Lifter
> Short lever for tilting drums and 'up-ending' on to transporter.
> O/A LxW: 1300x420mm.
> Weight: 6kg.

Up/Down Ender
> 'Up-ending' and 'down-ending' drums.
> LxW: 1725x250mm. O/A handle width 600mm.
> Weight: 12kg
Cost : £ 87.42

PACK OF 25 STANDARD GLS LIGHT BULBS - 40 WATT BC CLEAR > Standard General Lighting Service (GLS) bulbs.
> 1000 hour life average.
> Bayonet cap (BC) or Edison (ES) fitting.
> 240 volt supply.
> Pearl or clear available.
> Supplied in packs of 25.
Cost : £ 13.51

LOWBAY LUMINAIRE WITH 400W SON SODIUM LAMP > CE marked.
> Manufactured to IP20.
> Suitable for mounting heights above 3.5 metres.
> Removable gear tray.
> Universal fixing arrangement.
Cost : £ 114.56

STANDARD TREATMENT COUCH Set comprises:
> A - Treatment couch with adjustable headrest.
> B - Polyester filled pillow.
> C - Scarlet cotton blanket.
> E - Workstation with lockable drawers and doors. O/A HxWxD: 1200x915x457mm. Epoxy powder coated finish.
> F - 12lt
Cost : £ 354.85

13-19MM STRAPPING TENSIONER. > Up to 6 times lighter.
> Weather resistant.
> Will tolerate extreme temperature -40 degrees C to +135 degrees C.
Cost : £ 61.1

18V Cordless Rotary Drill Kit >Variable speed control.
>Forward and reverse rotation.
>6 position torque control.
>Keyless chuck.
>Anti-slip soft grip and trigger.
>3-5 hour charger.
>Nylon carrying strap.
>Screwdriver bit storage compartment.
>Supplied complet
Cost : £ 56.99

RUBBER TYRED WHEEL. CAST IRON CENTRE. BORE 15MM. DIA 125MM --
Cost : £ 17.63

WHITE NYLON WHEEL DIA 150MM --
Cost : £ 17.63

STANDARD MESH WALL PANEL. HXW 2200X750MM. SIMPLE AND EASY TO INSTALL
> Suitable for permanent or temporary siting - can be easily relocated.
> Unique method of fixing ensures system cannot be dismantled from outside the enclosure.
> Bolt together assembly with pre-drilled holes. All nec
Cost : £ 49.94

BANDSAW BLADE 1638MMX1/2''X24T For all Draper bandsaws and other manufacturers similar machines. Display packed. --
Cost : £ 10.13

GRIND/DISC-STONE-115X6.0X22.2 Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade C24-N-BF 80. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 1.07

K95 SERIES PLATE FIXING --
Cost : £ 13.51

LIGHT DUTY KEYBENCH.GREY LINO WXD 1800X900MM. Workbenches
> Ideal packing bench or for light assembly work.
> Solidly constructed from 16 and 14 swg sheet and square tube sections.
> Adjustable plastic insert feet.
> Full range of cupboard and drawer accessories.
> Standard height: 840
Cost : £ 362.14

DOUBLE SWIVEL COMBINATION TUBE CLAMP. TYPE 'A' For use with galvanised steel tube.
Match tube clamp type with tube type for an exact fit.
Fitted with hexagonal screws.
Hexagonal keys and ratchet spanner available on request.

N.B. MINIMUM ORDER VALUE AND SPECIAL DELIVERY CHARGES MAY APP
Cost : £ 14.69

42 DRAWER CABINET. HXW 940X920 DRAWER DEPTH 390MM - GREY/GRN >Manufactured form 1 and 1.2mm steel sheet.
>Seam and spot welded.
>Each drawer supplied with self-adhesive label holder.
>Overall Cabinet depth
drawer depth 190mm = cabinet depth 270mmm.
drawer depth 290mm = cabinet depth 370mmm.
drawer
Cost : £ 582.15

100 BRASS R/HD S/SCREW 1.1/2X6 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws.
--
Cost : £ 3.44

PK 10 LACQUERED RECTANG. CANS WXDXH 178X111X292MM. 5.0LTR. > Most sizes available with either a plain or lacquered internal finish.
> Internally lacquered cans ideal for the storage of water based products.
> Height specified is height of can excluding neck.

