520ML `CRC ZINC' SPRAY. 12+ OFF This is a galvanising zinc-rich (> 98%) coating. It prevents the formation of rust and provides long term protection for all types of ferrous metals against aggressive external factors. In areas where galvanised surfaces have been damaged or modified by d
Cost : £ 7.52

Warning Post and Chain > Additional/replacement components.
> Hooks to connect lengths of chain.
> Links to reconnect broken chain.
> Replacement base and top cap. Extra components
Cost : £ 21.74

Hydraulic Drum Mover Capacity 400kg.
> Will handle both steel and plastic drums.
> For loading and unloading drums from pallets.
> Lowering by hand release for controlled descent.
> Lift from the ground onto a pallet with ease.
> Top quality hydraulics fitted w
Cost : £ 893.0

COMFORT MASK FILTER SET 5PC Comprising one mask with five filters and sanitary face cloth. For protection against non toxic dusts and powders. Suitable only to reduce discomfort caused by exposure to coarse non-toxic particles where the concentration of the particles does not exceed
Cost : £ 1.32

MOBILE PEDESTAL C/W 3 BOX DRWS 420X540X520MM. BLACK > Filing drawers are fitted with cradle to accept A4 or foolscap.
> An interlocking drawer selection mechanism (anti-tilt) prevents a second drawer opening whilst one is in use.
> Stylish curved drawer handles for ease of use to extend drawers.
>
Cost : £ 191.82

FOLDING TABLE JUNIOR/PRIMARY L1520XW685XH635MM AUBURN TEAK > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 227.95

ROUND METAL PAPER BIN. CAP 15L GREY > Steel body with galvanized steel bottom and lip.
> Hxdia.: 330x270mm.
> Capacity: 15 litres.
Cost : £ 7.23

THUMB LATCH 255MM Handle with thumb lever for self latch release. Suitable for left or right handed opening gates and doors. Detailed instruction sheet included. Heavy gauge steel with black epoxy finish for rust protection. Supplied complete with fixings. Display packed.
Cost : £ 6.51

10MM 6X19 FMC 4 LEG WIRE ROPE SLING 2M EWL > 6 x 19 construction wire rope to British standards.
> Strops with eye each end.
> Slings supplied as standard with safety hook. shackle can be fitted at extra cost.
> Stamped with serial number and WLL.
> Safety factor 5 to 1.
> Test cert
Cost : £ 123.43

PACK OF 5 PAINT BRUSHES. 19MM > Pure bristle paint brushes.
> Square out ends held in stainless steel ferrule.
> Painted hardwood handle.
> Display packed.
> Available in 8 widths.
Cost : £ 3.7

SET OF 100 RUBBER INSERTS -- -- Type A Rubber inserts
Cost : £ 11.57

SHELF CLADDING SUPPORTS -SWL 2600MM - FRAME DEPTH 900MM >For use between two beams to support shelving material or irrgularly shaped objects.
Cost : £ 8.46

FORK LIFT ATTACHMENT TO SUIT REFS 1016556 & 1016568 > Suitable for models ITM45/60. Fork lift attachment
Cost : £ 491.15

PACK OF 12 ROLLS CLEAR STATIONERY TAPE - WIDTH 19MM > Ideal for general office use.
> Light duty.
> Easy to tear.
> Roll length: 66 metres.
> Supplied in packs of 12.
> Desk dispenser also available.
Cost : £ 5.88

ROPE GRIP GALV 6MM DIA > Wire rope manufactured to current British standards.
> Test certificate can be issued to show sample breaking strain.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 0.65

Web Prowler Mouse >Incorporates 5 programmable buttons with scroll wheel.
>USB/PS/2 connectivity.
>Gel type material housing for an extra comfortable grip during prolonged use.
>Includes software.
Cost : £ 32.31

Wall Buffer > Install as single unit or end-to-end in a continuous run.
> LxWxD: 3000x250x45mm.
> Deep channels in the coulding are pre-drilled to accommodate fixing bolt heads and avoid risk of damage to vehicles. N.B. Fixings not supplied.
> Weight: 12kg.
Cost : £ 153.93

10 DRAWER CABINET. HXW 940X920 DRAWER DEPTH 190MM - GREY/RED >Manufactured form 1 and 1.2mm steel sheet.
>Seam and spot welded.
>Each drawer supplied with self-adhesive label holder.
>Overall Cabinet depth
drawer depth 190mm = cabinet depth 270mmm.
drawer depth 290mm = cabinet depth 370mmm.
drawer
Cost : £ 343.28

ADJUSTABLE WRENCH WITH CAP LENGTH 215MM - OPENING 26MM >The mobile jaw slides inside the fixed head with insulating cap.
>Insulating cap under the head for opening and closing jaw.
Cost : £ 65.21

230MM GRINDING DISC. > To suit the above machines.
Cost : £ 3.88

Universal Table Truck >Designed to eliminate storage problems and enable easy transportation.
>Stores up to 12 tables of any shape.
>Heavy duty polyurethane swivel castors. Two locking.
Cost : £ 461.95

RUBBER TYRED WHEEL WITH STEEL CENTRE DIA 455MM --
Cost : £ 95.76

COMFORT PLUS BUMP CAP - GREEN > Moulded high density polyethylene.
> Fitted with adjustable inner harness and sweatband.
> Four point webbing suspension harness.
> Kitemarked and tested to EN 812.
Cost : £ 5.93

Individual Cabinets The range of Key knockdown benches can be complemented by the addition of extra suspended cabinet and cupboard units. -- 5 Drawer Unit
Cost : £ 470.82

'Taktyle' Braille Signs >Manufactured and moulded matt finish plastic to prevent reflection.
>Patented locating ring - guides the hand to the centre where the information can be easily found.
>Smooth contour lettering and pictograms.
>Self adhesive backing for instant f
Cost : £ 24.09

`SCOTCH 35' WHITE VINYL TAPE. >These tapes can be used for all types of cable insulation and marking applications.
>Very good resistance to ageing.
>Dielectric strength: 45 kV/mm
>Adherence: 2.5 N/cm
>Usage temperature: 0?C to +80?C
>Thickness: 0.18 mm
Cost : £ 6.46

GREEN LINE SPRAY PAINT. 500ML PER 12 > Automatic positioning of the spray paint canister.
> Extra heavy front for stability and applying perfectly straight lines.
> Adjustable line indicator.
> An edging device for effortless marking close to walls and racks.
> Can be adjusted to
Cost : £ 128.96

EXTRA PER 1/2M 4 LEG WIRE ROPE SLING - 6MM DIA > 6 x 19 construction wire rope to British standards.
> Strops with eye each end.
> Slings supplied as standard with safety hook. shackle can be fitted at extra cost.
> Stamped with serial number and WLL.
> Safety factor 5 to 1.
> Test cert
Cost : £ 2.41

3/8''BSP SCREWED TAIL/PCE MALE 3/8“ thread size with BSP taper. Sold loose. --
Cost : £ 1.18

BOTTOM SHELVES SYSTEM 600 WORKBENCHES - continued
Cost : £ 54.11

MITRE/CORNER CLAMP 90 DEGREE Diecast body with two cramp jaws set at 90°. Plated screws with large non-rotating cramp plate. Body is drilled for bench mounting. Display packed. --
Cost : £ 6.32

10 X 400MM MASONRY DRILL PCKD --
Cost : £ 4.08

"SLIM WARDROBE CUPBOARD. O/A HXWXD 72X24X18"". LIGHT GREY" > All steel riveted/welded construction.
> Semi-concealed hinges for security and clean line appearance.
> Rubber grommets fitted for secure door fit and quiet operation.
> Doors fitted with stiffeners for added strength and security.
> Metal
Cost : £ 217.55

AUTO RETRACT TRIMMING KNIFE Retractable pattern complete with a two notch blade which retracts automatically when released. Manufactured from diecast zinc alloy with blue enamelled finish. Display packed. --
Cost : £ 2.27

PACK 100 A4 COMBS 12.5MM DIA WHITE > Combs are supplied in packs of 100.
Cost : £ 15.86

LINE CHALK-YELLOW 115G (4OZ) Plastic bottles of fine chalk for use with Draper and other manufacturers chalk lines. Supplied with funnel for filling. Three colours available. Display packed. --
Cost : £ 1.18

PACK 10 STEEL M4 KNURLED SCREWS. QTY 6+ PACKS --
Cost : £ 13.75

INT. VEHICLE FLEXIDOOR HXW 4400X4500MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 857.75

PK 5 HARDBOARD COVERS. WXD 1000X600MM > Capacity per shelf - 150 kg.
> Shelves are adjustable in increments of 50mm on uprights.
> Colours:
shelves - grey epoxy finish.
> Pack of 2.
Cost : £ 21.74

EXTRA CHAIN PER METRE. 19MM > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 48.76

1000KG GEARED TRAVEL TROLLEY. TRACK WIDTH 140-120MM Travel Trolleys
> Push or hand geared models.
> Track widths from 50mm to 305mm.
> Precision machined runners.
> Maintenance free sealed ball bearings.
> Meets all EU directives.
> Test certificate supplied.
Cost : £ 183.3

BAG NECK-SEALER. 25MM BENCH BUNDLER. Light duty metal model
> Accepts all non-reinforced tapes up to 12mm wide on 75mm diameter cores.

Heavy duty metal model
> Wide throat model designed to take heavy duty plastic bags.
> Accepts up to 12mm wide tape.
Cost : £ 21.74

SHELF CLADDING SUPPORTS - SWL 2177LBS - FRAME DEPTH 1100MM >For use between two beams to support shelving material or irrgularly shaped objects.
Cost : £ 9.05

ROPE GRIP - 11MM DIA > Wire rope manufactured to current British standards.
> Test certificate can be issued to show sample breaking strain.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 2.88

10MM DIA S.S. ENDLESS CHAIN SLING 2M CIRC > Chain hooks c/w safety catch.
> Test certificate supplied with each sling.
> Standard length 1 metre EWL.
Cost : £ 260.85

15 TREAD HEAVY DUTY PLATFORM STEPS. O/A HT 4.30M > Aluminium heavy duty mobile work platforms ideal for warehousing and storage environments.
> Fitted with large platform (600x480mm) and toeboards on three sides 150mm high.
> For extra loading capacity also fitted with bottom shelf 900x650mm.
>
Cost : £ 934.13

Glass protection Nozzle To suit Hot air gun reference 1016635
Cost : £ 2.82

DACRON FILTER BAG(DE1030/1045) For use with all Draper Dust Extractors. Sold loose. --
Cost : £ 29.83

PACK 5 125MM METAL CUT DISCS Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade A30-S-BF 80 medium hard. Maximum working speed 80m/sec. Packed 5 wheels per display pack. --
Cost : £ 9.71

5 ROLLS SMALL BUBBLE ROLL WXL 300MM X 100M > Small bubbles are more versatile.
> Transparent.
> Heat sealable.
> Bubble size 10mm.
> Premium bubble flim offers a greater puncture resistance for odd shaped items as well as retaining air over a long period of time.
Cost : £ 37.01

WALL RACK 12XA5 PORTRAIT. > Plastic coated wire racks with bracket for wall mounting (fixings not supplied).
> Compartment depth: 20mm.
Cost : £ 29.38

STACKING WORK PAN - HXWXD 230X455X455MM > Choice of Stacking or nesting pans.
> Spot welded galvanised steel.
> Reinforced rim.
> Half-lift handles.
> Capacity: 25kg.
Cost : £ 13.75

PK OF 10 BLACK SPHERICAL KNOBS 45MM DIA X M10 THREAD --
Cost : £ 10.46

GENERAL PURPOSE HANDSAW 255MM Straight back saw with hardened and tempered bright steel lacquered blade. The hardened teeth require no sharpening or setting. The strong six positional handle is designed for maximum grip and comfort. Display packed. --
Cost : £ 7.37

Collapsible Parking Barrier > Stainless steel moving parts.
> Can be padlocked in lowered or upright position (padlock not supplied).
> Pre-drilled for ground fixing. Requires 4xM10 foundation bolts (not supplied).
> O/A HxW: 700x670mm.
> Lowered height 60mm.
> Finish
Cost : £ 109.28