Rectangular Cans :
Refs. 143T006N-149T0
Cost : £ 41.13

16MM S.S. FOUR LEG CHAIN SLING 1M EWL > Chain hooks c/w safety catch.
> Test certificate supplied with each sling.
> Standard length 1 metre EWL.
Cost : £ 2842.33

LIGHT DUTY KEYBENCH.VINYL. WXD 1500X600MM. Workbenches
> Ideal packing bench or for light assembly work.
> Solidly constructed from 16 and 14 swg sheet and square tube sections.
> Adjustable plastic insert feet.
> Full range of cupboard and drawer accessories.
> Standard height: 840
Cost : £ 255.27

STACKING WORK PAN - HXWXD 305X610X455MM > Choice of Stacking or nesting pans.
> Spot welded galvanised steel.
> Reinforced rim.
> Half-lift handles.
> Capacity: 25kg.
Cost : £ 20.56

OMAS TURBO CONVECTOR HEATER - BLACK. HXWXD 430X680X180MM. > Adjustable thermostat control.
> Power selector.
> Antifreeze device.
> 2kW power consumption.
> Available in either black or white.
> HxWxD: 430x680x180mm.
Cost : £ 55.81

WHITE PACKING FOAM. ROLL LXW 300M X 750MM (PER 2) 5+ PKS > Dust and lint free.
> Water resistant and non-abrasive.
> Choice of standard white foam or heavy duty
blue with extra thick ribbing.
Cost : £ 67.56

INSULATION TAPE AST/COLOUR BOX Supplied complete with rolls of Expert Quality PVC self-extinguishing flame-resistant insulation tape (to BS3924/BS4J10 Specifications). Eight rolls of each colour. --
Cost : £ 28.67

Littainer 50 Bags TOILET TISSUE SYSTEMS / WASHROOM
Cost : £ 69.91

M10X95 - SHIELD ANC.STUD (5) Ideal for high load situations. Expansion arms and ‘grip tips‘ give excellent holding power. A spanner can be used to ‘torque up‘ for maximum security. Carbon steel with passivated finish. Packed in polybags of 5 (approx.) anchors. --
Cost : £ 4.61

WORKBENCH WITH LOWER SHELF. LAMINATE SURFACE. 1800X900MM > 1mm laminate on 18mm MDF with a wooden edge.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Standard height: 840mm.
> Bench HxWx
Cost : £ 481.57

INT. VEHICLE FLEXIDOOR HXW 2800X5500MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 767.28

CARBON BALL TRANSFER UNIT. BALL DIA 38MM. CAP 110KG >A simple and inexpensive method of moving many types of load.
>Load is supported through the centre of unit.
>Unique anti-friction devices provide instant directional change.
>Ball units consist of a large ball seated on a number of smaller ball
Cost : £ 14.69

PACK 2 63MM PROVENCE KNOBS C/W M10 THREADED SHANK. 6+ PACKS Can also be used in through hole version as the closure cap can be removed. Excellent impact resistance thanks to its polyamide composition reinforced with 30% glass fibre.
Cost : £ 5.11

STEEL/POLYURETHANE TYRE PALLET ROLLERS W/OUT BEARINGS. 75MM --
Cost : £ 16.45

WHITE PLASTIC MINI BOX DISPENSER > Secure lockable box.
> Totally protected towels.
Cost : £ 27.03

VDU DESK 720X1600X800MM. LIGHT OAK > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 141.0

HEADED GLASS CASE. 1064X696MM (PORTRAIT) - BLACK >Completely weatherproof so suitable for interior or exterior use.
>Attractive and very durable stainless steel construction.
>Will also hold small/slim objects in addition to notices.
>Toughened glass for strength and safety.
>Full length hin
Cost : £ 943.53

ROLL PINK ANTI-STATIC BUBBLE WXL 1500MM X 100M. 5+PKS > Sutiable for use with electrical products.
> The perfect protection for circuit boards and where electrical components may need to be laid bear.
> Flexible.
> Offers greater protection.
> Bubble size 10mm.
Cost : £ 31.73

STAINLESS STEEL REPLACEMENT WORKSURFACE - 1800X900MM 18swg stainless steel (3042B) bonded to 18mm MDF with turned down welded corners
Cost : £ 264.02

GALV ROPE GRIP - 2MM DIA > Wire rope manufactured to current British standards.
> Test certificate can be issued to show sample breaking strain.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 1.53

HAND CRANKED HOSE REEL - HXWXD 480X430X500MM - ID/OD: 10/19MM > Designed for industrial applications
where longer lengths of hose are
required.
> Constructed in black heavy duty powder
coated steel.
> Adjustable drag brake.
> Full flow 90? swivel assembly.
> Open hose slot drum design.
> Remo
Cost : £ 139.83

HIGH SEC.LAMINATED P/LOCK 40MM Draper Security Rating: 4
Laminated steel body with hardened steel shackle. Precision pin tumbler and brass cylinder. Special cover to prevent damage to locked item. Supplied complete with two keys. Key blanks are available. Display packed.
* Except
Cost : £ 4.08

Rectangular Magnifier ">110mm spring balanced arm provides ease of movementwhilst maintaing set position.
>Large 8"" x 6"" lens with 3 diopter magnification (1.75x)offers a large viweing field.
>2 x 9 watt compact fluorescent tubes provide high quality light over viewing
Cost : £ 189.18

MOBILE PEDESTAL. C/W 1 FILING + 1 BOX DRAWER. COFFEE/CREAM > Filing drawers are fitted with cradle to accept A4 or foolscap.
> An interlocking drawer selection mechanism (anti-tilt) prevents a second drawer opening whilst one is in use.
> Stylish curved drawer handles for ease of use to extend drawers.
>
Cost : £ 191.82

WHITE COATED STEEL NET SUPPORTS - PER 4 > Detachable continental supports.
> Choice of steel or white coated steel.
> For senior or junior steel posts.
> Four per set.
> Supplied complete with fixings.
Cost : £ 135.54

HOLLOW WIRE CUP BRUSH 75X6MM Tightly packed brassed crimped steel wire with 6mm diameter shank. Display packed. --
Cost : £ 3.03

PLUMB BOB 130GM STEEL Accurately machined steel plumb bob with corrosion resistant plating and brass screw cap. Weight 130g. (approx.). Display packed. --
Cost : £ 2.7

SPRING CLAMPS 2X25MM SET PCKD Set of general purpose pressed steel clamps with plated finish. Incorporates heavy duty spring. Display packed. --
Cost : £ 1.69

GRP GATEHOUSES WXLXH 2400X2400X2300 AS SPECIFIED > Manufactured in glass reinforced plastic from a single moulding without joints.
> Fully insulated with high density CFC free polyurethane foam.
> Interior finished in washable fire retardant textured coating.
> Floor - insulated 3mm ribbed rubb
Cost : £ 4819.85

300MM FLAT FILE-SMOOTH (6) Manufactured in accordance with BS498:1990
Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 22.04

PACK OF 10 FUSED PLUGS - WHITE >13A.
>'Easy grip' plugs constructed from resilient moulded nylon.
>Colour: white or black.
Cost : £ 8.75

TRANSMISSION JACK Suitable for lifting and lowering gearboxes and differential units. The scissor-type design provides precise movement allowing the user to accurately manoeuvre and fit the transmission assembly. Four heavy duty swivel castors provide flexibility of moveme
Cost : £ 103.07