ZINC/ALUMINIUM DIBBER Diecast with pointed end with ‘L‘ shaped handle. Designed to give maximum torque and operator comfort. Planting depth 210mm. Display packed. --
Cost : £ 2.61

RATCHET TORQUE WRENCH 3/8''DR Reversible ratchet head. The Nm and lb-in scales are engraved on the barrel of the wrench. The micrometer type sleeve allows accurate preset torque values to be set. When torque is reached the wrench produces an audible click and a slight release of tensi
Cost : £ 22.62

PERFECT BOOK CABINET TYPE 4265 > With partly adjustable shelves.
Cost : £ 101.64

INITIAL BAY CLOSED MISTRAL SHELVING.WXHXD 1000X2230X450MM > Slim side wall upright allows full width of the shelf to be accessed.
> All units supplied with 6 shelves.
> Slim profile shelf allows maximum use of the unit height.
> Shelves are adjustable on 25mm increments allowing full flexibility in shel
Cost : £ 192.94

TYPE D - ZINC WIRE SINGLE BAS- KET. WXDXH 580X400X250MM. > Constructed from welded steel wire.
> Provide all round identification of contents.
> Freestanding - designed to stack firmly one on top of the other.
> Self stacking - no bolts required.
> Full depth wire dividers.
> Finish: Bright zinc.
Cost : £ 22.33

Surge Protectors >Entry level products giving above average protection.
>Metal housing with rubber end bumpers.
>Power & protection indicators.
>4 or 5 outlets per strip.
>Joule rating for protection. 180-1110 joules on power lines.
>EMI/RFI noise filterin
Cost : £ 21.74

Football Goal Nets > Conform to BS EN 748.
> Manufactured from polythene.
> Colour: white.
> 1m roof.
> 3m run back.
> Two per set.
> Suitable for continental net supports. Junior Nets
Cost : £ 75.79

BROAD RIB MATTING -1200MM WIDE PER LINEAR METRE - BROWN > Available in rolls or cut lengths.
> Excellent impact and sound absorbency.
Cost : £ 92.83

12 X 400MM MASONRY DRILL PCKD --
Cost : £ 4.58

16MM S.S. DOUBLE LEG CHAIN SLING - 1M EWL > Chain hooks c/w safety catch.
> Test certificate supplied with each sling.
> Standard length 1 metre EWL.
Cost : £ 1392.38

"DIVIDER. SHELF DEPTH 18"" DIVIDER HEIGHT 15""" > Spring clip fitting.
> Sizes are shelf fixing centres
- not clearance.
Cost : £ 8.05

Swivel + brake K90 SERIES EXPANDING PLUG FITTING
Cost : £ 17.63

Retractable Welding Curtain > Permanent curtain which can be quickly moved aside for ease of access.
> Manufactured from anti-glare PVC. Supplied in sections HxW: 1800x1300mm c/w hanging rings and press studs for connecting lengths.
> Curtain hangs on 4mm dia. wire which runs
Cost : £ 307.85

CLOTH FILTER FOR WDV8 --
Cost : £ 3.25

2 spare lamps for Mini Maglite AAA Accessories / MAGLITE TORCHES
Cost : £ 5.05

FIXINGS WITH TWO THREADED RODS PK OF 5.DEFL.2MM. --
Cost : £ 10.22

Truck with standard wheel configuration MESH CONTAINER TRUCK
Cost : £ 246.22

CUT/WHEEL-STONE.230X3.0X22.2MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade C30-S-BF 80 medium hard. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 1.72

"4 SHELF STARTER BAY - SHELF DEPTH 15"" - OPEN ALL ROUND" > Four and six shelves.
> Standard or heavy duty.
> Choice of 3 shelf depths.
> Initial Bay and Add-on bays.
> Supplied with black plastic feet.
> Standard HxW: 72x36.
Cost : £ 128.9

PK OF 2 WHITE LONG KNOBS 35MM DIA. THREAD INSERT. QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 14.1

Stainless Steel Ash/Litter Bin > Manufactured from bright polished stainless steel.
> Specially designed to complement most interior decors.
> Durable and easy to maintain.
> Litter openings have folded safety edges.
Cost : £ 81.25

1000KG GEARED TRAVEL TROLLEY. TRACK WIDTH 210-305MM Travel Trolleys
> Push or hand geared models.
> Track widths from 50mm to 305mm.
> Precision machined runners.
> Maintenance free sealed ball bearings.
> Meets all EU directives.
> Test certificate supplied.
Cost : £ 202.1

OPEN SIDE & TRANSPARENT DOOR CONTAINER. 400X300X319MM. 30L > Open front for display and easy access to the stacked containers.
> Transparent doors for added protection to contents.
> Label area for identification of contents.
> Door opens outwards.
> Modular dimensions to optimise storage.
> Colour
Cost : £ 21.15

10MM DIA S.S. DOUBLE LEG CHAIN SLING 1M EWL > Chain hooks c/w safety catch.
> Test certificate supplied with each sling.
> Standard length 1 metre EWL.
Cost : £ 665.05

DOCK PLATE. WXL 1220X1220MM CAPACITY 1020KG > Anti-slip tread plate - design keeps edges flush with dock or truck during loading/unloading operation.
Fitted with - safety locking legs and side handles as standard; red safety lane markers on both sides of plate.
> Optional extra - plate fitted
Cost : £ 508.78

TIMBER PALLET 2-WAY NON-REV 100X1200MM >1 tonne capacity
> Home grown softwood deckboards.
> English hardwood bearers.
> Fixings: annular ring shank nails.
> Entry is always on 1200mm long sides.
> N.B. Leading bottom boards can be through chamfered at additional cost.
Cost : £ 22.85

3/16''PARALLEL PIN PUNCH 8''LO Long pattern with extra long 90mm parallel drive. Display packed. --
Cost : £ 2.03

Football Grass Pitch Anchors > Heavy duty plated U shaped steel peg.
> Simple to use.
> Manufactured from 10mm diameter solid steel bar.
> 450mm long.
> Supplied per set of 4.
Cost : £ 30.55

Humidifiers > Warm and cool mist humidifier.
> Suitable for rooms up to 70 sq meters.
> Transparent easy fill 7ltr tank.
> Air flow 430ml/hour.
> Running time 16.5 hrs.
> Automatic humidity control.
> Digital display.
> Timer.
> Weight: 3.5kg.
Cost : £ 111.92

PLAIN BEARING POLYPROPYLENE WHEEL. WHEEL DIA 63MM --
Cost : £ 1.59

NESTING WORK PAN - HXWXD 305X455X305MM >Choice of stacking or nesting pans.
>Spot welded galvanised steeel.
>REINFORCED RIM.
>half-lift handles.
>Capacity: 25kg
Cost : £ 12.46

GARDEN HOSE REEL CART Lightweight aluminium frame with tough plastic snap together parts. Flow through design with 1/2“ hose connector and deep reel to prevent kinking when winding hose. Holder for accessories and gardening tools. Reel holds approximately 60 metres of 12m
Cost : £ 35.27

OPTIONAL BLANKING PLATE FOR 1/2 CONTAINER > Range of optional extras to suit Gastronorm containers.
> Ladle notch - extra price per lid. Must be ordered at same time as container and lids.
Cost : £ 18.8

SUPPORT BAR - 530MM > Range of optional extras to suit Gastronorm containers.
> Ladle notch - extra price per lid. Must be ordered at same time as container and lids.
Cost : £ 8.46

MDF TOP WXD 1500X915MM - > Range of replacement worksurfaces.
> In many situations a workbench frame remains usable whilst the worksurface has deteriorated and needs replacing or upgrading.
> 18mm MDF with wooden edge sealed with clear polyurethane varnish.
Cost : £ 166.85

S.S WALL TABLE. HXWXD 850X650X 600MM. > Worktops are manufactured from 1.5mm (16swg) grade 304 stainless steel. Supported by an
underframe constructed of 2mm (14swg) grade 430 stainless steel.
> All units have 65mm downturns with safety returns.
> Wall units have a 65mm upstand and r
Cost : £ 319.6

TROLLEY Set comprises:
> A - Treatment couch with adjustable headrest.
> B - Polyester filled pillow.
> C - Scarlet cotton blanket.
> E - Workstation with lockable drawers and doors. O/A HxWxD: 1200x915x457mm. Epoxy powder coated finish.
> F - 12lt
Cost : £ 166.97

100 SELF-TAPPERS PANHEAD 3/4X6 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Zinc plated. Packed in boxes of 100 (approx.) screws.
*Pozi/Supadriv are registered trademarks of European Industrial Services Ltd. --
Cost : £ 0.58

BANDSAW BLADE 2400MM X 3/8''X For all Draper bandsaws and other manufacturers similar machines. Display packed. --
Cost : £ 12.18

Drum cradle - For 210ltr Steel Drums > Drip tray to suit Refs. 1582 - 1585R037N.
> Capacity: 5 litres. Drip tray
Cost : £ 45.12

PK OF 2 YELLOW LONG KNOBS 25MM DIA. M6 THREAD INSERT. QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 12.34

Steel Drawer Units > Pack of 12.
> Suits Type A Drawers. Dividers for Type A Drawer
Cost : £ 5.7

SLIDING GLASS BOARDS A2 - HXW 631X465MM - SCARLET FELT >Smart bright polished silver aluminium frame.
>Contrasting felt background.
>Top of frame and glass front simply lifts to change notice or picture.
>Discreet operation helps to prevent tampering.
>Ideal for displaying duty rosters as easy to
Cost : £ 82.84

SOAKER HOSE 12MM BORE 15M LONG 12mm diameter perforated sprinkler hose designed to be laid permanently in garden borders to irrigate plants as required. Hose lays on or under the garden soil and water seeps through holes to irrigate the surrounding area. Supplied complete with a ½
Cost : £ 11.97

MEDIUM RIB MATTING 10M ROLL WIDTH X THICKNESS 1000X3MM > Available in rolls and cut lengths.
> Thickness: 3 or 5mm.
> Colour: black.
Cost : £ 85.19

REGATTA SHIELD SLEEVELESS JERKIN - MEDIUM - DARK NAVY > Padded polyester-cotton.
> High neck zip and studded flap fastening.
> Half elasticated hem.
> Two patch pockets with flap one side and zipped hand warmer pockets on the reverse.
Cost : £ 23.68

3 POSITION DESK CLUSTER + WORK TOP. DARK BLU/WHT BEECH FINISH >Innovative desk design leads to great floor space efficiency.
>Dividing shaped top screens provides privacy without isolation.
>Well planned environments encourage higher productivity and efficiency.
>FOC site survey and design survey available
Cost : £ 3313.5

Lita Halogen Floor Uplighter >Foot operated dimmer switch.
>Lamp: 300W Tungsten Halogen (supplied).
>Black/brass.
Cost : £ 41.71

100X6 MECHANICS S/DRIVER-PCKD Satin chrome plated chrome vanadium steel blades hardened and tempered with shot blasted tip. Some sizes have a hexagon bolster which enables extra power to be obtained by use of a spanner. Square matt black handles manufactured from high impact resistant
Cost : £ 2.17

BODY WORK LANCE (PW3000) --
Cost : £ 78.26

Yellow stop watch Stop watch to 1/100th of a second up to 30 minutes and to the second from 30 minutes to 24 hours. Total and split time display. Time and date function. Repetition alarm.
Button cell battery supplied.
Dim: 69 x 59 x 19 mm. -- Digital stop watch
Cost : £ 9.52

STEEL REPLACEMENT WORKSURFACE - 1200X750MM 16swg steel bonded to 18mm MDF with turned down and welded corners.
Cost : £ 153.4

POST FOR 1 CYCLE. SURFACE FITTING. > 'U' shaped unit designed to hold cycle wheel.
> Suitable for standard or mountain type cycles.
> Welded galvanised steel construction.

Wall holder
> 90 angle unit - suitable for most situations.
> 45 angle unit - ideal for situations
Cost : £ 44.24

50W HI-SPOT LIGHT - 240V > Ref.291M023: 400mm goose neck arm.
> Ref.292M023: ultra bright light on 400mm good neck arm.
> Ref.293M023: low voltage spot with built-in transformer on 400mm goose neck arm.
> Ref.294M023: 240V 50W on 2 x 400mm goose neck arm.
Cost : £ 75.44

125MM SANDING DISCS PCK 5 G60 Fibre backed. 22mm bore. Display packed 5 discs per pack. --
Cost : £ 3.54

10MM KEYLESS CHUCK 1/2 X 20 For use with Draper Expert Rotary and Hammer Drills. Thread 1/2“ x 20UNF. Sold loose. --
Cost : £ 26.77

ROUND TELESCOPIC POST - BLACK - OPEN HEIGHT 610MM > Steel tube dia: 101.6mm
> Height above ground: 610mm (open).
> O/A length of unit: 795mm (closed).
> Outer body finish: hot dipped galvanised.
> Post finish: spray nylon.
> Supplied with padlock.
> Colour: red or black. Please specify.
Cost : £ 223.25

SURVEYOR SAFETY HELMET SLIP RATCHET. WHITE > Constructed from a UV stabilised high density polyethylene.
> Fitted with an internal 6 point suspension webbing harness and replaceable sweatband.
> Fitted with slip ratchet adjustable headband.
> Conforms to EN 397.
Cost : £ 12.93

SINGLE SIDED INITIAL BAY WALL PANEL. HXW 2000X1000MM > Bays can be single or double sided.
> Single sided racks can be converted to double sided by adding panels to opposite side.
> Start with an initial bay and add any number of additional bays.
> Available in 500 and 1000mm bay widths.
> Overa
Cost : £ 193.05

Swivel K90 SERIES EXPANDING PLUG FITTING
Cost : £ 13.51

NEOPRENE G.P RUBBER SHEETING 6MM THICKNESS. PER LINEAR MTR >A commercial grade of Neoprene/SBR blended general purpose sheeting with resistance to grease some inorganic chemicals and oils with good ageing and weathering charateristics. Working temperatures between minus 30 to plus 100 degrees C.
>Available in
Cost : £ 46.41

REDUCING BUSH 35MM -25MM BORE For use with Circular Saw Blades. Sold loose. --
Cost : £ 0.78

10 ROOFING BOLTS M6 X 40 Zinc plated finish supplied with square nut. Packed in polybags of 10 (approx.) bolts. --
Cost : £ 0.33

POST-FORMED LAMINATE WORKSURFACE. 1800X750MM >1mm grey laminaye bonded to 18mm MDF post formed one long edge. Plastic edges on back and two sides.
Cost : £ 178.6

PDQ ADD ON BENCH. HXWXD 915X900X450MM > Full width 18mm chipboard worksurfaces.
> 300kg undistributed working load for worktop.
> Complete with metal footplates and full assembly instructions.
> Supplied flat packed for self-assembly.
> Ideal for use with all benches for additiona
Cost : £ 66.04

INSPECTION MIRROR SOLID SHAFT Fully flexible head with mirror 55mm diameter to give good visibility in concealed areas. Plated finish with plastic grip. Display packed. --
Cost : £ 4.7

INT. VEHICLE FLEXIDOOR HXW 5200X2500MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 580.45

BRAD NAIL 40MM For use with Draper Nailer or Combination Nailer/Stapler and other manufacturers similar machines.
Sold in boxes. --
Cost : £ 7.59

2 DRAWER DESK END PEDESTAL - HXWXD 725X475X600MM - BEECH > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 182.13

Drumtaps > Metal tap with 3/4 pipe thread for dispensing both flammable and
non-flammable liquids.
> Push button control - automatic shut-off when button released.
> Fitted with anti-flame filter.
> Tap outlet has metal lip for suspending buckets or
Cost : £ 24.68

OIL FILTER WRENCH (130MM CAP) Heavy duty chain with tightening nut which can be operated with a 1/2“ square drive or 24mm wrench. Display packed. --
Cost : £ 3.14

1/2'' HOSE TAIL/ADAP.M100 Integral adaptor/tailpieces. Sold loose. --
Cost : £ 2.95

DOUBLE DOOR BASE UNIT C/W 2 DRAWERS/1 SHELF. 900X1000X500 Double door units
Cost : £ 472.76

610MM STEEL LOWER SHELF.WIDTH 1200MM. > Range of optional accessories which adapt any of the popular models to suit your individual requirements.
> All accessories are finished in grey epoxy paint.
> Sliding door unit not suitable for 760mm high benches.
Cost : £ 57.22

MINI TROLLEY WITH FILE HOLDER & BASKET. O/A 1080X400X640MM > Mini trolley ideal for the internal distribution and collection of post and other small articles.
> Shiny galvanised tubular steel finish.
> The shelves or baskets are adjustable to any height.
> Manufactured with 4 rubber swivel wheels 100x25m
Cost : £ 199.75

100 SET SCREWS - M6 X 40 Manufactured to DIN558
Zinc plated for corrosion protection. Packed in boxes of 50 or 100 (approx.) screws. --
Cost : £ 2.86

PK OF 2 BLACK LONG KNOBS 16MMM DIA M4 THREAD INSERT.QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 3.29

METRIC DEEP OFFSET RING SPANNER 8X9MM X 173MM LENGTH >Manufactured to DIN 838 specification.
>Ring end cranked at 15 degrees.
>Ring ends have 12 corners with special radius design giving added torque.
Cost : £ 4.64

RED ACRYLIC INTERNAL/EXTERNAL INDUSTRIAL MIRROR 500MM DIA. Acrylic
> Impact and shatterproof.
> No glass shards in the event of a breakage.
> Greater reflectability than glass.
> Unaffected by ultra violet light.
> Suitable for internal and external applications where there is little risk of fire.<
Cost : £ 173.9

PACK OF 12 ROLLS CLEAR POLYPROPYLENE TAPE. WDTH 49MM > Excellent adhesion properties.
> Impact resistant.
> Waterproof.
> Especially useful in cold conditions - will not dry out or crack.
> Roll length: 66 metres.
> Colour: brown or clear.
> N.B. Packs of one colour only.
Cost : £ 12.93

8''CHROME PLTD VIC.LEV.LOCK-PR Chrome plated brass handles supplied complete with follower bar and fixings. For internal or external use. Carton packed. --
Cost : £ 8.23

BRASS TAP CONNECTOR 3/4'' CAP. Display packed. --
Cost : £ 1.54

200MM ROUND FILE-SMOOTH (12) Manufactured in accordance with BS498:1990
Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 24.65

ZINC PLATED FRAMED TROLLEY C/W 2 SHELVES. 1150X460X890MM > Capacity: 150kg
> Shelves - height adjustable. Wipe clean plastic laminate covering.
> 125mm diameterpolyurethane tyred wheels with nylon centres.
Cost : £ 158.63

FULL TOOL PANEL 450MM HIGH FOR 1200MM BENCH Range of optional accessories.
Cost : £ 109.39

RECHARGEABLE BATTERY > Range of accessories to suit Refs. 228 - 230A156.
Cost : £ 113.39

MODESTY END PANEL. 2230X400MM > Slim side wall upright allows full width of the shelf to be accessed.
> All units supplied with 6 shelves.
> Slim profile shelf allows maximum use of the unit height.
> Shelves are adjustable on 25mm increments allowing full flexibility in shel
Cost : £ 31.73

BLOCKBOARD WORKSURFACE - WXD 1800X600MM > Range of replacement worksurfaces.
> In many situations a workbench frame remains usable whilst the worksurface has deteriorated and needs replacing or upgrading.
> 18mm blockboard with wooden edge sealed with clear polyurethane varnish.
Cost : £ 115.15

PACK 12 ROLLS BROWN VINYL TAPE WIDTH 38MM > Sticks immediately - no messing with water or glue.
> Burstproof - tightly seal and secure your packages.
> Tough and strong - made from strong PVC film.
> Colour: brown or clear.
> N.B. packs of one colour only.
Cost : £ 19.39

S.STEEL GLASTRONORM CONTAINER. TYPE 2/8 - DEPTH 150MM > Manufactured to a high standard using 0.8mm 304 stainless steel.
> No distortion on heating any size.
> No jamming during storage.
> Suitable for any application.
> Perforated containers are used in their own right as containers in a steam
Cost : £ 22.91

2 DRAWER TOOL CHEST Two drawer tool chest suitable for the storage of small hand tools. Piano hinged lid and sectioned top tool storage area. Manufactured from heavy gauge sheet steel. Both drawers lock when lid is closed. Clip type lock on lid and grab handles at both ends.
Cost : £ 81.08

CORNER POLE FLAGS - BLACK PER 4 > Nylon flags with sewn-in sleeve and ties.
> Size: 305x290mm.
Cost : £ 16.74

NY./W CASTOR-LOCK/BK. 40MM DIA 10mm diameter swivel plug fixing with brake. Internal use only on furniture etc. Sold in polybag with label. --
Cost : £ 0.8

QUICK RELEASE REVERSIBLE RATCHET. 3/8 DRIVE.LTH 200MM "> Expert Quality.
> Manufactured from chrome vanadium hardened steel.
> Polished chrome finish for corrosion protection.
> Fine 45 tooth ratchet with rotating forward/reverse selector and ""quick release"" mechanism for secure socket and accesso
Cost : £ 15.75

GEAR DRIVEN REWIND TAPE. LENGTH 100M > 13mm wide fibreglass tape.
> 3 speed gear driven mechanism winds in tape three times quicker than conventional tapes.
> Includes magnetic retainer.
> Plastic case with rubber grip.
Cost : £ 51.64

FREEWAY 2 DRAWER FILING CABINET. 730X482X600MM.ENG OAK >Lockable with handles.
>Fitted with drawer selector device
and height adjustable feet.
>All accept foolscap files.
N.B. two drawer side filing
unit also accepts A4 files.
>Supplied assembled.
Cost : £ 318.43

PK OF 2 BLUE LONG KNOBS. 25MM DIA. M6 THREAD SHANK. QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 12.1

STACKING WORK PAN - HXWXD 230X455X305MM >Choice of stacking or nesting pans.
>Spot welded galvanised steeel.
>REINFORCED RIM.
>half-lift handles.
>Capacity: 25kg
Cost : £ 12.63

HANDLE TOP FOR SLIM JIM HXWXD 70X520X290MM. GREY > For indoor or outdoor environments.
> Efficient size and shape for tight spaces.
> Colour-coded lids to encourage effective waste separation.
> Durable and crack resistant.
> Swing and funnel tops to keep waste out of sight.
> Ideal for h
Cost : £ 17.04

PK OF 2 BLUE LONG KNOBS 40MM DIA. M8 THREAD INSERT. QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 18.8

6M LENGTH CHAIN Chains and Fittings
Cost : £ 34.66

"""EDET"" 2PLY MINI TOILET TISSUE (12 ROLLS PER CASE)" Quality soft tissue.
Available in recycled material.
Labour saving.
Cost : £ 31.14

SIDE OUTLET TEE TUBE CLAMP. TYPE A For use with galvanised steel tube.
Match tube clamp type with tube type for an exact fit.
Fitted with hexagonal screws.
Hexagonal keys and ratchet spanner available on request.