RECOIL AIR HOSE 11.5M X3/8 BSP Hoses manufactured to BS5409 Specification.
Recoil type air hose which allows good access to working areas. For the workshop and industrial user. Supplied complete with spring protection guards and 360° swivel end fittings. Display packed.
S
Cost : £ 48.42

PK OF 10 BLACK SPHERICAL KNOBS 32MM DIA. X M8 THREAD. QTY 6+ --
Cost : £ 4.35

8MM 6X19 FMC 1 LEG WIRE ROPE SLING 2M EWL > 6 x 19 construction wire rope to British standards.
> Strops with eye each end.
> Slings supplied as standard with safety hook. shackle can be fitted at extra cost.
> Stamped with serial number and WLL.
> Safety factor 5 to 1.
> Test cert
Cost : £ 32.49

10L TIN CAN C/W FOLDING HANDLE Tin. Folding handle.
Sheet metal base.
Cost : £ 38.19

GARDEN SAW (KEPHOS BLADE)400MM This unique saw has been specially designed for cutting and pruning large or small branches. The hardened and tempered Sheffield steel blade has fine teeth for starting cuts and M shaped teeth for fast wet wood cutting. The blade is coated in black ‘
Cost : £ 7.68

FIXINGS WITH TWO THREADED RODS PK OF 5.DEFL.2.0MM QTY: 5+ --
Cost : £ 10.22

RUBBER TYRED SHEET TROLLEY. O/A HXW 1230X590MM > Load capacity: 300kg.
> O/A HxW: 1220x590mm.
> Handle length: 1180mm.
> Platform LxW: 500x200mm.
> Wheel diameter: 200mm.
Cost : £ 161.03

ALUMINIUM FRAMED BENCH LXD 1500X750MM > Range of high quality stainless steel benches and tables for environments requiring high standards of cleanliness and hygiene.
> Standard working height: 830mm. 900mm working height available on request.
> Worktop: 1.5mm thick Grade 304 stainless
Cost : £ 504.19

100 GOLDSCREWS C/SUNK 6.0X100 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Deep cut 40° lubricated angle threads for fast driving especially in chipboard and MDF. Case and through hardened to prevent snapping. 25° point requires no pre-drilling. Yel
Cost : £ 4.95

WELDERS SCRATCH BRUSH 250MM Expert Quality heavy duty wire brush designed primarily for cleaning metal prior to welding or removing slag after a weld has been made as well as other brushing applications. The 0.35mm diameter brassed steel wire fill is securely held in a heavy
Cost : £ 2.49

SERVING TROLLEY WITH 3 SHELVES > Frame with double high finish chromium push bar.
> Beech finish shelves.
> Shelf dimensions: 750x420mm.
> max. load capacity 200kg.
> Height:970mm.
> Supplied for self assembly.
Cost : £ 265.55

CUSHION TYRED WHEEL WITH STEEL CENTRE -WHEEL DIA 330MM -PLAIN --
Cost : £ 23.5

10 x bags to suit ref 268K011N COMPRESSED AIR VACUUM CLEANERS
Cost : £ 11.81

7MM GRADE T 1 LEG CHAIN SLING SAFETY/CATCH 2M EWL > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 86.95

200 BRASS R/HD S/SCREW 3/8X2 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws.
--
Cost : £ 1.23

DOCK BOARD. O/A WXL 1520X910MM CAPACITY 5450KG > Anti-slip tread plate - design keeps edges flush with dock or truck during loading/unloading operation.
Safety side curbs fitted as standard.
Cost : £ 754.35

Piano Skate > Load capacity: 250kg.
> Tubular steel framework.
> 4x80mm diameter wheels with rubber cushion tyres.
> Heavy duty rubber strip each end for protection of load.
> O/A LxWxH: 620x460x250mm.
Cost : £ 192.7

EXTENDING CRANE JIB. TRUCK CAP 3500KG. FORK SPREAD 546MM > Instant drive-in fitting by one man.
> Positive fixing behind fork heels. Fitt
Cost : £ 1081.0