N.B. MINIMUM ORDER VALUE AND SPECIAL DELIVERY CHARGES MAY APP
Cost : £ 7.4

STAINLESS STEEL FRAMED BENCH LXD 1200X750MM > Range of high quality stainless steel benches and tables for environments requiring high standards of cleanliness and hygiene.
> Standard working height: 830mm. 900mm working height available on request.
> Worktop: 1.5mm thick Grade 304 stainless
Cost : £ 523.05

2M SINGLE LEG SLING WITH HOOK WITH SAFETY CATCH. 19MM CHAIN > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 428.88

Air Operated Bulk Greasers > Fits standard 12.5kg grease kegs.
> Continuous high pressure greasing at the squeeze of a trigger.
> Booster gun with 360? Z swivel provides up to 69 mpa (10000 psi).
> Air pressure range of 400-850 kpa (60-125 psi) works off small compresso
Cost : £ 513.48

ANTI-FATIGUE RIBBED MATTING WDTH 600MM PER LINEAR MTR. BLK > Manufactured from 100% closed cell vinyl foam.
> Ribbed surface enhances footing and minimizes slipping.
> Cushion effect reduces operator fatigue.
> Insulates against cold concrete floors.
> Easily cleaned with a mild detergent.
> Availa
Cost : £ 21.09

Computer Accessories > Specially designed for large textbooks and manuals.
> Two adjustable clips hold the pages of thick textbooks.
> Designed to conventially clip into a 2 or 4 ring binder for a portable workstation.
> Nine height adjustments. Book lift Copyholde
Cost : £ 7.4

1500MM TWIN PRISMATIC CONTROLLER. > For use with batten fittings.
Cost : £ 12.93

OFFICE TABLE. HXDXW 740X730X 1200MM - MAHOGANY > General purpose office table.
> HxD: 740x730mm.
Cost : £ 78.73

NOZZLE AIR CAP & NEEDLE 1.5MM Quality suction feed spray gun is ideal for the keen hobbyist and semi professional user alike. It is particularly designed for use with receiver compressors. Fitted with variable fan width and flow controls. An excellent general purpose gun for all types
Cost : £ 12.93

GREY BLOCK CABINET. HXLXD 437X892X400MM > Fast assembly.
> Allows stacking up to 4 high.
> Made of very strong polystyrene.
> Maximum load: 30 kg per module.
> HxLxD: 437x892x400mm.
> Colour: black and grey.
> Sliding doors available as an optional extra.
Cost : £ 60.1

SHOCK ABSORBING CASTOR WHEEL DIA 100MM. 200KG CAP.. > Top plate fixing spring loaded castors.
> Ball bearing swivel head. Fixing Holes: To suit 10mm diameter bolts
Cost : £ 135.13

CIGARETTE DISPOSAL POWDER CTD. BIN. HXWXD 445X245X70MM. > Robust steel structure.
> Sloping top prevents. rubbish being place on top of bin.
> Cigarettes placed in bin out of sight.
> Internal baffles trap smoke and speed oxygen exhaustion.
> Quick and simple to empty with common key for all locks.
Cost : £ 111.92

"PIN HINGE DOUBLE DOOR WXD 36 X 75""" > Pin hinge double doors with locking handles and
3 point fixing.
> For 36 wide bays only.
N.B. 2 door plinths will be required for each bay fitted with doors
Cost : £ 144.58

MAGNETIC STAND. HXWXD 240X50X55MM > Powerful magnetic bases with on and off switch.
> Precision ground surface.
> Ref. 103-2045 has fine adjustment screw for quick and accurate settings.
Cost : £ 27.03

CONSTANT HEIGHT LEVEL TROLLEY CAPACITY 10 - 80KG > Sheet steel construction.
> Simple adjustment by reversible springs.
> 4x100mm diameter swivel castors; 2 braked.
> Blue epoxy paint finish
Cost : £ 864.8

8MM STAPLES X 2500 > Built-in safety trigger catch.
> 3.5m length cord gives a long reach and easy accessibility.
> Universal magazine for both staples or brads enables a variety of applications.
General Purpose Tacker
> Loading capacity: 175 staples.
> Stapl
Cost : £ 4.17

G. PURPOSE OFFICE SHELVING 1980X915X457MM. BLUE/GREY > Seven level bay; each level comprises 4 steel support beams and a 15mm thick high density chipboard shelf.
> 915mm wide bay - shelf capacity: 205kg UDL; bay capacity: 1580kg UDL;
> 1220mm wide bay - shelf capacity: 182kg UDL; bay capacity: 1580kg
Cost : £ 142.18

Projecting Signs >Signs comply with BS-5499-1.
>Produced on semi-rigid plastic sheet.
>Pre-drilled for screw fixing.
>Supplied flat - easy to bend to shape.
>Each side measures 150x150mm.
>Projection when fitted: 135mm.
>Fire extinguisher and running man
Cost : £ 12.93

TOWER SHELF - BEECH > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 53.46

CONFERENCE MEETING TABLE. 720X1600X800MM. BEECH > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 163.33

Garment Racks > Metal coat/hat unit with large chrome hook end fittings. Wall Units
Cost : £ 39.95

TURNTABLE FOR SKATES UP TO 50 TONNE. > Skates - cast spheroidal graphite bodies and case hardened steel chain. Use as single or multiple units.

Accessories:
> Turntables - locate on top of skate. Use to control direction of load.
> Height Equalizers - use in conjunction with tur
Cost : £ 87.54

GREY VINYL WORKSURFACE. WXD 1500X600MM > Range of replacement worksurfaces.
> In many situations a workbench frame remains usable whilst the worksurface has deteriorated and needs replacing or upgrading.
> 2mm grey vinyl bonded onto 18mm MDF with wooden or plastic edges.
Cost : £ 132.78

S/BRASS CASEMENT STAY 100MM For use on windows or doors. Supplied complete with fixings. --
Cost : £ 2.02

30LTR HINGED LID CONTAINER. 30LTR CAP. GREY. > Containers with integral hinged lid.
> Lid held firmly closed by 2 clips on each side.
> All containers are European standard sizes.
> Colour: grey
Cost : £ 19.39

'OCTO' ADJ. WORKBENCH. SOLID BEECH. 2000X750MM - BLUE >Working height adjustable between 700-950mm.
>System allows for easy adjustment to the desired height.
>Large 40mm thick work surface in a choice of finish.
>Epoxy paint finish.
>Colours: blue/silver or graphite/silver.
>Supplied flat pack
Cost : £ 508.19

TWO TIER LOCKER. WXD 300X300MM CAM LOCK > Colour: dark grey body with light grey door.
> Two tier locker - equal sized compartments with individual locking doors. Fitted with 2 coat hooks per compartment.
Cost : £ 78.14

RUBBER TYRED 3 WHEELED TRUCK STEEL PLATFORM - CAP 150KG Welded tubular steel framework. Fitted with 2x125mm diameter fixed castors and 1x100mm swivel castor.
Cost : £ 108.45

STANDARD DUTY HYGIMAT. ROLL LXW 10M X 1200MM - TERRACOTTA Resilient to oils and fats. Flame retardant to DIN 4102. A choice of standard or heavy duty loose lay mats.
Cost : £ 829.55

ENGINEERS D/END SCRIBER 200MM Double ended hardened scriber with straight and 90° points. Display packed. --
Cost : £ 2.91

VERTEX COUPLING BODY 1/2''F For use with standard adaptors. BSP taper. Double action mechanism prevents accidental disconnection and makes the coupling particularly suitable for trailing hose applications. Maximum airflow rate 1197L/min (42cfm) at 6.9bar (100psi). Maximum working pr
Cost : £ 7.59

"3 SHELF OFFICE/IND. CUPBOARD. O/A 72X36X18"". LIGHT GREY" > All steel riveted/welded construction.
> Semi-concealed hinges for security and clean line appearance.
> Rubber grommets fitted for secure door fit and quiet operation.
> Doors fitted with stiffeners for added strength and security.
> Metal
Cost : £ 266.55

115MM DIAMOND BLADE LASER -ABR --
Cost : £ 36.85

PACK OF 25 OYSTER PACKS LXWXH 246X216X55MM. PER 25 > Manufactured from high quality rigid corrugated paper with a white mottled
outer liner.
> Budget range of die-cut boxes with soft profiled pads included.
> Supplied assembled with a cleverly designed closure.
> 7 useful sizes available?
>
Cost : £ 37.89

500W HALOGEN LAMP/TELESCOPIC Manufactured to IP44 Specification
230V 500W halogen lamp on sturdy telescopic stand. The lamp has diecast aluminium body with adjustable mounting bracket. Tripod base can be adjusted as can the overall height from 1.1M (approx.) to a maximum of 2M (ap
Cost : £ 30.74

WARDROBE RACK WITH 3 HOOKS LENGTH 410MM > Extruded aluminium.
> Colour: satin anodised.
Cost : £ 29.49

Post Mounted Signs >All signs comply with BS 5499-1 and The Health and Safety (Safety Signs and Signals) Regulations 1996. For areas where there is no wall on which to mount a sign.
Cost : £ 45.24

STANDARD FELT NOTICE BOARD. SINGLE DOOR.1200X900MM. GREY > Single Door.
> Tamperproof notice boards designed to protect displayed information.
> Standard felt notice boards accept velcro as well as pins and are colour fast to BS1006.
Cost : £ 183.3

WORKS TRAFFIC STANCHION SIGNS --
Cost : £ 89.3

WALL/COLUMN JIB CRANE. SWL 125KG - WORKING RADIUS 4000MM > Safe Working Load (SWL) 125kg.
N.B. The load capacity = 125kg less the weight of the hoist or lifting gear used.
> Horizontal member constructed from uniquely profiled rolled steel section that allows travel gear to run freely and smoothly - resis
Cost : £ 932.95

WHITE PACKING FOAM. ROLL LXW 120M X 1500MM - 5+ PKS > Dust and lint free.
> Water resistant and non-abrasive.
> Choice of standard white foam or heavy duty
blue with extra thick ribbing.
Cost : £ 66.98

INERTIA BALANCERS 8 - 11KG CAPACITY >An economical range of inertia balancers available in two types - spring actuated or air operated.
>Will accomodate tools weighing from 0.5kg to a massive 24kg.
>Used in their simplest form the balancers can be suspended from any convenient locatio
Cost : £ 63.57

EXTRA LOW HEIGHT CYLINDER. 88.8 TONNE CAP. 152MM DIA. > Maximum load achieved at 700bar.
> Hand pump fitted with 1.8m long hose.
> Test certificate and operating instructions supplied.
Cost : £ 1199.68

ANVIL PATTERN SECATEURS 175MM General purpose secateur with one “Teflon-S“ coated blade for smooth corrosion-free operation. The moulded spring-loaded handles have a wrist strap and thumblock for secure locking of the blades. Display packed. --
Cost : £ 9.71

BISLEY SIDE OPENING TAMBOUR CUPBOARD. HGHT 1980MM. BLACK > Welded steel body.
> H1000mm: central single point locking mechanism with cylinder lock.
> H1980mm: 3 point locking mechanism fitted to doors.
> Fire resistant PVC tambour doors with metal end tambour.
> Adjustable shelves with under-rail se
Cost : £ 495.85

NEOPRENE G.P RUBBER SHEETING 6MM THICKNESS. LXW 10 X 1.4M >A commercial grade of Neoprene/SBR blended general purpose sheeting with resistance to grease some inorganic chemicals and oils with good ageing and weathering charateristics. Working temperatures between minus 30 to plus 100 degrees C.
>Available in
Cost : £ 405.38

G. PURPOSE OFFICE SHELVING 1980X1220X610MM. GREY/GREY > Seven level bay; each level comprises 4 steel support beams and a 15mm thick high density chipboard shelf.
> 915mm wide bay - shelf capacity: 205kg UDL; bay capacity: 1580kg UDL;
> 1220mm wide bay - shelf capacity: 182kg UDL; bay capacity: 1580kg
Cost : £ 176.25

STANDARD MAGNIFIER - WHITE >Fully spring balanced arms with external springs
>Fitted with 100mm diameter 3 diopter (1.75X) magnifiying lens.
>ES bulb holder suitable for 60w GLS or daylight bulb.
>Multi bracket for wall or table clamp mounting.
>Available in blck or wh
Cost : £ 38.78

13MM CHAIN - GRADE G8 - EXTRA METRE Chains and Fittings
Cost : £ 11.99

RED ACOUSTIC DOME - O/A HXWXD 790X740X560MM Glass fibre reinforced plastic domes with black edge trim.
Designed to fit above a payphone or for internal or external installation of wall mounted telephones.
Standard unit.
Cost : £ 325.48

CROSS DIVIDER. HXL 55X196MM > Enables the user to choose individual components to produce tailor made fitments for the storage of small components and cylindrical tools.
> Our comprehensive selection of standard drawer divider kits is also listed in the cabinet tables; this provi
Cost : £ 1.65

ARCA DESK.HXWXD 720X1200X800MM ALUMINIUM/MAPLE > Desktops are 25mm thick with shock absorbing ABS edging.
> Central support beam with cable management capacity.
> Metallic legs in aluminium epoxy lacquered steel.
> Desk height: 720mm. Floor level adjustment for easy levelling.

Desk wi
Cost : £ 220.49

SELF ADHESIVE CORRUGATED PAPER SIZE 460X580MM. PK 200 SHEETS > 100% recyclable.
> Absorbs impact and secures
contents during transit.
> No need for tape or staples.
> Supplied in packs of 200.
Cost : £ 76.38

PLASTIC SHELVING. WXDXH 1000X400X1820MM > Hygienic.
> Maintenance free.
> Easy to clean.
> Suitable for the food industry.
> Easy to assemble with a game of module.

Features:
> Square profile of 50 x 50 mm with round angles.
> Heat resistant between - 40 and 80 degrees
Cost : £ 175.08

4X15.8MM RIVET(50 PER CARD) Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed. --
Cost : £ 1.79

STACKING TRAY. O/A LXW 762X457 48LTR CAP. SOLID SIDES & BASE. > Available in three heights.
> All trays interstack with each other.
> O/A LxW: External - 762x457mm.
Internal - 715x412mm.
> Secure cross stacking of trays and lids improves air circulation thereby accelerating product cooling.
> Slide s
Cost : £ 14.69

NYLON LINE 6M X 1.4MM (2 PCS) For use with Draper Garden Trimmer Spools. Pack comprises two lines 6M x 1.4mm diameter. Display carton. --
Cost : £ 4.32

'V' GROOVED CAST IRON WHEEL - WHEEL DIA 125MM - BALL BEARING --
Cost : £ 41.71

"3 TIER EDUCATION LOCKER HXWXD 70X12X15"".TWO TONE BROWN/BEIGE" School Lockers - available in 2 or 3 tier.
> Each compartment is supplied with an adjustable removable shelf.
> O/A HxWxD: 1778x305x381 mm.

Student Lockers - available in 4 tier.
> Capable of accommodating large school bags.
> O/A HxWx
Cost : £ 148.4

HANDLE FOR SKATES UP TO 50 TONNE. > Skates - cast spheroidal graphite bodies and case hardened steel chain. Use as single or multiple units.

Accessories:
> Turntables - locate on top of skate. Use to control direction of load.
> Height Equalizers - use in conjunction with tur
Cost : £ 16.45

FOLDING TABLE BUFFET/ADULT L1220XW685XH760MM AILSA GREY > Strong Polyurethene edge.
> Hygenic wipe-clean surface.
> Strong construction.
> A heavy duty table for heavy duty use.
> An ideal emergency table for the office.
> Combines Posi-lock with Polyedge.
> Folds flat for storage.
> Teste
Cost : £ 203.28

CHROME PLTD DOUB. R/HOOK 170MM Chrome plated solid brass. Size 170mm. Supplied complete with fixings. Display packed. --
Cost : £ 2.27

Tool tray > A range of optional accessories which adapt a basic bench to suit almost any requirement.
> The bolt-on facility enables accessories to be easily and quickly repositioned or moved to another bench.
> Under bench service box can be fitted verticall
Cost : £ 30.84

PK OF 2 WHITE LONG KNOBS 25MM DIA. M6 THREAD INSERT. QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 11.16

PACK 10 STEEL M4 SHORT KNURLED NUTS. --
Cost : £ 4.58

CAST IRON WHEEL DIA 250MM --
Cost : £ 55.81

PACK OF 20 AA CELL DURACELL PROCELL ALKALINE BATTERIES > Heavy duty alkaline batteries for industrial and business users.
> Efficient operation over a wide range of temperatures.
> Excellent resistance to vibration and shock.
> Guaranteed leak proof under normal conditions.
> Each battery date sta
Cost : £ 15.28

K30 SERIES PLATE FIXING Fixed --
Cost : £ 33.49

S.S WALL TABLE. HXWXD 850X650X 1200MM. > Worktops are manufactured from 1.5mm (16swg) grade 304 stainless steel. Supported by an
underframe constructed of 2mm (14swg) grade 430 stainless steel.
> All units have 65mm downturns with safety returns.
> Wall units have a 65mm upstand and r
Cost : £ 446.5

Ground anchor kit including tool > Manufactured in tough impact resistant polyethylene.
> Front door opening has slam-shut action ensuring fast and easy removal of litter.
> Galvanised sheet steel liner.
> Integral deflector prevents litter dropping between bin and liner.
> H
Cost : £ 186.83

5 PLACE CYCLE RACK LXWXH 1340X 345X170MM. > Suitable for standard or mountain bicycles.
> Free standing or floor fixing (fixings not supplied).
> Manufactured from galvanised steel tube.
Cost : £ 118.09

INT. VEHICLE FLEXIDOOR HXW 3200X1000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 168.03

REAR MODESTY PANEL - BENCH LENGTH 1200MM >Range of optional accessories which adapt any of the popular models to suit your individual requirements.
Cost : £ 54.7

GLACIER BOTTLE COOLER. COLD/ AMBIENT > Available cold/ambient or hot/cold.
> Cold water chilled to 10 degrees centrigrade and hot to 85 degrees centrigrade.
> Unit comes with refillable 19ltr polycarbonate water bottle.
> Fill either with tap or mineral water.
> HxW: 910 x 275mm.
Cost : £ 350.21

FLAT DECK TRAILER C/W SIDES 2000X1000X500MM. SOLID. Basic Specification - Flat Deck Trailer
> Timber deck.
> fully welded chassis - constructed from tubular steel and angle sections.
> Ball bearing turntable steering.
> Tubular 'A' frame towing bar with 100mm diameter tow-ring.
> Towing bar
Cost : £ 776.68

PACK 200 YELLOW WASTE SACKS TO SUIT REFUSE SACKHOLDER > Manufactured from recycled low density polythene.
> Gauge: 140g.
> HxWxD: 865x740x455mm.
> Supplied in carton of 200 sacks.
Cost : £ 32.31

HOLSTER FOR MANUAL NOZZLE >Die cast aluminium body.
>D- manual cut off. 25mm BSP connection. Spring loaded flow valve
>E -For pumped systems with a maximum pressure of 50psi.
Automatic cut-off. 19mm or 25mm. BSP connection -adaptor included.
Cost : £ 12.22

PACK OF 10 SANDING SHEETS. 240 GRIT. > Sanding sheets available in three different grades. Supplied ready punched with Velcro in packs of 10.
Cost : £ 7.64

GLAZED FRONTED LETTERBOARD - HXW 1228X925MM - GREEN > Grooved felt covered board with gold colour trim for attractive appearance.
> Changeable letters simply push inand pull out.
> Covered in quality felt for long lasting good looks.
> Attractive curved and mitred in gold finish.
> Supplied wit
Cost : £ 650.95

PACK 2 S/STEEL M5 KNURLED NUTS QTY 6+ PACKS --
Cost : £ 8.93

FLAT DECK TRAILER 1525X760X527MM PNEUMATIC WHEEL Basic Specification - Flat Deck Trailer
> Timber deck.
> fully welded chassis - constructed from tubular steel and angle sections.
> Ball bearing turntable steering.
> Tubular 'A' frame towing bar with 100mm diameter tow-ring.
> Towing bar
Cost : £ 544.03

FLAT DECK TRAILER SOLID WHEELS 2000X1000X500MM. Basic Specification - Flat Deck Trailer
> Timber deck.
> fully welded chassis - constructed from tubular steel and angle sections.
> Ball bearing turntable steering.
> Tubular 'A' frame towing bar with 100mm diameter tow-ring.
> Towing bar
Cost : £ 589.85

FOLD BACK CLIP - 19MM. PK 10 > Pack of 10
> Colour Black
Cost : £ 1.29

'OCTO' ADJ. WORKBENCH. SOLID BEECH. 2000X750MM - GRAPHITE >Working height adjustable between 700-950mm.
>System allows for easy adjustment to the desired height.
>Large 40mm thick work surface in a choice of finish.
>Epoxy paint finish.
>Colours: blue/silver or graphite/silver.
>Supplied flat pack
Cost : £ 508.19

520ML `CRC ZINC' SPRAY. This is a galvanising zinc-rich (> 98%) coating. It prevents the formation of rust and provides long term protection for all types of ferrous metals against aggressive external factors. In areas where galvanised surfaces have been damaged or modified by d
Cost : £ 7.99

K152 IRON SWIVEL CASTOR 200MM DIA. BALL BEARING. Fixing holes: To suit 12 mm diameter bolts
Cost : £ 150.4

DUST EXTRACTION ADAPTOR 36 and 58mm DIAMETER ACCESSORIES
NOT suitable for for Stock No.59311 or 50583 --
Cost : £ 2.23

PACK OF 25 YELLOW A4 SUSPENSION FILES > An international suspension file in A4.
> Glued metal suspension bars.
> Flexible plastic tab 5 cm.
> Tabs and inserts are included.
> Packed per 25 in a box.
Cost : £ 9.99

10 NYLON LOCK NUT - M10 Zinc plated nylon for corrosion protection.. Supplied in boxes of 100 (approx.) or polybags of 10 (approx.) --
Cost : £ 0.71

"SLIM WARDROBE CUPBOARD. O/A HXWXD 72X24X18"". BROWN/BEIGE" > All steel riveted/welded construction.
> Semi-concealed hinges for security and clean line appearance.
> Rubber grommets fitted for secure door fit and quiet operation.
> Doors fitted with stiffeners for added strength and security.
> Metal
Cost : £ 217.55

BLOCKBOARD WORKSURFACE - WXD 1500X750MM - > Range of replacement worksurfaces.
> In many situations a workbench frame remains usable whilst the worksurface has deteriorated and needs replacing or upgrading.
> 18mm blockboard with wooden edge sealed with clear polyurethane varnish.
Cost : £ 102.81

B191 VEHICLE FLEXIDOOR HXW 3200X2000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 314.9

PK OF 2 YELLOW LONG KNOBS 35MM DIA. M6 THREAD INSERT QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 13.51

"3 SHELF OFFICE/IND. CUPBOARD. O/A 72X36X18"". LT.GRY/GREEN" > All steel riveted/welded construction.
> Semi-concealed hinges for security and clean line appearance.
> Rubber grommets fitted for secure door fit and quiet operation.
> Doors fitted with stiffeners for added strength and security.
> Metal
Cost : £ 266.55

FOUNDATION END PIECE - TUBE DIA 60.3MM >Reinforced polyamide.
>Stainless steel lock screw.
>Recommended tightening torque: 2kgm.
Cost : £ 15.28

ALUMINIUM HAND WHEEL WITH TWO SPOKES. DIA 250MM. QTY 6+ >Hand wheel with two spokes.
>Aluminium. Hub with central hole.
Cost : £ 41.71

CUSHION TYRES & POLYPROP CENTR WHEEL DIA 200MM - ROLLER BRG --
Cost : £ 9.52

FRET SAW FRAME 295MM THROAT Plated frame with wooden handle and supplied complete with blade. Throat depth 295mm. Display packed. --
Cost : £ 5.52

200MM HAND FILE-SECOND (12) Manufactured in accordance with BS498:1990
With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Sold in boxes without handles. --
Cost : £ 23.49

TOOL KIT Comprehensive kit for all major servicing work. Packed in blow moulded storage case with display sleeve.
Contents;
• cotterless crank extractor.
• 8mm hexagon wrench.
• self adhesive puncture patches.
• bottom bracket cu
Cost : £ 67.64

EXTRA ADJUSTABLE SHELF FOR 500MM CABINETS > Shelf: adjustable shelf available to give extra storage facility.
> Top tool tray: 25mm high top perimeter safe edge with fully welded corners.
> Protective mat: 3mm ribbed rubber mat which can be used in conjunction with top tool tray or by itsel
Cost : £ 20.8