COMFORT BACK FOLDING CHAIRS + LINKING DEVICE.BLUE/GRY. PER 4 >All steel chair with comfort polypropylene back.
>Seat height: 460mm.
>Width: 463mm.
>Chairs fitted with linking device.
Cost : £ 143.35

100L GRY/GRN FRONT OPENING BIN 965X525X525MM > 4 large apertures enables easy disposal of litter.
> Front door opening aids access to self-locating liner.
> HxWxD: 965x525x525mm.
N.B. Please specify colour when ordering.
Cost : £ 337.23

STANDARD BENCH. LINO WORKSURFACE. LXW 1200X900 FEATURES OF RANGE:
Workbenches
? Sturdy heavy duty framework benches.
? Full range of cupboard and drawer accessories (see facing page). Can be installed on left or righthand side benches.
? Standard height 840mm (750 or 900mm avaialbe on requ
Cost : £ 416.19

LEVER MORTICE LOCK STANDARD RANGE TYPE 2277 CHROME FINISH > Union type 2277.
> 3 lever.
> Deadbolt locked or unlocked by key from either side.
> Pierced to accept through furniture.
Cost : £ 18.8

PDQ ADD ON BENCH. HXWXD 915X600X450MM > Full width 18mm chipboard worksurfaces.
> 300kg undistributed working load for worktop.
> Complete with metal footplates and full assembly instructions.
> Supplied flat packed for self-assembly.
> Ideal for use with all benches for additiona
Cost : £ 50.29

100L GRY/GRN OPEN TOP BIN. HXWXD 1100X420X420 >Lockable hinging collar with large aperture for easy litter removal.
>HxWxD: 1100x420x420mm
NB please specify colour when ordering.
Cost : £ 270.25

FULL DEPTH ALUMINIUM LOWER SHELF. LENGTH 1500MM > Selection of optional accessories which adapt the standard bench to suit your individual requirements.
Cost : £ 120.09

TRIMMINGKNIFE BLADES HOOKD 5PC > Reversible polished steel blades with accurately ground cutting edges.
Cost : £ 1.0

Small European Standard Containers Accessories - Label Holders for Euro Containers
Cost : £ 3.06

RIGHT HAND SINGLE DRAWER UNIT TO SUIT NON-STEEL TOPPED BENCH >Range of optional accessories which adapt any of the popular models to suit your individual requirements.
>All accessories are finished in grey epoxy paint.
>Sliding door unit not suitable for 760mm high benches
Cost : £ 88.65

Swivel K90 SERIES EXPANDING PLUG FITTING
Cost : £ 11.52

K165 SERIES - PK 8 ADJUSTABLE FEET WITH FIXED STEM. 30MM DIA > Adjustable feet - with fixed or tilting stem.
> Threaded sockets - for fixing feet into tube.
> Blank sockets - to neaten tube ends.
Cost : £ 4.82

WHITE/RED FREESTANDING SQUARE CHAIN POST. O/A H 900MM > Free standing post with 300x300mm square folding steel base
> 50mm diameter steel tube.
> Buttonhole type slots to support chain.
> Supplied with coloured stickers to make up the stripes.
Cost : £ 58.75

PK 2000 STANDARD PROTECTIVE PROFILES.35X24MM.QTY 1-4 BOXES > Manufactured from polyethylene.
> Available in standard and medium duty grade. Open and closed corners ideal for furniture protection.
Cost : £ 32.9

13MM DIA GRADE T 3 LEG CHAIN SLING C HOOKS 2M EWL > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 527.58

SUCTION DENT PULLER 118MM Thick rubber pad with plastic handles. Display carton. --
Cost : £ 2.89

25 MACHINE SCREWS CSK M5 X 50 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Zinc plated. Packed in polybags of 25 (approx.) screws.
*Pozi/Supadriv are registered trademarks of European Industrial Services Ltd. --
Cost : £ 0.92

Pages : 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26