WIRE MESH BASKET - BLUE - HXWXD 578X430X290MM >Plastic coated wire mesh.
>Can be wall mounted.
>HxWxD: 578x430x290mm.
Cost : £ 47.0

TRIMMING KNIFE BLADES 100 H/D > Reversible polished steel blades with accurately ground cutting edges.
Cost : £ 9.75

5 SHELF ELIPSE SHELVING. KIT D Available in a choice of 3 or 5 shelf units.
Units are supplied in colours as follows:
Kit A - Beech shelves with black supports.
Kit B - Beech shelves with blue supports.
Kit C - Maple shelves with green supports.
Kit D - Maple shelves wit
Cost : £ 79.9

STRAIGHT ALUMINIUM CRANK HANDLE. LENGTH 125MM. QTY 6+ >Complete product with DIN98 aluminium rotating handle. Hub with central hole.
Cost : £ 24.09

MINI FLIGHTED ELEVATORS. MODEL 1 - BELT WIDTH 300MM > Angle side guides fitted as standard.
> Endless vulcanised PVC flighted belt (see flight combination table).
> Belt support on horizontal and incline - formed mild steel slider bed.
> Belt speed - standard 0.5m per second N.B. Any speed on re
Cost : £ 2623.78

PLASTIC BOX HXWXD 55X144X144MM > Enables the user to choose individual components to produce tailor made fitments for the storage of small components and cylindrical tools.
> Our comprehensive selection of standard drawer divider kits is also listed in the cabinet tables; this provi
Cost : £ 2.41

BENCH TOP FIXED BACKPANELS. LOUVRED. HXW 457X2000MM > Supplied in 1500 and 2000mm lengths.
> Fully reinforced panels for strength.
> Supplied c/w universal fixing brackets and all fittings suited to most worktop types.
> Epoxy coated in contrasting blue/grey.
> Louvred version with bin kit from
Cost : £ 163.21

160L GRN POLYETHYLENE STORAGE CONTAINER. LXWXH 820X460X715MM > Rotationally moulded in food grade polyethylene.
> Smooth snag free interiors.
> Inert to a wide range of chemicals.
> Temperature range -20 degree C to +60 degree C.
> Static Containers - fitted with 2 zinc plated metal handles.
> Mobile
Cost : £ 121.03

PNEUMATIC TYRED POLYPROP.WHEEL DIA 260MM. ROLLER BEARING --
Cost : £ 28.2

BANQUET CHAIR - CHROME FRAME - JUNIPER > Available in a choice of fabric as shown. Please specify. Clipper will be supplied as
standard.
> Frame: black or chrome. Please specify. Black supplied as standard.
> Seat width x Seat depth x O/A height x seat height:
431x584x870x463mm.
Cost : £ 79.14

COMPACT SGLE DOOR TOOL LOCKER 762X457X305MM. GREY/RED Compact Single Door Tool Locker.
>Epoxy polyester powder coated paint finish.
>Flush top with 2 adjustable shelves.
>Cam lock door lock with 2 keys supplied.
O/A HxWxD: 762x457x305mm
Cost : £ 68.56

UNI-PAC BOOK BOXES. 280X220X50MM - PER 100 > Self-adhesive strip for easy sealing.
> Maximum depth of contents 50mm.
> Easy to assemble.
> Available in 5 sizes.
Cost : £ 100.82

PK OF 2 BLUE LONG KNOBS 35MM DIA. M6 THREAD INSERT. QTY 6+ >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 13.4

200 GOLDSCREWS C/SUNK 4.5X60 PZ TYPE products are compatible with *Pozi/Supadriv fixing systems.
Deep cut 40° lubricated angle threads for fast driving especially in chipboard and MDF. Case and through hardened to prevent snapping. 25° point requires no pre-drilling. Yel
Cost : £ 3.18

VICE PLATE FOR 1200MM BENCH Range of optional accessories.
Cost : £ 20.15

SAW BLADE TCT 250X30MMX80T Quality tungsten carbide tipped (T.C.T) blades hardened and strengthened to ensure a long life. Display packed. Unit of Sale: 1 blade. --
Cost : £ 50.9

"4 SHELF H.D EXTENSION BAY - SHELF DTH 24"" - OPEN ALL ROUND" > Four and six shelves.
> Standard or heavy duty.
> Choice of 3 shelf depths.
> Initial Bay and Add-on bays.
> Supplied with black plastic feet.
> Standard HxW: 72x36.
Cost : £ 139.59

High Sided Container Trucks - 500kg Capacity --
Cost : £ 459.13

Outdoor Portable Spectator Seating > Superb three-tier wheelaway seating unit with capacity for 15-18 persons.
> Constructed from 38mm square section polyester painted steel tube.
> Complete with detachable upper tier backrest.
> Wooden seating laths.
> 100mm universal castors
Cost : £ 1326.4

PLASTIC ROLLER SHUTTER. 1905X915X460MM. COLOUR BELOW > Strong construction.
> All doors are fitted with full height stiffeners.
> Welded door frames for added strength and stability.
> All shelves and accessories are adjustable on 25mm pitch which offers full flexibility.
> Durable powder coated
Cost : £ 331.23

PAINTED GAS CYLINDER WALL RACK WXD 710X140MM. FOR 2 CYLINDERS > Paint or galvanised finish.
> Drilled for wall fixing.
> Retaining chains fitted as standard.
> Units available fitted with security bar incorporating padlock facility (padlock not supplied).
Cost : £ 48.76

POWDER COATED TRAY CLEARING TROLLEY. HXWXD 1490X1012X426MM > Manufactured from 25mm round tube.
> Fitted with 100mm diameter castors.
> Accept trays: 457x346mm.
> Special size trolleys can be made to suit any tray size. Contact our customer call centre for further details.
> Available in a choice of f
Cost : £ 415.95

GRP GATEHOUSES WXLXH 1200X2400X2250MM AS SPECIFIED > Manufactured in glass reinforced plastic from a single moulding without joints.
> Fully insulated with high density CFC free polyurethane foam.
> Interior finished in washable fire retardant textured coating.
> Floor - insulated 3mm ribbed rubb
Cost : £ 3220.68

SECRETARIAL DESK. RIGHT HANDED WIDTH 1600MM - BEECH > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 420.65

OIL FILTER WRENCH (300MM CAP) Heavy duty webbing strap 1000mm x 38mm with 3/8“ x 1/2“ square drive/21mm x 13/16“ AF cam for tightening. Cam has plated finish for corrosion protection. Display packed. --
Cost : £ 6.32

INT. VEHICLE FLEXIDOOR HXW 3200X1500MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 256.15

H.DUTY FRAMED FOLDING TABLES LXW 1830X610MM AS SPECIFIED Choose from 15 laminate colours and 3 different heights to ideally suit your particular requirements.
Ideal for more demanding environments.
Construction as Standard Range but with strengthened legs - steel core with aluminium cladding.
Cost : £ 139.83

K30 SERIES PLATE FIXING Fixed --
Cost : £ 48.18

RUBBER WALL BUMPER - PER 12M COIL (WXD 60X30MM) > Easy to fix to walls and around concrete or steel columns and bollards.
> A pre-drilled stainless steel strip runs through the middle of the profile. Holes are set at 75mm centres to provide a choice of fixing points.
> Mitre to fit into internal
Cost : £ 354.85

CARRIER. CAP 1 TONNE. O/A LXWXH 500X350X115MM > For transporting machinery and heavy.
> Welded steel construction in enamel finish.
> Deck covered in anti slip rubber.
> Solid nylon rollers with enclosed ball bearings.
> Maintenance free.
> Load capacities assume even distribution.
Cost : £ 87.01

BEECH LOW BOOKCASE. HXWXD 730X800X305MM > Robust construction.
> 18mm worktops with 1mm protective edge.
> Heavy duty drawer construction.
> Metal to metal fixings.
> Lockable drawers and doors.
> Bookcases and double door fronted cupboards available in varying heights.
> Col
Cost : £ 57.16

CUT/WHEEL-STONE.100X2.5X16.0MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade C30-S-BF 80 medium hard. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 0.8

PACKHAM BENCH - 2400MM LONG GROUND FIXING > Timber slats 110x95mm.
> Front and rear timbers are each splayed towards central slat to create slightly dished seating surface for extra comfort.
> Black plastic coated frames.
> Timber colour: light mahogany. Other shades available upon req
Cost : £ 480.58

50 METRE 13AMP CABLE REEL Complies with BS1363A and BS EN61242 Specifications. BSI Approved.
Industrial quality 240V AC. cable reel with double socket plate. Two lengths available 30M and 50M. Sold loose.
*Maximum load fully unwound. If the cable reel is used fully wound the
Cost : £ 35.27

PDQ STANDARD WORKBENCH. HXWXD 915X2400X900MM. > Full width 18mm chipboard worksurfaces.
> 300kg undistributed working load for worktop.
> Complete with metal footplates and full assembly instructions.
> Supplied flat packed for self-assembly.
> Bench allows operator to be either seated or
Cost : £ 114.45

ADJ.STANDS WITH LEVEL.PLATE GALV.ROD LENGTH 170MM. >Fine thread for very precise level adjustment and resistance to very heavy loads.
>Effectively absorb vibrations.
>Reduce noise and provide machine stability.
Cost : £ 44.65

1/2''TAPER X 1/2''HOSE CONN'TR ½“ thread size with BSP taper. Display packed three tailpieces per card. --
Cost : £ 5.62

EXTRA/M S.S. CHAIN FOR FOUR LEG SLING - 16MM DIA > Chain hooks c/w safety catch.
> Test certificate supplied with each sling.
> Standard length 1 metre EWL.
Cost : £ 989.35

5 SECTION SURVEYOR'S LADDER MAX. LENGTH 4.5M > Strongly made 915mm long aluminium ladder sections.
> Integral spigots enable sections to be securely joined to obtain the required working length.
> Ideal for transporting in a car boot.
Cost : £ 273.78

4 DRAWER DESK HEIGHT PEDESTAL WXDXH 420X800X720MM.CHERRY TOP > WxH: 420x720mm.
> Available in two depths: 600 or 800mm.
> Made from one piece lacquered sheet steel in graphite grey.
> Supplied complete with pen tray in the top drawer.
> Central locking.
> Floor level adjusters.
> 25mm thick tops i
Cost : £ 467.65

PACK OF 25 OYSTER PAKS. LXWXH 275X180X80MM > Manufactured from high quality rigid corrugated paper with a white mottled outer liner.
> High crush resistance.
> Quick and easy to use.
> Suitable for despatch via parcel post.
Cost : £ 54.4

"SNAPPER FRAME. MOP SIZE 18""." A unique interchange mopping system that
allows all mops to fit on to one type of handle.
> The frame is needed for fitting to the handle and the white syntex looped heads are for mopping the floor. The heads can be replaced as and when required.
Cost : £ 20.56

TENNIS COURT BROOM. LENGTH 1370MM - SOFT BRISTLE > Smooth handle.
> 1370mm long.
> 915mm wide head.
> Reinforced with metal stay.
Cost : £ 30.32

SINGLE FLANGED CAST IRON WHEEL WHEEL DIA 250MM - BALL BEARING --
Cost : £ 180.95

4000KG CAP LOWLINE CRANE JIB. EXTENDING JIB > Instant drive-in fitting by one man.
> Positive fixing behind fork heels. Fitt
Cost : £ 1004.63

Special CCTV Signs > All signs 1mm thick rigid PVC Personalise your CCTV signage in line with the Data Protection Act Sound and images are being recorded...
Cost : £ 32.31

1.1/4 X 1.3/8 LARGE BOW SHACKL SWL5T 15CWT SCREW PIN --
Cost : £ 46.41

PK OF 10 DOUBLE PRONG ANGLED HOOK TOOLHOLDER. LXDIA 25X4MM > Zinc plated
> Can be located at any position where holes appear.
> Securely located by a plastic clip.
> Quickly and easily repositioned when necessary.
Cost : £ 14.98

"K165 -PK 8 THREADED SOCKETS TO SUIT 11/8""X11/8""X18G.M8 THREAD" > Adjustable feet - with fixed or tilting stems.
> Threaded sockets - for fixing feet into tube.
> Blank sockets - to neaten tube ends.
Cost : £ 2.0

FLAT DECK TRAILER C/W SIDES 1525X760X500MM. SOLID. Basic Specification - Flat Deck Trailer
> Timber deck.
> fully welded chassis - constructed from tubular steel and angle sections.
> Ball bearing turntable steering.
> Tubular 'A' frame towing bar with 100mm diameter tow-ring.
> Towing bar
Cost : £ 699.13

ANTI-VIBRATION MOUNTING.2 NUTS USAGE RANGE 10-52. >Technical characteristics:
Natural frequency: 8 - 10 Hz.
Load range: 4 daN - 136 daN
>Usage:
Traction isolation system.
Filtering of vibrations and reduction of their acoustic effects.
Operating temperature:
-40?C to +70?C.
>Appli
Cost : £ 15.28

"4 TIER EDUC.LOCKER HXWXD 70X18 X18""L/GREY BODY BLUE DOORS" School Lockers - available in 2 or 3 tier.
> Each compartment is supplied with an adjustable removable shelf.
> O/A HxWxD: 1778x305x381 mm.

Student Lockers - available in 4 tier.
> Capable of accommodating large school bags.
> O/A HxWx
Cost : £ 164.74

PK OF 2 YELLOW LONG KNOBS 35MM DIA. M8 THREAD INSERT. QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 14.69

EXTRA COST FOR EXTENDED HEIGHT 2.21M RISING TO 2.59M > Instant permanent or temporary secure storage building.
> Simple and rapid assembly procedure requiring only two people and a spanner.
> Manufactured entirely from steel to offer total security and ultimate strength.
> Delivered flat packed for
Cost : £ 74.03

BLUE TISSUE PAPER SHEET SIZE 500X750MM. QTY 5+ PACKS. > Paper grade: 18gsm.
> Supplied in packs of 480 sheets.
> Available in 4 colours.
Cost : £ 14.1

TELESCOPIC SACK TRUCK. CAP. 75KG - PNEUMATIC WHEELS > Tubular steel construction.
> Telescopic handle locks in extended and closed positions.
> Folding toe.
> Solid rubber tyres.

150kg capacity
> HxW: 1160x430mm.
> Folded height: 730mm.
> Toe WxD: 350x460mm.
> Weight: 10kg.
<
Cost : £ 65.8

Disposable paper bags for wall mounted bin SANITARY BINS AND ACCESSORIES
Cost : £ 67.56

PDQ SHELVING. 5 SHELF LEVELS 1980X1200X300. BLUE/GREY > Bay capacity: 2500kg.
> Capacity per shelf: up to 375kg UDL.
> Entirely boltless.
> 4 sided access as no back bracing is required.
> Components simply tap together.
> Easily adjustable shelf heights.
> Extra thick chipboard shelves.
Cost : £ 120.73

2 DRAWER + 1 FILING DRAWER PEDESTAL. 725X415X800MM.LT.OAK > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 144.53

BLANKET. Set comprises:
> A - Treatment couch with adjustable headrest.
> B - Polyester filled pillow.
> C - Scarlet cotton blanket.
> E - Workstation with lockable drawers and doors. O/A HxWxD: 1200x915x457mm. Epoxy powder coated finish.
> F - 12lt
Cost : £ 36.43

GREEN KEEPER. LXW 1500X900MM BLUE >Supplied in mats and rolls. Mats are bordered on all 4 sides and the rolls have a border on both long edges.
>The polypropylene surface is solution dyed for superior colour fastness in all extremes of sunshine and weather all year round.
>Ideal fo
Cost : £ 44.06

Clear Stationery Tape > Ideal for general office use.
> Light duty.
> Easy to tear.
> Roll length: 66 metres.
> Supplied in packs of 12.
> Desk dispenser also available. Desk dispenser
Cost : £ 3.88

PACK OF 10 INSERT PANS - SIZE 130X130X100MM Range of Optional Extras to suit Tote Pans
Cost : £ 20.8

7.6 LTR DISPENSING SAFETY CAN. SPOUT DIA. 15MM > With flexible spout.
> Terne plate construction.
> Double wall perforated flash arresters at fill opening and base of pouring spout.
Cost : £ 187.82

EXTRA SHELF - DEPTH 450MM > Slim side wall upright allows full width of the shelf to be accessed.
> All units supplied with 6 shelves.
> Slim profile shelf allows maximum use of the unit height.
> Shelves are adjustable on 25mm increments allowing full flexibility in shel
Cost : £ 13.98

PLASTIC LABELS LABEL SIZE 80X45MM - PACK > Tough plastic or metal labels to ensure packages are clearly identified and reduce the risk of loss.
> Secure label to parcel using the metal label clips (available separately).
> Both metal and plastic labels can be marked easily with a fibre tip
Cost : £ 48.76

COMFORT LOK MATTING INTERLOCKING MIDDLE PIECE > Manufactured from hardwearing rubber.
> Capable of operating in high temperature environments.
> Diamond surface provides exceptional slip resistance.
> Interlocking system enables user to produce required length.
> Offers fatigue relief and
Cost : £ 47.0

OPEN TOP METAL CONTAINER 200ML 74X74MM PLAIN INTERNAL PACK 96 > All sizes come with plain or lacquered tinplate internals.
> Internally lacquered cans are suitable for water based products.
> All containers have welded side seams and resealable lids.
> 2.5 litre upwards have bale handles.
> Refs.170/171T
Cost : £ 69.91

NESTING WORK PAN - HXWXD 150X610X455MM > Choice of Stacking or nesting pans.
> Spot welded galvanised steel.
> Reinforced rim.
> Half-lift handles.
> Capacity: 25kg.
Cost : £ 14.98

A1 NOTICE BOARD 900X680MM. > Three sizes of boards available.
Cost : £ 69.33

DRAWER DIVIDERS TO SUIT DRAWER WIDTH 750MM. HGT 100MM. PER 3 >To suit 750 or 500mm wide drawers.
>100 or 200mm high.
>Supplied in packs of 3
Cost : £ 8.99

RIGHT HAND LARGE CUPBOARD TO SUIT NON-STEEL TOPPED BENCH >Range of optional accessories which adapt any of the popular models to suit your individual requirements.
>All accessories are finished in grey epoxy paint.
>Sliding door unit not suitable for 760mm high benches
Cost : £ 121.38

4PC.IMPACT BIT SET 8mm hexagon shank bits suitable for use with Stock No.81519 and 22322 Impact Screwdriver Sets. Display packed.
Contents:
• 2 plain slot bits: 8 and 10mm
• 2 PZ TYPE bits: No.2 and 3


PZ TYPE insert bits are compatible with *Po
Cost : £ 3.62

PK OF 2 BLACK LONG KNOBS 16MMM DIA M4 THREAD INSERT.QTY 1-5 >Stainless steel does not rust.
>This property of stainless steel means that the handle is not subject to rusting.
>These handles do not jam nor break as a result of ambient humidity. They have a long life length.
>Parts made from thermoset plast
Cost : £ 3.29

Spanner unit > The system is based on a range of tough metal panels perforated with a regular pattern of square holes.
> A wide variety of steel tools and parts holding accessories can be located at any position on the panelwork.
> Each accessory is designed to
Cost : £ 3.82

WORKBENCH - WXD 1200X900MM GRY LINO WORK SURFACE. H 914MM > 2mm lino on 18mm MDF with a wooden edge.
> Ready to use.
> Standard working height 840mm.
> Fitted with four adjustable feet.
> Full range of cupboard and drawer accessories (see facing page).
> Standard height: 840mm.
> Bench HxWxD: 1
Cost : £ 304.27

PLASTIC BOX C/W 360 ASST. GALV NUTS & BOLTS. QTY 10+ Contents: Nuts (dimension x quantity): 3x90 / 4x65 / 5x65 / 6x20. Bolts : (3x10)50 / (3x20)40 / (4x16)40 / (4x30)25 / (5x16)35 / (5x30)20 / (5x40)10 / (6x16)10 / (6x50)10.
Cost : £ 22.33

SAW BLADE TCT 184X30MMX40T Quality tungsten carbide tipped (T.C.T) blades hardened and strengthened to ensure a long life. Display packed. Unit of Sale: 1 blade. --
Cost : £ 19.62

METRIC OPEN ENDED SPANNER 13X17MM X 205MM LENGTH Open ends set at 15 degree
Cost : £ 3.35

INITIAL BAY SELF-SUPPORTING RACK UNIT. 1880X2760X860MM > Initial and add-on bays.
> Initial bay consists - 2 uprights and
> 1 set of cross bracing.
> Add-on bay consists: 1 upright and 1 set of cross bracing together with fixings for joining to initial bay.
> Distance between levels: 250mm.
Cost : £ 411.25

"EXTENSION BAR 1/2"" DRIVE X 125MM LENGTH" >Manufactured from chrome vanadium steel.
>Spring loaded ball bearing for secure socket holding.
Cost : £ 4.41

1KG LOST HEAD NAILS 65X3.35 1 kg (approx.) bags of zinc plated nails. --
Cost : £ 1.81

2.5MM BALL END HEXAGON KEY Hexagon keys with ball end on the long arm and conventional ends on short arm. The ball type hexagon tip allows the hexagon key to be used up to 30° angle from the screwhead recess. Chrome vanadium steel hardened and tempered. Sold loose. --
Cost : £ 0.4

WALL HOLDER SET AT 45 DEGREES C/W WALL FITTINGS. > 'U' shaped unit designed to hold cycle wheel.
> Suitable for standard or mountain type cycles.
> Welded galvanised steel construction.

Wall holder
> 90 angle unit - suitable for most situations.
> 45 angle unit - ideal for situations
Cost : £ 27.61

Broom heads and Handles > Varnished head complete with bracket.
> 76mm stiff bristles.
N.B. Colour of bristles may change. Practical and hardwearing range of broom and brushware manufactured to provide good service and long life. Green stiff PVC Fill Brooms and handles
Cost : £ 6.58

INDUSTRIAL BENCH SCALES. CAP 50/110KG.LXWXH 310X275X35MM. > One key operation.
> Stainless steel platforms.
> Easy to clean and maintain.
> Switchable reading: metric/imperial.
> Tare facility.
> Mains operation or battery pack (supplied).
Cost : £ 494.68

EXTRA CHAIN PER METRE - 10MM DIA 2 LEG > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 30.55

MOBILE FUEL RETRIEVAL UNIT > 80 litre capacity steel container.
> Aluminium rotary pump delivers fuel at rate of 30-40 litres per minute.
> Integral 400 micron flame arrester filter.
> Fully earth bonded and fitted with two crocodile clips.
> 2.5m long fuel grade hose w
Cost : £ 538.15

Single drawer unit WORK UNITS
Cost : £ 269.08

FREEWAY 2 DRAWER FILING CABINET. 730X482X600MM. BEECH >Lockable with handles.
>Fitted with drawer selector device
and height adjustable feet.
>All accept foolscap files.
N.B. two drawer side filing
unit also accepts A4 files.
>Supplied assembled.
Cost : £ 318.43

DOUBLE SPEED HAND WINCH C/W H/BREAK + WIRE ROPE.CAP.1590KG > One piece pressed frame - zinc plated.
> Heat treated pinion gears and ratchets.
> Standard mounting holes.
> All models in ranges A to E available fitted with wire rope.
Cost : £ 420.65

CLIPTITE HELMET ACCESSORIES CLIPTITE EAR DEFENDERS Visors
> Supplied complete with carrier for fitting to helmet.
> Aluminium rim for added strength and shape retention.
> Polycarbonate - for resistance to particle impact. Kitemarked and tested to EN 166. B.3.9.
> Acetate - for protection agai
Cost : £ 13.51

EXTRA FOR SHORTENING CLUTCH 13MM DIA 3 LEG > A proven range of slings manufactured from high tensile steel alloy. Heat treated to provide wear resistance and high fatigue strength. Easy and safe to handle.
> Conforms to BS 4942: Part 1 and 5: 1981 (ISO 1834 and 3076-1980).
> Slings supplied
Cost : £ 165.68

PACK OF 10 SELF-ADHESIVE TICKET HOLDERS. HXL 25X1000MM >Magnetic or self-adhesive backing.
>Bar codes can be read through the clear plastic.
>Insert cards are included.
Cost : £ 33.49

GARDEN 1/2 HOSE CONNECT W/STOP --
Cost : £ 1.08

51MM 6 PIECE TOOL KIT > 610mm wide bolt-on cast aluminium fixed floor tool for 2 motor models on caddy.
> Dump valve fitted to canister for quick and easy emptying of fluids without removal of motor head.
> Black plastic coated wire tool basket suitable for models on cad
Cost : £ 187.77

4'' BRASS VIC. LEVER LATCH-PAI Polished and lacquered. Brass handles supplied complete with follower bar and fixings. For internal use. Carton packed. --
Cost : £ 4.36

UNIVERSAL WIRE CLAMP. WIRE DIA 18MM >Universal wire clamp for round cables.
>Many applications.
Cost : £ 5.41

EXTRA LOW HEIGHT CYLINDER. 43.5 TONNE CAP. 114MM DIA. > Maximum load achieved at 700bar.
> Hand pump fitted with 1.8m long hose.
> Test certificate and operating instructions supplied.
Cost : £ 552.25

VERTICAL/HORIZONT BANDSAW 230V No-volt switch.
A versatile three-speed machine offering horizontal and vertical cutting capabilities. Designed for use in the maintenance workshop. The 350W motor gives smooth and accurate saw blade transmission through the adjustable ball bearing gui
Cost : £ 335.78

TOWBAR >Wire mesh extension side/end frames. Height: 610mm. Fold flat when not in use.
>Towbar avaiable at extra cost - this can be interchanged with the 'T' type bar
Cost : £ 36.43

ADJUSTABLE WORK TABLE 500 > Available in 4 sizes.
> Adjustable to 4 different angles.
> Compatible with matching heat sealer.
Cost : £ 90.48

DOCK BOARD. O/A WXL 1830X910MM CAPACITY 5450KG > Anti-slip tread plate - design keeps edges flush with dock or truck during loading/unloading operation.
Safety side curbs fitted as standard.
Cost : £ 837.78

2MM DIA 6 X 7 FMC GALV WIRE ROPE 50M COIL > Wire rope manufactured to current British Standards.
> Test certificate can be issued to show sample breaking strains.
> WLL based on 5 to 1 safety factor.
> Straining screws are of equivalent breaking strength to wire rope.
Cost : £ 34.08

2000 NAILS 70MM For use with Draper Nailer or Combination Nailer/Stapler and other manufacturers similar machines.
Sold in boxes. --
Cost : £ 27.13

SPARE GEARED CHUCK MT2 16MM Manufactured to exacting standards from fully hardened tool steel. Female mount. Supplied complete with chuck key. Display packed. --
Cost : £ 32.82

Individual Cabinets The range of Key knockdown benches can be complemented by the addition of extra suspended cabinet and cupboard units. -- Single drawer unit
Cost : £ 179.36

38LTR DISTRIBUTION CONTAINER. LXWXH 610X400X240MM - BLUE > Reduce packaging waste.
> Avoid unnecessary repacking.
> Designed to minimise nesting volume (70%).
> Conform to Euro sizes.
> Comfortable handling due to generously spaced and ergonomic handgrips.
> Colour: dove-blue.
> Labels area.
Cost : £ 20.56

MONITOR RISER - GREY ASH > Sturdy construction with epoxy powder coated steel frames and hard wearing foil finish.
> Cable outlets on all desks and VDU tables.
> All desking is 800mm deep and 720mm high with adjustable feet.
> Supplied flat packed for easy self-assembly.
Cost : £ 61.1

HEAVY DUTY SHELVING. TUBULAR SHELVES. 1260MM WIDTH 400MM D. > Available in 2 widths and 5 depths.
> Adjustable in 62.5 mm increments on uprights.
> Choose between tubular or welded sheet steel shelves.
> Tubular shelves:
shelf depth 400 / 500 mm = 3 cross-members;
shelf depth 600-1000 mm = 5 cross-m
Cost : £ 31.14

20 PIECE HOOK KIT FOR PERFORATED PANEL. > Cupboards require three panels.
> Supplied complete with fixings and finished in RAL 7001 grey.

Ref. 2302B074N
> 20 piece assorted hook kit for door inners and perforated back panel.

Ref. 2304B074N
> 23 piece hook on bin kit for u
Cost : £ 37.37

METRIC COMBINATION SPANNER 32MM X 395MM LENGTH >Ring end cranked at 15 degrees
Ring ends have 12 corners with special radius design giving added torque.
>Open end ste at 15 degrees.
>Manufactured to DIN 3113 specification.
Cost : £ 16.45

COMFORT PLUS BUMP CAP - RED. PER 10 > Moulded high density polyethylene.
> Fitted with adjustable inner harness and sweatband.
> Four point webbing suspension harness.
> Kitemarked and tested to EN 812.
Cost : £ 55.81

WORKBENCH ACCESSORIES- LOUVRED PANEL & CLIPBOARD. 1800MM. > Please remember when ordering accessories rear support legs ref. 2975R035N must also be ordered.
Cost : £ 172.26

STANDARD DRUM PALLETS WITH SPLASHBACK. 1400X800X350MM. > Standard pallets or pallets fitted with splash back and sides.
> Manufactured from 2.5mm mild steel sheet.
> Fully welded liquid-tight seams.
> Removable galvanised mesh grid deck.
> Fork pockets - HxW: 80x170mm.
> Finished in chemical an
Cost : £ 569.99

EXTRA FOR MOBILE GANTRY 2 FOOT OPERATED SWIVEL & WHEEL LOCKS Optional extras factory fitted to Mobile Gantries:
>Foot operated wheel locks fitted to 2 wheels.
>Set of parking jacks.
>Polyurethane wheels fitted in lieu of cast iron wheels
Cost : £ 173.9

Weylux Industrial Weighing Scales Wheels
Cost : £ 107.51

100 BRASS TRA.S/SCREW 2.1/2X8 Traditional style with tapered shank giving dowel effect. Lacquered and rustproof - ideal for harsh environments. Packed in boxes of 100 or 200 (approx.) screws. --
Cost : £ 7.5

3/4 X 7/8 ALLOY D SHACKLE SWL 4.75 TON - SCREW PIN --
Cost : £ 8.64

1 HR CHARGER FOR 14.4V (2AH) To charge the batteries used in the Draper Cordless Drills. 230V AC Charging time 1 hour (approx.). Display packed. --
Cost : £ 27.87

METRIC COMBINATION SPANNER 11MM X 152MM LENGTH >Ring end cranked at 15 degrees
Ring ends have 12 corners with special radius design giving added torque.
>Open end ste at 15 degrees.
>Manufactured to DIN 3113 specification.
Cost : £ 3.0

TOOL HANDLING AND STORAGE Heavy gauge sheet steel construction.
> Full length piano hinged lids.
> Removable tote tray.
> Turned safety edges and padlock facility (padlock not supplied).
> Hard wearing blue hammer finish. Barn Tool Boxes
Cost : £ 19.92

BRASS CYLINDER PADLOCK 20MM Draper Security Rating: 2
A quality lock with plated steel shackle brass body and cylinder. Supplied complete with two keys. Key blanks are available. Display packed. --
Cost : £ 1.83

6X60 S.S. SCREW GATE CARBINE HOOK W/O EYELET > Pear shaped hooks.
> Conform to AISI 316 standards.
Cost : £ 8.34

7X70 S.S. CARBINE HOOK C/W EYELET - BREAK LOAD 750KG > Pear shaped hooks.
> Conform to AISI 316 standards.
Cost : £ 5.46

GAS CYLINDER FLOOR RACK.SINGLE SIDED. HXWXD 921X440X710MM > Welded steel construction.
> Drilled for wall or floor fixing.
> All racks 921mm high.
> Security bar - drilled to accept padlock (padlock not supplied). Purchase separately as and when required.
Cost : £ 99.29

SCHOOLS/CLUB TRAINING BIBS - LARGE RED - PACK 10 > Manufactured from nylon.
> Elasticated/ velcro fastening sides.
Cost : £ 51.47

HALF HINGED LID FOR 1140MM LONG CONTAINER.PLYWOOD INFILL. > Factory fitted optional extra
> Security lid for 1140mm long container.
> Security lid for 1340mm long container.
> Security Lid - factory fitted optional extra.
> Steel framework infilled with mesh or plywood and hinged to main body of the
Cost : £ 103.28

9.5MM SWITCHBOARD MATTING. ROLL WXL 1220MM X 10M > The use of this matting is a vital safety requirement in situations where workers at switchgear and electrical equipment are at risk from electrical shocks.
> Slip-resistant.
> Available in rolls and cut lengths.
> Colour: black.
Cost : £ 669.75

33LTR HINGED LID CONTAINER. 33LTR CAP. GREY. > Containers with integral hinged lid.
> Lid held firmly closed by 2 clips on each side.
> All containers are European standard size.
> Colour: grey
Cost : £ 28.79

SHELVING KIT. 2 BAY. O/A WIDTH 2475MM. 5 SHELVES 600MM DEPTH Constructed from 4 standard components which easily slot together to form versatile bays - no nuts or bolts required.
1 Base Frame - 25mm square steel tube.
2 `H> Section - 25mm square steel tube.
3 Connecting Rod - round section.
4 Shelf
Cost : £ 296.1

'Taktyle' Braille Signs >Manufactured and moulded matt finish plastic to prevent reflection.
>Patented locating ring - guides the hand to the centre where the information can be easily found.
>Smooth contour lettering and pictograms.
>Self adhesive backing for instant f
Cost : £ 25.85

CAST IRON WHEEL DIA 150MM --
Cost : £ 18.21

GREY ACOUSTIC DOME. O/A HXWXD 790X740X560MM Glass fibre reinforced plastic domes with black edge trim.
Designed to fit above a payphone or for internal or external installation of wall mounted telephones.
Standard unit.
Cost : £ 325.48

PVC SHRINKFILM CENTREFOLD 700MM X 1400M > Centre folded on a roll.
> 19 micron thickness.
> Roll length: 600 metres.
Cost : £ 135.13

GRIND/DISC-MET. 115X6.0X22.2MM Glassfibre reinforced cold pressed resinoid bonded aluminium oxide. Grit grade A24-R-BF 80. Maximum working speed 80m/sec. Sold loose. --
Cost : £ 1.1

MULTI-PANEL 450MM HIGH FOR 1200MM BENCH Range of optional accessories.
Cost : £ 122.61

3/8'' DOUBLE ENDED CONNECTOR Sold loose. --
Cost : £ 1.37

PACK OF 50 OYSTER PAKS. LXWXH 500X250X78MM > Manufactured from high quality rigid corrugated paper with a white mottled outer liner.
> High crush resistance.
> Quick and easy to use.
> Suitable for despatch via parcel post.
Cost : £ 188.24

INT. VEHICLE FLEXIDOOR HXW 3600X4000MM EXACT SIZE BELOW Quick hang flexidor can provide the following benefits:
> Keep heat in.
> Keep cold and draughts out.
> Reduce damage from driving rain.
> Form noise barriers.
> Reduce cold air loss in chill/freezer rooms.
Quick hang rail comes in 984mm
Cost : £ 668.58

LOWBAY LUMINAIRE WITH 250W MBF/U MERCURY LAMP > CE marked.
> Manufactured to IP20.
> Suitable for mounting heights above 3.5 metres.
> Removable gear tray.
> Universal fixing arrangement.
Cost : £ 71.68

SELF ADHESIVE CORRUGATED PAPER ROLL WXL 300MM X 100M > 100% recyclable.
> Absorbs impact and secures
contents during transit.
> No need for tape or staples.
> Supplied in packs of 200.
Cost : £ 43.48